A Mason company - serving Sunrise Manor, NV
A remodeled kitchen with a wood island, painted cabinets and a plaster range hood
Master Halco · Sunrise Manor

Master Halco Kitchen Remodeling in Sunrise Manor, NV

Free Estimate on SiteCalls Answered by a Live Person, 24/7Background-Checked TechniciansA Local Team in Sunrise Manor
A remodeled kitchen with a waterfall island and wood cabinets
An open kitchen and dining area after a remodel
A galley kitchen opened up to the dining room with a new peninsula
A stone counter, tile backsplash and open shelf after a kitchen remodel
New painted shaker cabinets with an organized deep drawer
An open living space after a whole-home remodel
A finished backyard cottage with a small covered porch
A remodeled primary bathroom with a soaking tub and walk-in shower
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate

Master Halco Kitchen Remodeling: The Sunrise Manor Owner’s Guide

If you’ve got a failing Master Halco kitchen component in your Sunrise Manor home, we can install a compatible replacement rather than sell you a whole new kitchen. Most single-item replacements in Sunrise Manor land between $800 and $13,000 depending on the scope, while a full Master Halco-compatible kitchen remodel runs $14,000 to $45,000 installed.

Call (855) 606-6122

Sunrise Manor owners usually find this out the hard way. A cabinet door won’t stay shut because the hinge plate has torn out of particleboard softened by our dry summer air. Or you pull a drawer and it slides crooked because a nylon roller cracked after years of 110-degree July afternoons. Sometimes it’s the water: a slow leak under the sink that’s quietly swelled the toe kick. Whatever the symptom, the pattern is the same. One Master Halco element has failed and you need it matched correctly, priced honestly, and installed by someone who shows up when they say they will.

Key Takeaways

  • Single-part replacements in Sunrise Manor typically run $800 to $6,500 installed; full kitchen remodels run $14,000 to $45,000.
  • Match the part by series stamp or precise measurement, not by photo alone.
  • We write the price before any work starts, on every project.
  • Cabinet hardware and hinge swaps are safe to check yourself; any gas, electrical, or plumbing line behind the wall is not.

Which Master Halco Models This Applies To

Installers leveling a new base cabinet during a kitchen remodel

Master Halco is a heavy hitter in fence and rail supply, but their cabinet and millwork programs are what most Sunrise Manor homeowners are dealing with here: builder-grade and semi-custom cabinet boxes, drawer systems, and hardware that were installed in tract homes across the valley. The first thing you need is the series or model line, and the fastest way to get it is to look inside a cabinet door or underneath a drawer box. Manufacturer labels are usually stapled to the back panel of the box or stamped on the inside face of the door. If the label is gone, measure the cabinet box opening rather than the door itself, note the hinge bore spacing, and photograph the drawer glide from the side.

Here’s the compatibility gotcha that trips up most Sunrise Manor homeowners: Master Halco drawer glides don’t always share mounting patterns with other brands, even when the glide looks nearly identical. A glide with an off-center screw pattern will physically mount but run crooked, and the drawer will bind within weeks. We match on the actual screw pattern and glide length, not on appearance. On the OEM-versus-aftermarket decision, we source OEM or a verified equivalent based on which is more available and which holds up better under Nevada’s dry air and summer heat. Both paths work; what matters is the spec match.

Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence

Signs Your Master Halco Kitchen Remodeling Is Failing

Here’s what a failing Master Halco component actually looks like in a Sunrise Manor kitchen, and what’s going on underneath:

  • Drawer glides that stick or drop. A nylon roller has cracked or the glide track has bent under the load. In our dry air, nylon glides dry out and lose their tolerance faster than in humid climates.
  • Cabinet doors that sag or won’t close flush. A hinge screw has stripped from the particleboard or the hinge has lost its spring tension. The stripped-hole problem is the common one, caused by the wood fibers compressing over years of opening and closing.
  • Soft spots or swelling at the toe kick and under-sink base. Moisture has worked into the particleboard and the fibers are breaking down. This is often a slow supply-line or drain leak that went unnoticed for months.
  • Delaminating laminate or peeling veneer on cabinet faces. The adhesive has dried and released, pulling the surface layer away from the substrate. The dry heat and strong sun exposure through west-facing windows accelerates this.
  • Cracked or loose hinges at the frame. Screws have wallowed out their holes and the hinge plate is no longer seated. Left alone, the door will eventually fall and take part of the box with it.

Two or more of these at once often points to the same root cause: a moisture problem or an aging hardware system. That’s worth noting because replacing the part without fixing the cause means you’ll be back here next year.

Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Replacement Cost & What’s Included

A remodeled hall bathroom with patterned floor tile and painted walls

Installed price ranges for Sunrise Manor, so you can self-qualify before you call. These are line-item figures that include labor, the part, and a written guarantee:

  • Cabinet hardware and hinge replacement (single run): $800 to $3,000.
  • Cabinet installation (full cabinet set): $4,000 to $13,000.
  • Countertop installation: $2,000 to $6,500.
  • Backsplash installation: $800 to $2,500.
  • Kitchen island installation: $3,000 to $10,000.
  • Full Master Halco-compatible kitchen remodel: $14,000 to $45,000.

What drives the range: the number of cabinet boxes involved, whether the countertop has to come off to access the affected run, and whether the failed component is still in production. A discontinued Master Halco glide might cost a bit more to source but saves by avoiding a full cabinet replacement. Our written price is delivered before any work starts; the finalized figure is fixed and does not change once the job begins. Every completed project carries a written guarantee, and if something fails within 365 days of the completion date, we come back at no charge.

DIY or Call Us?

Here’s the honest split. An owner can safely check the label, measure the box opening, and confirm the model line. You can also safely swap standard cabinet hardware with a screwdriver if you’re replacing like-for-like.

Here’s where DIY goes wrong in Sunrise Manor kitchens. Any work that involves the plumbing supply or drain behind the cabinets, or the electrical line feeding under-cabinet lighting or an outlet, needs a trained professional. Water and electricity behind a cabinet wall are not a handyman weekend project. Catching a slow leak on a shutoff valve mid-swap, or mixing a 220-volt line with a renovation, is genuinely dangerous. We also see installed parts fail early when they were bought by appearance rather than spec: a glide that looked right but didn’t fit the mounting pattern and started binding in a month. If you’re not sure, the safest move costs nothing: call us at (855) 606-6122 and we’ll tell you exactly what you’re looking at. Estimates are free.

FAQs

A remodeled staircase with wood treads and a slim metal railing

Ideas for every room in the house

Built-ins, window seats, family rooms and staircases: the changes that make a whole house work better.

Read our remodeling guides
A low-threshold walk-in shower with a bench and grab barA finished basement family room with a media wall and wet barA powder room with botanical wallpaper and a stone sinkA remodeled laundry and mudroom with a bench, cubbies and painted cabinetsA built-in window seat in a bay windowA whole-home remodel with the living, dining and kitchen areas opened up

Explore more remodels

Every project below starts the same way: a free on-site visit and a written price.

Getting started with Mason in Sunrise Manor

Every project starts with a conversation and a written price. Here is how to take the first step.

A project lead measuring a kitchen with the homeowner during a free estimate

Free on-site estimate

A project lead walks the job with you, measures it and hands you a written, line-item price. No obligation.

Book an estimate
A remodeling crew arriving at a home with lumber and tools

Your Sunrise Manor team

A local vetted partner works across Sunrise Manor and the towns around it, to the same written standard as every Mason job.

Areas we serve
A worker laying floor protection and a dust barrier before work starts

Read our written promise

What we promise on every job, written down, with the terms spelled out before any work starts.

Our promise
Need Construction help nationwide? Licensed & insured · free written estimates
Call (855) 606-6122
Local Service Coverage

Request a Free Estimate in Sunrise Manor

Tell us what you need - Mason Remodeling Sunrise Manor responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Text Us
Call Now - 24/7 Dispatch