







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
ES Windows Driveway & Pavers: The Sunrise Manor Owner’s Guide
We install ES Windows-compatible paver driveways, walkways, and patio surfaces in Sunrise Manor, and a full paver driveway typically lands between $7,000 and $18,000 installed, with most single-driveway jobs finished in two to four days once materials are on site. ES Windows products are built to spec, so the part that fails first is almost never the paver itself – it’s the bedding layer, the edge restraint, or the joint sand underneath it. Sunrise Manor owners usually spot the problem the same way: a stretch of pavers that dips after a monsoon, sand washing out into the street, or a paver edge that’s started to tip where the driveway meets the garage apron. Call (855) 606-6122 for a free, written estimate.
Key Takeaways
- Paver driveway installation in Sunrise Manor: $7,000 – $18,000 installed, including base prep, edge restraint, and polymeric joint sand.
- Paver patios: $3,500 – $11,000. Driveway sealing alone: $250 – $700.
- Most ES Windows paver failures trace to base compaction and bedding sand, not the paver surface.
- We are an independent service provider and are not affiliated with ES Windows.
- Every job gets a written price before work starts and our 365-Day Done Right Promise.
Which ES Windows Models This Applies To

ES Windows is a Florida-rooted manufacturer, and its paver and hardscape lines show up in Sunrise Manor mainly through residential builds and remodels where an owner or prior installer specified ES Windows products. The pavers themselves are concrete interlocking units, typically 60mm or 80mm thick for driveway traffic and 40mm to 60mm for patios and walkways. Thickness matters more than most homeowners realize: 60mm pavers can carry a passenger vehicle, but a 40mm patio paver used on a driveway will crack at the corners within a couple of seasons under a truck or a heavy SUV in Nevada heat.
To identify what you have, pull a loose paver at an edge or in a corner and measure its thickness and face dimensions with a tape. Look for a stamp or a series name on the underside. ES Windows runs several paver profiles, and the sizing between series is not always interchangeable – a 60mm unit from one series may not match the chamfer or the face dimensions of another, which matters when you’re trying to patch a section without the seam showing. Send us a photo with a tape measure across the face and we can tell you what you’re working with.
On the OEM-versus-aftermarket question: for ES Windows pavers, we generally recommend sourcing a true match for any visible repair area, because a mismatched face profile reads as a patch from the street. For a full driveway rebuild where the whole surface is being replaced, a specification-grade equivalent from Belgard, Unilock, or Techo-Bloc is a legitimate option and often gives you more color and profile choices. The base and bedding are where the durability lives; the paver is the wearing surface. We don’t stock parts and we don’t carry pavers on a truck – we source the matched product once we’ve measured your site.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your ES Windows Driveway & Pavers Is Failing
Pavers fail from underneath. The surface is the last thing to show it. Here’s what to watch for in Sunrise Manor:
- Dips and birdbaths after rain. Water pooling in the middle of the driveway means the base wasn’t compacted in lifts or the bedding sand has migrated. Once a low spot forms, water sits and the base softens further, and the dip gets deeper each monsoon.
- Sand washing out at the joints and edges. Joint sand is the first line of defense, and in Sunrise Manor’s dry stretches followed by hard rain, standard sand erodes fast. If you’re sweeping sand into the joints twice a year, the joints are failing – polymeric sand is the fix.
- Edge tipping or spreading at the driveway apron. The edge restraint is a concrete or plastic curb that locks the field of pavers from spreading outward. If it’s missing or shallow, the outer row tips under tire load, and the whole field starts to walk.
- Weeds pushing up through joints. This usually points to missing or degraded joint sand and a base that’s holding moisture. It’s a symptom of water getting where it shouldn’t, not just a cosmetic nuisance.
- Cracked or chipped paver corners. Corner breaks on their own are often a thickness or load problem – an undersized paver under a heavy vehicle. Clustered corner breaks across several pavers mean the bedding layer is uneven and the pavers are rocking against each other.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

Here’s what paver work runs in Sunrise Manor, so you can self-qualify before you call:
| Job | Installed price range |
|---|---|
| Paver driveway installation (full) | $7,000 – $18,000 |
| Paver patio installation | $3,500 – $11,000 |
| Driveway replacement (existing surface removed) | $5,000 – $14,000 |
| Driveway sealing | $250 – $700 |
What pushes you toward the top of a range: square footage, thickness (80mm costs more than 60mm), base excavation depth, and whether the existing surface has to come out first. Those prices include excavation and base prep, compacted base, bedding sand, the pavers, edge restraint, polymeric joint sand, and cleanup. We deliver a written, line-item price before any work begins, so parts and labor are broken out, not bundled into one number that grows on the final bill. Every paver job is covered by our 365-Day Done Right Promise – if something’s not right within 365 days of the completion date, we make it right at no cost to you.
DIY or Call Us?
Some of this you can check safely. Walk the driveway after a hose run and mark the low spots with chalk. Sweep a joint and see how deep the sand goes. Look at the edge restraint where pavers meet the garage apron or the street to see if it’s intact and deep enough. That diagnostic work is worth doing before you call anyone, and it makes the estimate faster.
What we’d steer you away from: lifting and resetting a section of driveway pavers yourself, especially if you’re planning to re-bed them. A paver driveway is a system – base, bedding, pavers, edge, joint sand – and if you reset the surface pavers without re-compacting the base underneath, the dip comes back in one rainy season. It also tends to look worse than it did, because you can’t get the field flat and locked without the right plate compactor and screed. And once pavers are lifted and re-bedded wrong, patching it costs more than doing it correctly the first time. If the surface is uneven or the edges are moving, call (855) 606-6122 for a free estimate – we’ll tell you honestly whether it needs a full rebuild or a targeted repair.
FAQs

A properly installed paver driveway should last 25 to 30 years, and the paver itself is the part that lasts longest in that number. The base, joint sand, and edge restraint are what age first in a place like Sunrise Manor, where summer ground temperatures and monsoon rain cycles work on the bedding layer. Re-sanding with polymeric sand every few years is the single best thing you can do to extend the life of the system. Call (855) 606-6122 for an exact quote – estimates are free.
Sometimes, yes. A localized dip or a handful of tipped edge pavers can often be lifted, re-bedded, and reset without touching the rest of the field, and that’s a fraction of a full replacement. If the base under a large area is saturated or the edge restraint is gone, a section rebuild is the honest answer. We’ll tell you which one you’re looking at during the estimate. Call (855) 606-6122 to book it.
Most residential paver driveways in Sunrise Manor take two to four working days once materials are delivered – excavation and base prep on day one, compaction and bedding on day two, pavers and edge restraint on day three, and polymeric sand and cleanup on the last day. Larger driveways or full replacements with existing surface removal push toward the longer end. Call (855) 606-6122 for a written schedule with your quote.
We match by the physical part, not by a guess – you send us a tape measurement across the paver face and thickness, or pull one loose paver and photograph the underside, and we source against that. We don’t stock pavers and we don’t carry them on trucks; we order the matched product for your job once we’ve measured the site. Where an exact ES Windows match isn’t available, we’ll tell you up front and show you the specification-grade equivalents from Belgard, Unilock, or Techo-Bloc. Call (855) 606-6122 to get the match started.
We also install ES Windows window and door products, and we work with KraftMaid cabinetry, Cambria, and Silestone surfaces on the remodeling side, so if your project crosses over, one written price can cover both.
Ready to price it? Call Mason Remodeling Sunrise Manor at (855) 606-6122 for a free estimate. A live person answers every call, every day. Every technician is background-checked and identity-verified through The Threshold Standard, and you’ll get their name and photo before the visit.
Written by the team at Mason Remodeling Sunrise Manor, serving Sunrise Manor and nearby areas.












