







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
CWS Kitchen Remodeling: The Sunrise Manor Owner’s Guide
We install CWS-compatible kitchen remodeling in Sunrise Manor, and a full kitchen typically runs $14,000 – $45,000 installed, with small kitchens at $9,000 – $20,000. CWS cabinetry uses its own box dimensions and hinge-bore patterns, so the parts you match have to fit that system, not a generic big-box spec. Most Sunrise Manor owners find out something is wrong the same way: a cabinet door that won’t sit flush, a drawer that drags on one corner, or a hinge that has started to sag after a summer of 110-degree afternoons. When that happens, the fix is usually a matched part and an hour of careful adjustment, not a new kitchen.
Which CWS Models This Applies To

CWS has built kitchen cabinetry across several lines over the years, and the parts are not interchangeable between them. The fastest way to identify yours is to open a base cabinet door and look for the manufacturer label on the inside of the door or the back panel of the box. That label gives you the series, the box depth, and often the hardware family. If the label is gone, measure the door overlay (the amount the door covers the cabinet face frame) and the distance between hinge screw holes. Those two numbers narrow it to the right replacement faster than any photo will.
For CWS specifically, the decision between OEM and quality aftermarket comes down to two things: hinge bore size and drawer glide mounting pattern. OEM parts match exactly, which matters on integrated soft-close hinges and on full-extension glides that ride a proprietary clip. Aftermarket equivalents from brands like Blum or Hettich are excellent and often smoother than the original, but they require re-drilling, and on a finished cabinet face a misplaced hole is permanent. If your CWS boxes are still square and the faces are intact, OEM-fit parts keep the install clean. If the cabinet is older and the original hardware is discontinued, an aftermarket glide with an adapter plate is the honest answer, and we’ll tell you which route fits your kitchen before any work starts.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your CWS Kitchen Remodeling Is Failing
- A cabinet door that won’t stay closed, or pops open on its own. The spring or cam inside the hinge has worn, and it will get worse as the door weight pulls on the loose screw. Replacing the hinge pair fixes it in most cases.
- Soft-close that has gone stiff or slams. The damping piston has lost its oil seal. In Sunrise Manor’s dry heat, this happens faster than the manufacturer’s rating suggests because the piston dries out over repeated summer cycles.
- A drawer that drags or jumps the track. Either the glide clip has snapped or the track has collected grit. A snapped clip is a small, cheap part and does not mean the whole glide is gone.
- Sagging hinges on upper cabinets. Heavy plates and stacked dishes load uppers more than most people realize. Sag usually shows as a gap at the top corner of the door, not the bottom.
- Loose or stripped hinge screws. The screw hole in the cabinet frame has wallowed out from years of door swing. A hardwood insert or a slightly larger screw brings it back to solid, but only if the frame isn’t cracked.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

In Sunrise Manor, a cabinet installation with new boxes and hardware runs $4,000 – $13,000, and countertop installation runs $2,000 – $6,500. If your issue is hardware only, a hinge or glide swap on a handful of doors is a small job; we price it as a line item and quote it in writing before we touch anything. If the CWS boxes themselves are failing (delamination, water damage near the sink, or a frame that has gone out of square), that’s when the kitchen remodel range applies: $14,000 – $45,000 for a full kitchen, or $9,000 – $20,000 for a smaller one. A backsplash touch-up runs $800 – $2,500 and a kitchen island adds $3,000 – $10,000 if the layout is part of the conversation.
What drives the range: the number of cabinets, whether the countertop has to come off to reach the boxes, whether the sink or dishwasher plumbing gets disturbed, and whether the layout changes. Countertop material matters too. Quartz and natural stone sit at the top of the range; laminate sits at the bottom. Every quote is written and delivered before any work starts, so the figure you approve is the figure on the invoice. The 365-Day Done Right Promise backs the installation for a full year from the completion date: if something we installed fails within that window, we make it right at no cost.
DIY or Call Us?
Some of this you can check safely. Open and close every door and drawer and note which ones stick, sag, or slam. Look at the hinge screws for stripped holes. Measure your door overlay and cabinet box depth. That information makes a call faster and cheaper because we know what parts to bring.
Where DIY goes wrong: swapping a soft-close hinge on a CWS door requires matching the bore and the overlay exactly, and a wrong bore means a hole you can’t undo. Glide replacements need the track and clip to line up, or the drawer will wander and chew the cabinet side. And if your kitchen has any electrical components you’re touching, like under-cabinet lighting or a dishwasher disconnect, that is not a homeowner job. Call us. Our technicians have up to 22 years of experience, and they’ll tell you honestly whether you need a part or a repair.
FAQs

How long do CWS cabinet hinges and glides last in Sunrise Manor? Most CWS soft-close hinges last 8 to 12 years indoors, but in Sunrise Manor’s dry heat the damping piston often fails first, closer to 6 or 8 years on cabinets near a window or under a skylight. The hinge still works when the soft-close goes; it just loses the damped action.
Can the part be repaired instead of replaced? Usually yes for glides and hinges. A snapped glide clip or a stripped screw hole is a small, inexpensive fix if the surrounding track and frame are sound. Replace the whole glide or hinge only if the track is bent, the spring is broken, or the cabinet frame has cracked. Call (855) 606-6122 for a free estimate and we’ll tell you which it is.
How long does a hinge or glide swap take? A single hinge pair or drawer glide is typically under an hour. A full set across a kitchen is most of a day, depending on how many doors and drawers are involved and whether adjustments cascade. We’ll give you a written time estimate with the price.
How do you source the right CWS part? We match by label series and by measurement, and we confirm the overlay and bore before ordering. We don’t carry parts on a truck and we don’t stock CWS parts locally; we order the matched part and schedule the install. That’s why we ask for your cabinet measurements up front.
If your CWS kitchen in Sunrise Manor has a failing hinge, glide, or box, call (855) 606-6122 for a free estimate. We’re an independent service provider and not affiliated with CWS, and we also work with KraftMaid, Cambria, and Silestone on Sunrise Manor kitchen remodels. A live person answers every call, and every crew member is background-checked and introduced to you by name and photo before arrival. You’ll get a written price before any work starts, a 365-Day Done Right Promise on the work, and a free return visit if a repair or installation fails.
Written by the team at Mason Remodeling Sunrise Manor, serving Sunrise Manor and nearby areas.












