







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Schluter Kitchen Remodeling: The Sunrise Manor Owner’s Guide
Kitchen remodeling in Sunrise Manor that includes Schluter waterproofing and trim systems typically runs $14,000 – $45,000 installed, with the tile-and-trim portion often representing $2,500 – $6,000 of that total. We install Schluter-compatible kitchens by appointment, and every project starts with a written price before work begins.
Most Sunrise Manor homeowners discover a problem the same way: a soft spot under the sink tile, a grout line that keeps cracking along the countertop edge, or a metal trim strip that has pulled loose from the backsplash and now catches a sponge every time you wipe down the counter. Those small failures are usually the visible end of something happening underneath – a movement joint that was never accounted for, a substrate that swelled, or a trim profile installed without the right fastening for stucco-on-frame construction common in this part of the valley.
Which Schluter Models This Applies To

Schluter doesn’t make “a kitchen part.” It makes a family of profiles and membranes, and the differences matter. The trim profiles most Sunrise Manor kitchens need are SCHIENE (straight edge protection where tile meets drywall or painted surfaces), JOLLY (a rounded-edge profile for coved or decorative transitions), RONDEC (a quarter-round edge for countertop-to-backsplash junctions), and QUADEC (a square-edge profile). Each comes in aluminum, stainless steel, PVC, and some in solid brass, and each is sized by the tile thickness it accommodates – typically 5/16″, 3/8″, 1/2″, and 9/16″ for common backsplash and floor tile. A 3/8″ SCHIENE simply will not hold a 1/2″ tile; it will sit proud or recessed and the grout will fail within months.
For waterproofing, the relevant products are KERDI-BAND, KERDI-FIX, and the KERDI-BOARD panel system. KERDI-BAND is the seam tape that joins membrane sheets; KERDI-FIX is the adhesive sealant for bonding to non-porous surfaces like a stainless sink flange or a quartz backsplash. Identifying the right part starts with two measurements: the tile thickness (calipers or a tape against a clean edge) and the profile length needed. Original Schluter profiles are the correct choice for color-matched finishes and for any edge that will see regular contact. Quality aftermarket equivalents exist for basic aluminum edges, but the stainless and anodized finishes rarely match, and the PVC profiles are noticeably thinner. We are an independent service provider, not affiliated with Schluter, so we source the specific profile your kitchen calls for rather than substituting a house brand.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Schluter Kitchen Remodeling Is Failing
Trim and waterproofing don’t announce themselves. They fail slowly, and the cue is usually cosmetic before it becomes structural. Five things to watch for:
- Grout cracking along the countertop-to-backsplash seam. That joint was likely grouted instead of caulked over a movement joint, and the two planes are moving independently. Schluter recommends a flexible sealant at changes of plane for exactly this reason.
- A trim profile rocking or pulling away from the wall. Usually the fastening was set into drywall only, not into framing or a proper substrate. In Sunrise Manor’s stucco-on-frame construction, exterior walls move seasonally and a profile anchored only to paper-faced drywall loosens within a few years.
- Dark discoloration at the bottom of the backsplash or behind the sink. Water is getting past a failed KERDI-BAND seam. Once water reaches the substrate, the fix is never just new caulk.
- Hollow sound when you tap tile near a Schluter edge. The thin-set has debonded, often because the membrane wasn’t properly embedded or the profile shifted before cure.
- Grout efflorescence or white powder at the floor-wall junction. Moisture is wicking through and evaporating at the surface, which points to a missing or bridged KERDI-BAND at the perimeter.
None of these are cosmetic. Each one gives water a path, and in a climate that swings from 30°F winter nights to 105°F summer afternoons, that path widens faster than you’d expect.
Replacement Cost & What’s Included

For Sunrise Manor, the numbers break down this way. A full kitchen remodel with Schluter waterproofing and trim runs $14,000 – $45,000. Narrower scopes are easier to price:
- Backsplash installation with Schluter profiles: $800 – $2,500
- Countertop installation with edge trim and seam work: $2,000 – $6,500
- Cabinet installation, including toe-kick and substrate prep: $4,000 – $13,000
- Kitchen island installation with Schluter edge profiles: $3,000 – $10,000
- Small kitchen remodel, tile and waterproofing included: $9,000 – $20,000
What drives the range is substrate condition (does the old membrane come out cleanly, or is there rot to address?), profile material (aluminum vs. stainless vs. brass), and whether the job is a straight swap or a layout change. Our written price itemizes the parts and the labor separately, so you can see exactly what a SCHIENE profile costs versus the install. The 365-Day Done Right Promise covers the work for 365 days from the completion date, and if anything fails within that window, we come back at no charge.
See the difference
Before
After
Before
After
Before
AfterDIY or Call Us?
You can safely check three things yourself: measure the tile thickness at the failed edge, photograph the profile from a few angles, and press gently on the surrounding tile to see whether it sounds hollow. That information helps when you call, and it’s the same information we’d collect.
Where DIY goes wrong is the repair itself. Removing a trim profile without chipping the tile takes a specific technique, and re-bedding a waterproofing seam requires the substrate to be dry, clean, and prepared to spec – moisture trapped under a new membrane will show up as mold behind the cabinet within a year. The bigger risk is this: the profile is not the problem. It’s the indicator. Prying off a 12-inch strip of SCHIENE to “replace it” without diagnosing why it failed almost always produces the same failure in the same spot. Call (855) 606-6122 and we’ll tell you straight whether you have a trim swap or a waterproofing repair.
FAQs

How long does Schluter trim and waterproofing last in Sunrise Manor? A properly installed Schluter profile and KERDI membrane assembly typically lasts 20 to 30 years in this climate, but the trim finish and the tile grout will show wear first – usually 10 to 15 years on the exposed edges. The number that matters more is 365: that’s how long our 365-Day Done Right Promise covers the installation.
Can this be repaired instead of replaced? Sometimes. A loose profile over intact membrane can be re-set. A failed KERDI-BAND seam can be repaired if caught before the substrate absorbs water. Once the substrate is soft or mold is present, the repair becomes a replacement. Call (855) 606-6122 and we’ll inspect and tell you which one you’re looking at.
How long does the swap take? A trim profile replacement on a backsplash runs one day. A waterproofing repair behind a countertop typically runs two to three days, because the tile has to come off, the substrate has to dry, and the cure times don’t compress. Full kitchen remodels with Schluter systems run four to eight weeks depending on scope.
How do you source the Schluter part? We order the specific profile by model, material, and tile-thickness size – SCHIENE in the correct dimension for your tile, KERDI-BAND in the correct width – from a distribution channel that verifies authenticity. We don’t stock parts in a truck or hold inventory; we order what your kitchen needs and bring it to your job. Call (855) 606-6122 to start with a free estimate.
What to Know Before You Book
Kitchens in Sunrise Manor are usually built as part of stucco-on-frame construction with drywall interior finishes, and both details affect how Schluter systems perform here. Stucco moves with temperature; drywall holds moisture. Between them, the joints at exterior walls get more stress than in a home built with brick or block. We plan for that by using a flexible sealant at every change of plane, not grout, and by checking substrate moisture before a single membrane panel goes down. We also work with KraftMaid and Wellborn cabinetry and Cambria and Silestone surfaces on these kitchens, so if the trim failure happened because a cabinet shifted, or the seam opened because a countertop settled, the whole assembly gets addressed instead of just the visible symptom.
Our technicians have up to 22 years of experience with tile, waterproofing, and trim systems. Every crew member is background-checked, identity-verified, and introduced to you by name and photo before the visit, with a photo ID badge at the door. That’s The Threshold Standard, and it applies on every job, every time. A written price comes first, then the work.
Call (855) 606-6122 for a free estimate – a live person answers around the clock, every day of the year. We’ll look at the Schluter part, tell you what’s behind it, and put the fix in writing before anything starts.
Written by the team at Mason Remodeling Sunrise Manor, serving Sunrise Manor and nearby areas.












