







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Why Sunrise Manor Homeowners Choose Mr-Glass Construction
We provide independent Mr-Glass construction service in Sunrise Manor: storefront and entry system repair, window replacement, sliding patio door realignment, and frameless glass enclosure installation. What sets our Mr-Glass work apart is focus. We handle these aluminum storefront and entry assemblies regularly, so we know how their frames, glazing and hardware behave under desert heat, and we fix the actual cause instead of selling you a whole new system. We are not affiliated with or authorized by Mr-Glass; we’re an independent provider.
That independence matters in Sunrise Manor. This is an unincorporated township, not a city, so nearly all construction work here runs through Clark County’s building department rather than a municipal one. Most of the housing went up fast during the 1980s – 2000s boom on slab-on-grade with stucco over wood frame. That era of tract construction produces particular failure modes, and Mr-Glass windows and patio doors in these homes show them clearly. Our technicians have up to 22 years of experience reading exactly that kind of wear.
Call (855) 606-6122 to schedule your free estimate. A written price comes before any work starts.
Why Trust Mason Remodeling Sunrise Manor for Your Mr-Glass Construction?

Our technicians work on Mr-Glass assemblies often enough to recognize the difference between a worn roller and a bent track, or between a failed seal and simple condensation. That familiarity comes from repetition, not guesswork.
We source OEM Mr-Glass hardware and weatherstrip when it’s available, because exact fit matters on aluminum storefront and entry systems. When a genuine part is discontinued or priced beyond sense, we use high-quality aftermarket glass and seals that meet the same specification. Either way, you know which route we took and why before we order anything.
Warranty-safe service is standard on our Mr-Glass work. We don’t drill into sound frames, cut corners on glazing, or substitute hardware that stresses the assembly. If your Mr-Glass system still carries manufacturer coverage, our approach is built to preserve it rather than void it by careless modification. And because a written price is delivered before any work starts, you’re never guessing what the repair will cost.
Every crew member is identity-verified, arrives in a clean marked uniform, and shows a photo ID badge at the door. You’ll get the technician’s name and photo before the visit. That’s The Threshold Standard, and it applies to every Mr-Glass job we take on in Sunrise Manor.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Common Mr-Glass Construction Problems We Fix in Sunrise Manor
Sunrise Manor summers routinely top 105°F, UV is intense, and monsoon-season microbursts hit hard. Mr-Glass systems here take a beating that milder climates never deliver. These are the failures we see most:
- Failed dual-pane seals causing permanent fogging. Mr-Glass Series 400 fixed and operable windows and sliding glass patio doors use insulated glass units. When the perimeter seal fails, moisture gets between the lites and can’t escape. The fog is permanent – no amount of cleaning fixes it. Only a replacement insulated glass unit solves it, and the frame usually stays.
- Aluminum frame expansion and sealant cracking at corners. Aluminum moves with heat far more than wood or vinyl. Repeated 100°F+ cycles work the sealant joints at frame corners until they crack. That’s the entry point for dust and monsoon rain. Re-sealing with the right elastomeric product stops the leak before it reaches interior finishes.
- Misaligned rollers and tracks on sliding patio doors. Desert dust settles into bottom tracks, and heat cycles wear the roller assemblies. The door starts to bind, scrape, and stop sealing tightly. Fresh rollers, cleaned or replaced track hardware, and a realignment bring it back to smooth operation.
- Corroded or loose hinge and latch hardware on entry doors. Tempered glass entry and sidelite assemblies carry heavy doors. When hinges corrode or work loose, the door sags, the latch stops catching cleanly, and air leaks around the frame. Replacing the hardware restores the seal and the security of a door that actually latches.
- Cracked lites from thermal stress and impact. A cracked pane in a Mr-Glass window or sidelite is common after a hard temperature swing or a stray hit. The glass gets measured and matched to the existing frame, so you’re not replacing the whole system over one lite.
Because Sunrise Manor is unincorporated, permits for this kind of work go through Clark County’s counter near the Winchester Dondero Cultural Center area, not a city hall. We pull permits and pass inspections where the job requires it, so the work is documented and safe.
Mr-Glass Parts & Our Repair-vs-Replace Approach

Parts get sourced per job. We don’t claim a local warehouse or stocked parts on a truck, because we don’t have one. When you book a Mr-Glass repair, we identify the specific part – roller assembly, hinge set, weatherstrip profile, or insulated glass unit – and order it to match your system. OEM Mr-Glass parts come first when they’re available. Quality aftermarket glass and seals fill in when OEM is discontinued or overpriced.
The repair-versus-replace call is where homeowners get sold things they don’t need. Our rule is simple: if the frame is sound, we repair. Glass and hardware are replaceable without tearing out a good frame. A whole-system replacement only makes sense when the frame itself is bent, corroded through, or failing structurally. We tell you which situation you’re in, plainly, before any work starts.
Call (855) 606-6122 for a free estimate on your Mr-Glass system – we’ll tell you honestly whether it needs a repair or a replacement.
Our Mr-Glass Service Process – Step by Step
- 1
Diagnosis. We inspect the Mr-Glass assembly in person – frame condition, glazing seals, track and roller wear, hardware tightness, and weatherstrip integrity. We identify the root cause, not just the symptom, and explain what we found.
- 2
Written price and repair/replace decision. You get a written price before any work begins, with the OEM-versus-aftermarket parts choice spelled out. No verbal estimates that grow on the final bill.
- 3
Repair or installation. We replace rollers, tracks, hinges, latches, weatherstrip, or glass as needed, or install a new Mr-Glass system. Work is done to preserve the frame and the warranty.
- 4
Test and seal. The door or window gets cycled, latched, and checked for air and water sealing. A sliding door should glide and lock cleanly; a window should sit flush with no draft.
- 5
Written guarantee. Every completed job is covered by a written guarantee with stated terms, including a 365-Day Done Right Promise – if the work isn’t right within a year of completion, we make it right at no cost. A free return visit comes with it if a repair or installation fails.
See the difference
Before
After
Before
After
Before
AfterMr-Glass Products We Service & Install in Sunrise Manor

We work on the full range of Mr-Glass systems you’ll find in Sunrise Manor homes and small commercial buildings. That includes Mr-Glass commercial aluminum storefront systems, the Series 400 fixed and operable windows, sliding glass patio doors, and tempered glass entry and sidelite assemblies. We also install impact window systems, standard window replacements, and frameless glass shower enclosures where the job calls for them.
Because these systems turn up across the township’s 1980s – 2000s stucco-over-wood-frame tract homes and the smaller stock of older block homes, we’ve learned the specific wear each one shows. Sliding doors in particular take the worst of the dust and heat. If yours drags or won’t seal, that’s usually a roller-and-track issue, not a reason to replace the door.
We Also Service These Brands
Mr-Glass is one brand we know well, but it isn’t the only one. Mason Remodeling Sunrise Manor also handles work involving KraftMaid cabinetry, Cambria and Silestone surfaces, and Kohler fixtures, so a glass-and-door project can connect to a larger renovation without handing you off to a stranger. If your Sunrise Manor home has a mix of brands, we can work across them under one written price and one guarantee.
FAQs – Mr-Glass Construction Service in Sunrise Manor
Yes – in most cases the fogged glass can be replaced on its own without touching the frame. Fogging means the insulated glass unit’s perimeter seal has failed, so moisture is trapped between the panes. We measure the unit, order a replacement matched to your existing Mr-Glass frame, and swap the glass. The frame stays. Call (855) 606-6122 for a free estimate on your specific window.
Sticking and air leaks usually come from worn roller assemblies and a bottom track packed with desert dust, made worse by years of heat cycles that dry out the weatherstripping. The door drops slightly, drags, and stops sealing tightly. Replacing the rollers and track hardware, realigning the frame, and renewing the weather seal fixes it without a full door replacement. Call (855) 606-6122 to get yours looked at.
Yes – we install impact-rated glazing that fits Mr-Glass frames, with impact window installation priced from $8,000 – $25,000 depending on scope. Impact glass matters in Sunrise Manor, where monsoon microbursts and wind-driven debris can crack ordinary lites. We confirm the rating and fit for your specific assembly before ordering. Call (855) 606-6122 for a free estimate.
Often, yes – a frameless glass shower enclosure can be added to an existing bathroom if the shower footprint and waterproofing are sound, at $4,500 – $12,000 for the enclosure. If the pan or tile is failing underneath, that changes the scope, and we’ll tell you honestly which situation you’re in. A full bathroom remodel runs $9,000 – $28,000. Call (855) 606-6122 to schedule your free estimate.
No. Mason Remodeling Sunrise Manor is an independent Mr-Glass service provider. We are not affiliated with or authorized by Mr-Glass, and we don’t claim manufacturer authorization. We service and install their systems because we know them well, not because they’ve endorsed us. What we do back is our own work with a written guarantee. Call (855) 606-6122 with questions about your system.
Cost depends on the job, but these are the ranges we work within for the projects this page covers:
| Service | Price Range |
|---|---|
| Window Replacement | $4,500 – $15,000 |
| Impact Window Installation | $8,000 – $25,000 |
| Frameless Glass Shower Enclosures | $4,500 – $12,000 |
| Bathroom Remodel | $9,000 – $28,000 |
Fogged-glass replacement and roller or hardware repairs generally land well below full replacement, which is why we diagnose first. Call (855) 606-6122 for an exact quote on your Mr-Glass system – estimates are free and the price is written before any work starts.
Book Your Mr-Glass Service in Sunrise Manor, NV
Whether it’s fogged glass, a dragging patio door, or a fresh impact-window install, we’ll tell you what’s actually wrong and what it costs before any tool comes out. Independent Mr-Glass specialists in Sunrise Manor, backed by The Threshold Standard and a 365-Day Done Right Promise. Call Mason Remodeling Sunrise Manor at (855) 606-6122 for your free estimate.
Written by the team at Mason Remodeling Sunrise Manor.












