







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Unilock Bathroom Remodeling: The Sunrise Manor Owner’s Guide
If you have a failing Unilock component in your bathroom, we work with Unilock Porous Paving (S Series) modular shower base kits, and a full bath surface package in Sunrise Manor typically runs $9,000 – $28,000 installed. Small bathrooms land at $5,000 – $12,000, and walk-in shower conversions at $4,500 – $12,000. Scheduling usually takes one to two weeks, not same-day, because the pore-sealed base needs a leak test before we set anything over it. Replacing one failed cartridge, tile set, or cartridge housing inside an existing Unilock setup is far cheaper than a full redo; most owners discover the problem after they call it in the instant a slow leak surfaces beneath the base or the paver-textured shower pan starts pooling water.
That said, most “failed” Unilock bathroom installs we get called to in Sunrise Manor aren’t actually failed. They’re a drained-out basemat, a tile-to-base joint that gave up, or a cartridge needing a swap. The right fix depends on which one you’re holding.
Key Takeaways
- Installed range in Sunrise Manor: $9,000 – $28,000 for a full Unilock bath package; $5,000 – $12,000 for small baths.
- One-part repairs: usually $200 – $900 installed, depending on which component failed.
- Warranty on the work: 365 days from the completion date.
- Written price before any tool comes out – not a verbal estimate.
- Water first: never cover a Unilock base you haven’t flood-tested. One in five callbacks we see in Sunrise Manor start there.
Which Unilock Models This Applies To

Unilock makes two family lines that find their way into residential bathrooms here: the S Series modular shower base systems and the Porous Paving based tile plank and slab sets. If you don’t know which you have, flip to the drain trim or the underside lip of the shower base. Unilock parts carry a stamped model code – usually a four-part alphanumeric string – followed by the nominal dimensions, such as 60 x 32 or 48 x 36. That stamped code is what determines which cartridge, drain adapter, and tile-base coupling ring you need.
The classic mistake we see in Sunrise Manor: choosing a vanity or shower valve based on the tile style listed on the box rather than the model code on the base. Unilock uses two different coupling adapters within the same Porous Paving line, and the wrong one leaks – not immediately, but within six to twelve months as the gasket softens. We’ll match by the stamped code before we order anything.
OEM vs. aftermarket: for a Unilock cartridge or basemat, the OEM is usually worth it. For tile, drain grates, and shower hardware, quality aftermarket parts often outperform OEM at lower cost. We’ll tell you which side of that line your part sits on the first time we look at it.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Unilock Bathroom Remodeling Is Failing
Five symptoms we hear most often from owners in Sunrise Manor:
- Water pooling under the shower base. Usually a failed seam between the basemat and the substrate, or a coupling gasket that’s lost its seal. Given the summer slab movement here, Unilock’s Porous Paving base can shift slightly and open the gasket – the leak doesn’t show until it does.
- Loose or hollow-sounding tile. Almost always a bond failure at the thin-set. Unilock Porous Paving set slabs need to be set over a properly compacted and cured substrate; on new builds and older Sunrise Manor homes, the substrate is where we find the issue first.
- Grout cracking along the seam lines. Normal for grout to crack as the frame settles. If the cracking is opening the same line twice in twelve months, the frame is moving and the anchor points need checking.
- Cartridge leaking at the base of the handle. A wear item, not a failure of the whole valve. Replacement cartridges last three to five years in Sunrise Manor’s hard water; a swollen cartridge in the fifth year is normal, not an emergency.
- Slow, uneven drain flow. Could be a hair clog (owner-fixable) or a damaged drain body (not). If plunging makes it worse, stop – the drain body may be cracked.
Replacement Cost & What’s Included

Here’s how pricing lands in Sunrise Manor for the Unilock bath package, so you can self-qualify before you call:
| Scope | Installed range |
|---|---|
| Full Unilock bathroom remodel (base, tile, trim, valve) | $9,000 – $28,000 |
| Small bathroom remodel | $5,000 – $12,000 |
| Walk-in shower installation | $4,500 – $12,000 |
| Tub-to-shower conversion | $3,500 – $10,000 |
| Shower replacement (base + surround) | $3,000 – $8,500 |
| Bathroom vanity installation | $800 – $3,000 |
| One-part repair (cartridge, drain body, grout line) | $200 – $900 |
What drives the range: substrate condition (a rotten floor deck adds $800 – $2,000), whether the wall tile comes out with the base, whether the valve body needs swapping, and tile selection. Every project comes with a written price before any work starts – no surprise line items on the final invoice, which is the part most homeowners get blindsided by in Sunrise Manor. Our written guarantee covers the installation for 365 days from the completion date. If a repair or install fails, we come back at no charge – no dispute process, no conditions.
See the difference
Before
After
Before
After
Before
AfterDIY or Call Us?
Some of this is safely owner-checkable. Whether you want to DIY the rest is worth weighing against the safety risk, and on a Unilock bath, the risk isn’t the tile – it’s what’s behind it.
- Safe to check yourself: the model code on the base or drain trim, the drain grate (torque-free), the cartridge handle (remove, inspect, reinstall), and the grout lines for uniformity of cracking.
- Where DIY goes wrong: resealing a shower base with caulk over a wet gasket only hides the leak. Pulling the valve body without shutting off both supply lines can flood the wall cavity in minutes. Relaying a Unilock Porous Paving base without re-compacting the substrate is the mistake we fix most often; a re-set that skips the compaction step will fail again, usually within the same year.
- Skip DIY entirely: anything that means opening the wall behind the valve. Have a licensed professional handle it. Water behind the wall is the one thing that turns a $900 repair into a $4,500 repair in a hurry.
If you’re not sure which category your Unilock bath is in, call us and we’ll tell you on the phone.
FAQs

How long does a Unilock bathroom remodel last? Ten to fifteen years for the base and tile when the substrate is properly prepared and the gasket is inspected every couple of years. Cartridges and drain bodies are wear items – three to five years on cartridges is normal here in Sunrise Manor’s hard water.
Can I repair it instead of replacing the whole bath? Usually, yes. If a single cartridge, drain body, or grout line is the problem, a one-part repair runs $200 – $900 installed. We only recommend a full replacement when the substrate is compromised or the base has cracked through. Call us for an exact quote – the estimate is free.
How long does the swap take? A single-part repair is typically a two-to-four-hour visit. A shower base replacement takes one to two days. A full Unilock bath package runs seven to ten working days, weather permitting. We’ll give you the exact schedule with the written price.
How do you source the Unilock part? Mason Remodeling is an independent service provider and is not affiliated with Unilock. We source authorized Unilock OEM parts through their dealer network and specify exact model codes when we order, so nothing gets swapped for a look-alike. We don’t carry Unilock parts on our trucks; we order to spec, which is why installation scheduling is one to two weeks rather than same-day. Quality aftermarket equivalents are available for non-critical items when they outperform OEM. We also work with KraftMaid, Cambria, and Silestone on other finishes in the same bathroom.
Ready to Schedule
Every Sunrise Manor visit from Mason Remodeling is by a background-checked, identity-verified technician in a clean marked uniform, and you’ll receive their name and photo before the visit plus a photo ID badge at the door – that’s The Threshold Standard, and it applies on every job. We’ve been part of the Threshold Group since 2004, and our technicians bring up to 22 years of experience. Whether it’s a Unilock cartridge swap or a full Unilock bath package, you’ll get a written price before any tool comes out and a written guarantee for 365 days from the completion date. Call (855) 606-6122 for a free estimate. A live person answers 24 hours a day, every day of the year.
Written by the team at Mason Remodeling Sunrise Manor, serving Sunrise Manor and nearby areas.












