







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Toto Bathroom Remodeling: The Sunrise Manor Owner’s Guide
A Toto bathroom remodel in Sunrise Manor typically runs $9,000 – $28,000 installed, with small baths landing in the $5,000 – $12,000 range and a Toto toilet or fixture upgrade alone priced far lower as part of the project. We install Toto-compatible fixtures and finishes, and we deliver a written price before any work begins. Most owners discover the problem by symptom, not by model number: a fill valve that hisses for 40 seconds after every flush, a flapper that lets the tank refill at 2 a.m., a seat hinge that cracks at the mounting boss after years of Sunrise Manor’s hard water, or a supply line that beads moisture at the ferrule.
Which Toto Models This Applies To

Toto’s residential toilet lines split into a few families that matter for part matching. The Drake and Eco Drake (CST743, CST776) use a fairly standard 3-inch flapper and a fill valve you can cross-reference easily. The Ultramax II and Vespin II are one-piece units, which means the tank-to-bowl gasket and the trip lever assembly are model-specific and not interchangeable with two-piece parts. Washlet and integrated bidet seats (S550e, C200, K300) carry their own control boards, inlet filters, and seat hinges that vary by generation.
Identify your unit before ordering anything. Pull the tank lid and look for the model code stamped inside the tank wall, usually a series of letters and numbers such as “CST776CEFG.” A photo of that stamp plus the supply-line connection type is worth more than any guess. Toto’s GMAX and Tornado flush systems use different fill valves, so getting the flush technology right prevents a second trip.
On the OEM-versus-aftermarket question, Toto parts cost more but fit first time. Quality aftermarket fill valves and flappers work fine in Drake and Eco Drake tanks; we don’t recommend aftermarket for one-piece gaskets or Washlet electronics. Mason Remodeling Sunrise Manor is an independent service provider and is not affiliated with Toto.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Toto Bathroom Remodeling Is Failing
- Constant running after the flush settles. The flapper isn’t sealing against the valve seat, usually because mineral scale from Sunrise Manor’s hard water has built up a ridge. A flapper that looks fine can still leak below the waterline where you can’t see it.
- A hissing or whining fill valve. The fill valve diaphragm has stiffened or the float has drifted. In Sunrise Manor, we regularly see this accelerate in summer, when high mineral content combines with heat cycling to wear rubber parts faster than in softer-water climates.
- Water pooling at the base of the toilet. Usually a failed wax ring or a loose closet bolt, not the toilet body. Left alone, moisture wicks into the subfloor and can soften the floor around the flange.
- A Washlet seat that won’t heat or spray. The inlet filter is clogged or the control board has failed. Hard water scale in the bidet nozzle assembly is a common culprit in Southern Nevada.
- A rocking toilet or cracked tank. A failed flange or overtightened tank bolt. Both are signs the install needs to come apart, not just a part swap.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

Here’s what a Toto-compatible bathroom remodel runs in Sunrise Manor. These are installed ranges, parts and labor together, not a parts catalog price:
| Project | Installed Range |
|---|---|
| Full bathroom remodel (Toto fixtures) | $9,000 – $28,000 |
| Small bathroom remodel | $5,000 – $12,000 |
| Walk-in shower installation | $4,500 – $12,000 |
| Tub-to-shower conversion | $3,500 – $10,000 |
| Shower replacement | $3,000 – $8,500 |
| Bathroom vanity installation | $800 – $3,000 |
What drives the range: fixture tier (a basic Drake versus a Washlet-equipped one-piece), whether the floor or subfloor needs repair around the flange, tile and waterproofing scope, and whether plumbing walls move. We give you a written, line-item price before any work starts, so the fixture line and the labor line are separate and visible. The work is covered by a written guarantee with terms stated plainly, and a free return visit if an installation fails.
DIY or Call Us?
Some of this is safe to check yourself. You can lift the tank lid, read the model stamp, watch a dye test to confirm a flapper leak, and tighten a loose supply line by hand. Those checks cost nothing and tell us exactly what we’re dealing with.
Where DIY goes wrong: one-piece tank-to-bowl gaskets and closet flanges. Pulling a one-piece Toto tank without the right sequence can crack the ceramic at the bolt holes, and reseating a toilet onto a failing flange without repair means the leak returns in months. There’s no high-tension spring or live electrical work here, but a broken tank is a several-hundred-dollar mistake. Call (855) 606-6122 and we’ll tell you honestly whether it’s a part swap or a remodel.
FAQs

A Toto flapper typically lasts 3 – 5 years here, and a fill valve 5 – 7, shorter than the manufacturer’s general guidance because of our hard water and desert heat cycling. Washlet inlet filters want cleaning every few months to protect the nozzle assembly.
Yes, most fill valve, flapper, and seat failures are repairable with the right part. If the tank is cracked, the flange is broken, or the subfloor is soft, replacement or a remodel makes more sense.
A fill valve or flapper swap is a short visit, usually under an hour. A full toilet replacement or a remodel scope takes longer, and we schedule those with a written timeline before we start.
We match your model number to the correct Toto or quality aftermarket part before the visit, so we arrive with the right replacement rather than guessing on site. Call (855) 606-6122 for your free estimate.
Give us a call at (855) 606-6122 to schedule your free estimate. We’ll confirm your Toto model, walk you through the options in plain language, and put the price in writing before any work begins. We also work with KraftMaid, Cambria, and Silestone for cabinetry and surfaces. Mason Remodeling Sunrise Manor serves Sunrise Manor and nearby areas.
Written by the team at Mason Remodeling Sunrise Manor, serving Sunrise Manor and nearby areas.












