







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Delta Home Additions & ADU: The Sunrise Manor Owner’s Guide
We build and finish Delta-compatible home additions and ADUs in Sunrise Manor, with installed projects typically landing between $45,000 and $130,000. A single-room addition on an existing slab usually falls at the low end of that band, while a full detached ADU climbs toward the top. The failure usually announces itself before anyone cuts a board: a hairline crack running up the joint between the new wall and the original house, a door at the end of the addition that starts catching its strike plate every summer, or a note from the appraiser that the ADU’s electrical panel is a subpanel fed off the main house with no separate meter.
Which Delta Models This Applies To

Delta’s residential framing and enclosure lines show up across a specific set of product families, and matching the right component to the right family is where most Sunrise Manor owners get stuck. The first move is to read the plant or model designation stamped on the faulting member or on the label inside the enclosure unit. If that label is gone, the rating plate on the main panel and the weatherstrip profile on the exterior doors will narrow it down fast. The second move is to measure the existing opening at three points top, middle and bottom, because square is a claim the tape settles, not a feeling.
Then comes the OEM-versus-aftermarket call. For Delta components, the OEM replacement wins when the enclosure geometry is nonstandard or the wall assembly has been modified by a previous contractor. Quality aftermarket equivalents make sense on standard openings where the part is a wear item with a known duty cycle. We’re an independent service provider and not affiliated with Delta, so our job is matching the part to the model you actually have, not steering you toward whatever we keep in stock. We don’t, by the way. No parts sit on a truck, and none sit in a warehouse with our name on it.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Delta Home Additions & ADU Is Failing
Five symptoms we see on Delta units around Sunrise Manor, and what each one usually means underneath:
- A vertical crack where the addition meets the original wall. This is usually differential settlement, not a cosmetic defect. The new footing and the old one are moving at different rates, and the crack is telling you the tie-in was never detailed to accommodate it.
- Doors that stick in July and swing free in January. Thermal expansion in Sunrise Manor is real, but a door that binds every summer points to a header or jamb that wasn’t shimmed to spec. The opening is racking with the temperature.
- A roof-edge stain over the addition after a monsoon cell. On a Delta low-slope section, this is more often a failed termination bar or a lifted edge cleat than a bad membrane. The water is entering at the perimeter, not the field.
- Slab-edge soil pulling away from the addition. Our clay-heavy soil shrinks hard in dry months. If the backfill wasn’t compacted in lifts, that gap opens and keeps opening.
- An ADU subpanel that trips whenever the mini-split kicks on. This is a load calculation or feeder-size problem, not a failing breaker. Adding a bigger breaker makes it worse, not better.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

Most of what we quote in Sunrise Manor is new work rather than a straight swap, so the numbers below reflect installed scopes rather than a parts bill plus labor. Here’s what the ranges look like:
- Home addition, single room: $45,000 – $130,000. Square footage, whether the existing slab carries the load, and how far the mechanical runs have to travel drive the spread.
- ADU construction: $90,000 – $220,000. Detached units sit at the top. Attached or garage-conversion units sit lower depending on the site work.
- Garage conversion: $30,000 – $80,000. The egress window, upgraded floor, and separate HVAC are the three line items that swing most.
Every quote we hand over is a written price before any work starts, with line items you can read. No surprise invoices when the job wraps. The completed work carries the 365-Day Done Right Promise, which means if something isn’t right within a year of completion, we make it right at no cost to you.
DIY or Call Us?
Here’s the honest split. You can safely read the label on your Delta equipment, measure the opening at three points, photograph the crack pattern, and check whether the addition’s subpanel has its own feeder. That information helps us quote accurately and helps you understand what you’re looking at. Where DIY goes wrong is the moment anyone reaches for the framing, the roof edge, or the electrical – and it goes wrong in ways that show up months later, not that afternoon. Cutting into a load-bearing header to “settle” a sticking door, re-sealing a roof termination without knowing the correct lap, or rerouting a feeder wire are all jobs where a mistake is expensive and sometimes dangerous. Call us at (855) 606-6122 for a free estimate and we’ll tell you plainly what the fix requires.
FAQs

The structural framing should last fifty years or more. The wear items are shorter: the roof termination and flashing detail need inspection every five to seven years in our climate, and any door weatherstripping or sealant at the tie-in will need replacement every seven to ten. The single biggest lifespan killer we see is deferred roof-perimeter maintenance, not the frame.
Often yes. A cracked tie-in can be underpinned and re-strapped, a sticking door opening can be re-shimmed and rehung without replacing the header, and a roof termination can be rebuilt without tearing off the membrane. The decision comes down to whether the underlying cause is structural movement or just a wear item. Call (855) 606-6122 and we’ll tell you which one you’re looking at.
A single-room addition typically runs eight to fourteen weeks from permit to final inspection. An ADU runs four to six months depending on whether it’s detached and how much site work is involved. A garage conversion usually lands in six to ten weeks. The permitting timeline in Clark County is part of that estimate, and we’ll give you the sequence in writing before we start.
We identify your Delta model from the label or the panel rating plate, then order the correct component from the manufacturer or a verified aftermarket supplier whose spec sheet we’ve checked against yours. We don’t carry parts in stock, so there’s no pressure to make what’s on hand fit. You get a written price for the exact part your unit needs. We also work with KraftMaid cabinetry, Cambria and Silestone surfaces when a project involves finishes alongside the structural work.
If you’ve got a Delta addition or ADU issue in Sunrise Manor and you want a plain answer about what it needs, call (855) 606-6122 for a free estimate. We’ll tell you the range before anyone picks up a tool, and you’ll know exactly who’s coming to your door, by name and photo, through The Threshold Standard.
Written by the team at Mason Remodeling Sunrise Manor, serving Sunrise Manor and nearby areas.












