







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Therma-Tru Home Additions & ADU: The Sunrise Manor Owner’s Guide
We build Therma-Tru-compatible home additions and ADUs across Sunrise Manor, and most projects land between $45,000 and $130,000 depending on square footage, slab work, and how the new roofline ties into your existing house. Detached ADUs start at $90,000 and run to $220,000. The Therma-Tru part of the job is the exterior door package – entry, patio, and French systems – and it’s usually the first thing that tells us a structure is finished wrong, because a failing door swings, sticks, or leaks long before the rest of the build shows problems.
Owners in Sunrise Manor usually catch the issue after a monsoon season or the first hard summer, when heat and dust start working on a door that was never shimmed right. We see it as daylight at the strike plate, a scrape line on the threshold, or a hinge that pulls loose by August.
Which Therma-Tru Models This Applies To

Therma-Tru builds in several lines – Fiber-Classic, Smooth-Star, Classic-Craft, and the American Style and Benchmark panels – and the structural door system matters more than the panel when it’s part of an addition. Fiber-Classic and Smooth-Star are the common ones on Sunrise Manor additions. The key gotcha: a Therma-Tru slab is sized to the frame and sill system it was ordered with, not just the rough opening. A 36-by-80 door from one sill series won’t drop into another without the matching sill, and in desert builds the sill is exactly what dries out and fails.
Find the sticker or engraving on the hinge jamb or the top of the slab; it carries the series and size. Measure the rough opening, not the door. Then decide original-versus-aftermarket. Therma-Tru original sills, sweeps, and hinges fit the frame’s profile and keep your warranty chain intact. Quality aftermarket equivalents are cheaper, and for a cosmetic sweep that’s fine; for a sill channel on an exterior wall, we stick with the original because the drainage geometry has to line up. We’re Mason Remodeling Sunrise Manor, an independent provider, in no way affiliated with Therma-Tru.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Therma-Tru Home Additions & ADU Is Failing
- Daylight visible at the strike or top corner. The frame has racked slightly and the door no longer seats against the weatherstrip. In a Sunrise Manor addition, this is often slab settling under a door that was installed before the soil compacted.
- Threshold scrape and worn sweep. The sweep drags and erodes against the sill because the sill set too high or the slab dropped. This is the single most common exterior door call we get in Sunrise Manor.
- Stiff or noisy hinges. Heat cycling and fine desert dust work their way into the hinge barrel; the pin or the leaves are worn. On a lightweight addition door, a single worn hinge overloads the other two.
- Water at the interior threshold after rain. The sill’s drainage channel is blocked or the door’s sill pan was never sloped. This is a structural order-of-work issue, not a weatherstrip problem.
- Sagging or binding at the latch side. The deadbolt won’t line up with the strike. A dropping door or pulling hinge is the cause; both trace back to how the frame was anchored into the addition wall.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

A Therma-Tru frame or door system in a Sunrise Manor addition typically runs $1,200 to $4,500 installed for a standard exterior opening, and higher if the rough opening or framing has to be corrected. The full build is where the real budget lives: home additions at $45,000 to $130,000, detached ADUs at $90,000 to $220,000, and garage conversions at $30,000 to $80,000. What drives the range is slab and foundation work, roof tie-in, and how many Therma-Tru openings the design calls for.
We hand you a written price before any work starts – the full line-item, parts and labor separated, no verbal estimates. Every project carries a 365-Day Done Right Promise: if the work isn’t right within a year of completion, we fix it at no cost. If a repair or installation fails, the return visit is free.
DIY or Call Us?
A homeowner can safely check a few things: look for the daylight gap, run a hand along the threshold for the scrape, test every hinge by wiggling it, and check the deadbolt’s alignment. That tells you whether the door is binding or the frame has moved. What you shouldn’t do yourself is reset a sill in an exterior wall, re-shim a dropping frame, or correct drainage under a door that sits on an addition slab – get that wrong and water finds the interior. On additions, framing and structural door systems are a builder’s job, plain and simple.
Our technicians have up to 22 years of experience, are background-checked and identity-verified, and you’ll get their name and photo before they arrive. Call (855) 606-6122 and a live person answers, day or night.
FAQs

How long does a Therma-Tru exterior door last in Nevada weather? A properly installed Therma-Tru fiberglass door in Sunrise Manor will typically hold up 15 to 20 years, but the sill, sweep, and weatherstrip usually need replacing at the 8-to-12-year mark. The sun and dust wear the sweep faster than the slab. Call (855) 606-6122 for a free estimate on a refresh.
Can the door be repaired instead of replaced? Often yes. A worn sweep, a bad hinge, or a misaligned strike can be fixed for a fraction of a full replacement. Real repairs only fall short when the frame or sill has actually moved or rotted. Call (855) 606-6122 and a technician will tell you which it is.
How long does the swap take? A single exterior door swap in an addition runs half a day to a full day; resetting the sill and frame takes longer. For a whole addition, the door package is part of the build schedule, not a separate task. Call (855) 606-6122 to book your free estimate.
How do you source the Therma-Tru part? We source the original component through the Therma-Tru supply chain so the fit matches your series and serial, and we’ll use a quality aftermarket equivalent only when you ask and the profile matches. We don’t keep parts in stock – each part is ordered for your specific door. Call (855) 606-6122 to start.
Call (855) 606-6122 to schedule your free estimate. We serve Sunrise Manor, and we provide KraftMaid, Cambria, and Silestone product partnerships across our work as well.
Written by the team at Mason Remodeling Sunrise Manor, serving Sunrise Manor and nearby areas.












