







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
ES Windows Roofing: The Sunrise Manor Owner’s Guide
Roofing components matched to ES Windows systems are installed by our crews in Sunrise Manor for $400 – $1,800 on a targeted repair, or $8,000 – $20,000 for a full roof replacement once the flashing and underlayment are tied to the window line. We verify the exact part against your ES Windows series before anything is ordered, and we do not leave you guessing with a verbal estimate. Plan a few days for a repair and a week or more for a replacement; this is scheduled work, not an emergency call.
Owners here usually find the problem after a monsoon season. A damp stain spreads across the ceiling near a window head, or the caulk line above a window pulls away and lets grit in. On homes in Sunrise Manor with ES Windows units, the failure almost always traces to the flashing and seal between the window frame and the roof – the detail that ties the two systems together. That junction is where water gets in first.
Key Takeaways
- Repairs tied to an ES Windows roof junction run $400 – $1,800; a full replacement runs $8,000 – $20,000.
- The part that fails most is the flashing and seal at the window head, not the shingles.
- We confirm your ES Windows series before ordering. We’re an independent provider, not affiliated with ES Windows.
- You get a written price and a photo ID badge at the door before work begins.
Which ES Windows Models This Applies To

ES Windows has produced window and door lines in several series over the years, and the roof interface detail changes with each. What matters for your roof is not the glass or the sash – it’s the frame profile at the top of the unit, the nail fin depth, and the head flashing that was specified to sit over it. A single-hung from one series and a slider from another can need different flashing profiles even when the rough opening measures the same. Before we order anything, we read the etched glass label or the frame sticker for the series and model code, and we measure the rough opening and the head reveal.
If the label is gone – common on remodels and on homes that changed hands in Sunrise Manor – we identify the unit by frame profile and fin dimension against known ES Windows specs. That takes a site visit.
On the OEM-versus-aftermarket question: for ES Windows specifically, we match the original flashing profile whenever it’s still produced, because the head detail relies on the fin depth fitting that exact frame. When the OEM part is no longer made, we specify a bend-to-fit flashing in the same gauge aluminum and seal it to the same laps. That’s not a downgrade – it’s a correct fit. We don’t claim to stock parts or carry them on a truck; each piece is matched to your unit and ordered for the job.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your ES Windows Roofing Is Failing
These are the symptoms we see most in Sunrise Manor, and what each one is telling you.
- Water stain on the ceiling below a window head. The head flashing has separated from the frame or the sealant behind it has cracked. Water is tracking down the framing instead of shedding off the roof.
- Caulk line above the window pulling away or chalky. Our desert sun and dry heat break down sealant faster than in wetter climates – often in three to five years here. Once the bead fails, wind-driven rain gets behind it.
- Daylight or a draft at the top corner of the frame. The flashing or the frame seal has opened a gap. This one lets in both water and hot summer air, and it gets worse each season.
- Grit, dust, or fine sand collecting on the sill inside. Wind is pushing fine particles through a failed joint. In Sunrise Manor, that dust is the early warning before you see a stain.
- Lifted or curled shingles running up from the window. The flashing isn’t shedding water correctly and the shingles above it are taking the load. Left alone, this spreads into the deck.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

A targeted repair that re-flashes the ES Windows junction runs $400 – $1,800 in Sunrise Manor. A full roof replacement, where the flashing is tied back into new underlayment and shingles, runs $8,000 – $20,000.
| Scope | Installed price range |
|---|---|
| Flashing repair at window head | $400 – $900 |
| Repair with sealant and shingle reset | $600 – $1,800 |
| Partial roof section, tied to window line | $2,500 – $6,000 |
| Full roof replacement (flashing integrated) | $8,000 – $20,000 |
The range is driven by roof pitch and access, how many windows sit on the affected slope, and whether the deck under the flashing is sound. We use specification-grade roofing materials from GAF, CertainTeed, and Owens Corning, and we give you a written, line-item price before a tool comes out – parts and labor broken out, no surprise invoice at the end. Every install is covered by our written guarantee with terms stated plainly, including the free return visit if something fails.
DIY or Call Us?
Roof work at height is the part we’d steer you away from doing yourself. A single slip on a pitched roof causes serious injury, and re-flashing a window head means working at the edge, on a ladder, often near the gutter line. That’s a job for a trained professional with fall protection, not a weekend ladder project.
What you can safely check from the ground: look for lifted shingles near the window, a cracked or chalky caulk bead, and stains on the interior ceiling. Note where you see them. Beyond that, leave the flashing and shingle work to a crew. If water is already inside, don’t patch it blind – the source is usually behind the finish. Give us a call and we’ll trace it and price the fix in writing. Call (855) 606-6122 for a free estimate.
FAQs

The flashing and seal we install, done correctly, typically hold 15 to 20 years; sealant at the joint usually needs refreshing sooner because of our heat and UV. The shingles on top depend on the material, but the window junction is the piece that fails first in this climate.
Often yes. If the flashing and seal are the only failure and the deck is sound, a targeted repair at $400 – $1,800 fixes it. A full replacement only makes sense when the underlayment or deck is compromised or the roof is near end of life. We’ll tell you which one you actually need. Call (855) 606-6122 for an exact quote – estimates are free.
A flashing repair is typically a scheduled half-day to full-day job; a full replacement takes several days depending on square footage and weather. This is planned work, so we schedule it rather than promise same-day service. You’ll know the timeline in your written price.
We identify your ES Windows series by label or by frame profile and fin dimension, then order the matching flashing profile – OEM where still produced, or a bend-to-fit equivalent in the same gauge when it isn’t. We don’t stock parts; each is matched to your unit. We’re an independent provider, not affiliated with ES Windows.
We also work with KraftMaid, Cambria, and Silestone on the interior side, so a roof repair that turns into a whole-room refresh stays in capable hands.
If you’re seeing a stain, a failed bead, or daylight at a window head, don’t wait for the next storm to make it worse. Call (855) 606-6122 for a free estimate – a live person answers around the clock, and you’ll get a written price before any work begins. Every technician is background-checked and identity-verified under The Threshold Standard, and you’ll know their name and photo before they arrive.
Written by the team at Mason Remodeling Sunrise Manor, serving Sunrise Manor and nearby areas.












