A Mason company - serving Sunrise Manor, NV
A remodeled primary bathroom with a soaking tub and a walk-in shower
Schluter · Sunrise Manor

Schluter Home Additions & ADU in Sunrise Manor, NV

Free Estimate on SiteCalls Answered by a Live Person, 24/7Background-Checked TechniciansA Local Team in Sunrise Manor
A low-threshold walk-in shower with a bench and grab bar
A powder room with botanical wallpaper and a stone sink
A wood double vanity with two mirrors after a bathroom remodel
A remodeled primary bathroom with a soaking tub and walk-in shower
A freestanding soaking tub in a remodeled primary bathroom
A walk-in pantry with wood shelving
A remodeled laundry and mudroom with a bench, cubbies and painted cabinets
A built-in window seat in a bay window
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate

Schluter Home Additions & ADU: The Sunrise Manor Owner’s Guide

We build and finish home additions and ADUs in Sunrise Manor using Schluter systems where tile meets floor, wall, and shower, and a typical addition runs $45,000 – $130,000 installed, with detached ADUs from $90,000 – $220,000. If you’re here because a Schluter profile, membrane, or trim piece has failed, you’re probably seeing a loose edge, a cracked grout line, or a hollow-sounding tile at the transition between your addition and the original house. That’s how most Sunrise Manor owners find us – the part didn’t announce itself, the floor did.

Call (855) 606-6122

An addition makes every one of those transitions harder. New slab meets old slab. New tile meets a 1950s porch. A Schluter profile is what bridges that gap cleanly, and when it’s the wrong size or wrongly seated, Sunrise Manor’s summer heat and monsoon moisture find it fast.

Key Takeaways

  • Schluter profiles and membranes fail at transitions first – that’s where you’ll see it.
  • We’re an independent contractor, not affiliated with Schluter. We install Schluter-compatible systems only.
  • Sunrise Manor’s 100°F-plus summers and hard water put real stress on any tile edge that isn’t seated correctly.
  • Your written price comes before any work starts, on every project – that’s standard, not an upgrade.
  • Call us at (855) 606-6122 – a live person answers, any hour.

Which Schluter Models This Applies To

A tile setter installing wall tile in a shower

Schluter makes dozens of profiles, and the naming trips people up. The profile you’re pulling off your addition’s edge is almost certainly one of these: SCHIENE (the sloped metal edge for tile-to-floor), RENO-U or RENO-TK (the ramp and T-shaped profiles that cover the step down to a lower floor – common where an addition sits a few inches above the original slab), DILEX (movement joints), TREP (stair nosings), and JOLLY (wall-corner trim). If the failure is under the tile rather than at the edge, you’re dealing with KERDI membrane or DITRA uncoupling mat.

Find the model on the flange or the plastic wrap before it’s gone; Schluter prints the profile name and dimensions right on it. The number that matters most is the inside height – the profile has to match the tile thickness plus the thinset layer. A SCHIENE at 3/8 inch won’t sit flush over a 1/2-inch porcelain, and that mismatch is exactly why so many Sunrise Manor additions show a lifted lip at the door threshold two summers in.

On new vs. the original: Schluter controls its own spec, so there’s no true aftermarket clone of a Schluter profile. There are quality equivalents from other manufacturers (Genesis, Blanke, Prova), and for a straightforward rectilinear edge they perform fine. For a complex shape, an anodized or brushed-finish profile, or anything under a wet-area membrane, we spec the Schluter part. Call (855) 606-6122 and we’ll match your profile to the right part size before we order.

Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence

Signs Your Schluter Home Additions & ADU Is Failing

Most Sunrise Manor failures show up as five specific things. Here’s what each one is telling you.

  • A lifted or loose edge profile. Thinset that was mixed too dry, or a profile set before the mortar skimmed over, never bonds fully. Heat cycling opens the gap.
  • Hairline cracks along the profile’s line. Usually a movement joint was skipped where the addition meets the original structure. The two slabs move, and the tile takes the stress.
  • Hollow-sounding tile at the transition. Water got under the KERDI or DITRA at an unsealed edge. Common after monsoon season, when the ground swells and the edge flexes.
  • Discoloring or efflorescence at the seam. Hard water from the tap plus salt from the slab is wicking up. Tells you the bond is compromised, not just a cosmetic stain.
  • A rocking or sharp step-down at the doorway. A RENO profile was set to the wrong height, or it was replaced once already and never sat flush.

If you’re seeing more than one, the profile isn’t the whole story – the substrate under it likely needs checking. That’s the point where a free second look saves a much bigger repair. Call (855) 606-6122 to set it up.

Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Replacement Cost & What’s Included

An open living space after a whole-home remodel

For a profile swap or a re-set at a doorway transition, most Sunrise Manor jobs run $450 – $1,200 in labor, depending on how much tile has to come up around the edge. Where the membrane under the tile has failed, the scope moves into a partial re-tile of the transition, and that’s where the numbers climb.

Scope Typical Installed Range
Profile / trim swap at one transition $450 – $1,200
Partial re-tile with new membrane at transition $2,000 – $6,500
Kitchen remodel (tile, trim, Schluter edge) $14,000 – $45,000
Bathroom remodel (full watertight system) $9,000 – $28,000
Home addition, finished $45,000 – $130,000
ADU construction $90,000 – $220,000
Garage conversion $30,000 – $80,000

What drives the range: how much tile has to come up, whether the substrate under it is sound, and whether we’re matching discontinued tile. On any addition, our written price lands before a tool comes out – parts, labor, and the finish line itemized. The work is backed by the 365-Day Done Right Promise: if it isn’t right within a year of completion, we come back and make it right at no cost to you.

DIY or Call Us?

Owners can safely do two things on their own: look for the profile name and size on the piece (or the original packaging), and press on the tile around the edge to hear that hollow sound. Both tell you what you’re dealing with. Neither involves a saw.

Where it goes wrong: pulling up a seated profile almost always cracks the tile behind it, and re-setting one requires the right thinset over the right height, cured properly. Set a Schluter profile with the wrong mortar or before the bed has skimmed and it fails again in a year – often worse, because now there’s tile missing. We don’t recommend it. Especially on a door threshold, that edge takes every footstep in the house.

Call (855) 606-6122 for a free estimate. Before we arrive, you’ll get the name and photo of the technician coming, and they’ll show an ID badge at the door. A live person answers any time – request a callback and we’ll confirm your window.

FAQs

A finished backyard cottage with a small covered porch

Ideas for every room in the house

Built-ins, window seats, family rooms and staircases: the changes that make a whole house work better.

Read our remodeling guides
A remodeled family room with new windows and a window seatA wide opening with a new beam where the kitchen wall was removedA stone counter, tile backsplash and open shelf after a kitchen remodelA remodeled primary suite with built-in wardrobes and a window seatA garage converted into a guest room and home officeNew painted shaker cabinets with an organized deep drawer

Explore more remodels

Every project below starts the same way: a free on-site visit and a written price.

Getting started with Mason in Sunrise Manor

Every project starts with a conversation and a written price. Here is how to take the first step.

A project lead measuring a kitchen with the homeowner during a free estimate

Free on-site estimate

A project lead walks the job with you, measures it and hands you a written, line-item price. No obligation.

Book an estimate
A remodeling crew arriving at a home with lumber and tools

Your Sunrise Manor team

A local vetted partner works across Sunrise Manor and the towns around it, to the same written standard as every Mason job.

Areas we serve
A worker laying floor protection and a dust barrier before work starts

Read our written promise

What we promise on every job, written down, with the terms spelled out before any work starts.

Our promise
Need Construction help nationwide? Licensed & insured · free written estimates
Call (855) 606-6122
Local Service Coverage

Request a Free Estimate in Sunrise Manor

Tell us what you need - Mason Remodeling Sunrise Manor responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Text Us
Call Now - 24/7 Dispatch