







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Barrette Kitchen Remodeling: The Sunrise Manor Owner’s Guide
Kitchen remodeling in Sunrise Manor typically costs $14,000 to $45,000 installed, and we work with Barrette cabinetry, doors, and millwork components as part of a full kitchen build or a targeted replacement. A small kitchen remodel lands between $9,000 and $20,000. If you already own Barrette product and a component has failed, cabinet installation on its own runs $4,000 to $13,000, and we write the price down before any tool comes out of the case.
Owners in Sunrise Manor usually find the problem the same way. A cabinet door won’t sit flush no matter how many times you adjust the hinge. The drawer glide grinds halfway out. A door face has swelled along the bottom edge after a summer of monsoon humidity swings. Barrette hardware and cabinet components are good product, but Las Vegas Valley heat cycling and dry-then-damp seasons work on wood and metal over time. The part you’re hunting for exists, and matching it correctly matters more than most people expect.
Key Takeaways
- Typical Sunrise Manor kitchen remodel: $14,000 to $45,000 installed.
- Barrette parts are matched by series, door thickness, and hinge bore pattern, not by looks alone.
- We supply parts through specification-grade cabinetry partners, not from a stocked truck.
- A written price comes before any work starts, and the 365-Day Done Right Promise covers the installation for a full year from completion.
Mason Remodeling Sunrise Manor is an independent service provider and is not affiliated with Barrette. When you need the work done, that independence means we source the right part for your model instead of forcing whatever happens to be on hand.
Which Barrette Models This Applies To

Barrette manufactures across several product lines, and the part that fits one series will not fit another. The first thing we do on any Sunrise Manor call is identify what you actually have. That means finding the label.
Look inside the cabinet box, usually on the back of a door or the interior side wall, for a manufacturer sticker. It should carry a series or model designation and often a date code. Photograph it before anything else. If the label is gone, we measure instead: door thickness (Barrette doors commonly run three-quarter inch, with some profiles at five-eighths), hinge cup bore diameter (typically 35mm on European-style concealed hinges), bore center-to-edge distance, and drawer glide mounting hole spacing.
Those measurements are where compatibility gets tricky. A 35mm cup bore is standard, but the overlay – how much of the cabinet frame the door covers – varies by hinge model and determines whether a replacement hinge will close cleanly. Glide mounting patterns also differ between side-mount and undermount systems, and you can’t tell them apart from the drawer face. Get the pattern wrong and the new glide won’t seat.
The OEM question is real. Factory Barrette parts guarantee a match, but lead times can stretch. A specification-grade aftermarket hinge or glide from a reputable maker often performs as well or better, costs less, and installs the same day. We’ll tell you honestly which route makes sense for your door and drawer, and we’ll explain the trade-off before you decide. The same sourcing approach applies to KraftMaid, Cambria, and Silestone components if your kitchen mixes brands.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Barrette Kitchen Remodeling Is Failing
These are the failures we see most in Sunrise Manor kitchens. Each has a specific cause, and knowing the cause tells you whether a part swap will fix it.
- Doors that drift out of alignment. Worn hinge cups or stripped mounting screws in the cabinet frame. Once the screw holes enlarge, the hinge can’t hold adjustment and the door sags at the latch side.
- Drawers that grind or stick halfway. Failing roller bearings or a bent glide rail. In our climate, dust accumulates in the glide track faster than most people expect, and grit wears the rollers down.
- Swollen or delaminated door edges. Moisture intrusion along the bottom edge, usually from a nearby sink or dishwasher. Sunrise Manor’s summer humidity swings push particleboard and MDF cores to swell, and once they do, the door won’t sit flat in the frame.
- Hinges that squeak or snap under load. Metal fatigue in the hinge spring or arm, often on the heaviest doors. A door that suddenly won’t stay closed usually points to a hinge that’s near failure, not a misalignment.
- Soft-close mechanisms that stopped damping. The hydraulic piston inside the hinge or glide has worn out. This one is purely a part replacement – the cabinet itself is fine.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

Here’s what Sunrise Manor homeowners actually pay for the work this page covers. These are installed prices, parts and labor included, so you can self-qualify before you call.
| Work | Installed price range |
|---|---|
| Full kitchen remodel | $14,000 – $45,000 |
| Small kitchen remodel | $9,000 – $20,000 |
| Cabinet installation | $4,000 – $13,000 |
| Countertop installation | $2,000 – $6,500 |
| Backsplash installation | $800 – $2,500 |
| Kitchen island installation | $3,000 – $10,000 |
What drives the range: the number of doors and drawers involved, whether the cabinet frame needs repair or just new hardware, door style and material, and whether we’re matching a discontinued Barrette series. Parts and labor are broken out separately on the written quote, never bundled into one vague number. A single hinge or glide swap is at the bottom of the range. A full cabinet installation on a mid-size Sunrise Manor kitchen runs toward the middle or top. The 365-Day Done Right Promise covers the installation for 365 days from the completion date – if it’s not right, we come back at no cost to you.
DIY or Call Us?
Some of this you can check safely yourself. Open and close every door and drawer and note where the catch or grind happens. Photograph the manufacturer label inside the cabinet. Measure door thickness and hinge cup diameter with a ruler. Adjust a hinge screw a quarter turn to see if alignment improves. That tells you a lot.
Where DIY goes wrong: cabinet doors are heavier than they look, and a door that slips off a partially unscrewed hinge can crack a countertop edge or take a finger with it. Swapping a hinge or glide is usually a two-person job if you want it done without damage, and getting the overlay right on the first try takes experience. If the cabinet frame itself has stripped screw holes or water damage, the fix is structural, not a part swap.
Call (855) 606-6122 and we’ll talk through what you’re seeing. Honest answer first, then a free estimate if you want us to handle it.
FAQs

Hinges and glides typically last 10 to 15 years under normal use, but Sunrise Manor’s heat and dry-to-damp swings push hardware toward the shorter end. Wood components that stay dry last decades; any door or drawer face that takes on moisture can fail in two or three seasons. Call (855) 606-6122 for an exact quote on replacement – estimates are free.
Sometimes. A hinge that’s out of adjustment can often be tuned rather than swapped, and a squeak usually responds to a hinge-arm adjustment. A stripped screw hole in the cabinet frame can be repaired with a hardwood plug and re-drilled. But a snapped hinge spring, a worn glide piston, or a swollen door edge is a replacement, not a repair. We’ll tell you which one you’re looking at.
A single hinge or glide replacement is typically a same-visit job, often under an hour. A full set of doors or drawers runs longer, and a cabinet installation on a Sunrise Manor kitchen takes a day or more depending on scope. We give you the timeline in writing with the price before anything starts.
We match by series, measurements, and mounting pattern rather than by guesswork, and we source through specification-grade cabinetry partners in our network. That means we can often find an OEM-equivalent that fits your exact door and drawer without the wait of a factory order. We don’t carry parts on a truck – every part is sourced to your kitchen, verified against your measurements before installation.
Call Mason Remodeling Sunrise Manor at (855) 606-6122 for a free estimate. Every crew member is background-checked, identity-verified, and introduced by name and photo before the visit, with a photo ID badge at the door. You get a written price before any work starts, and a live person answers the phone around the clock. If you’re in Sunrise Manor and a Barrette kitchen component has failed, we’ll help you figure out exactly what you need.
Written by the team at Mason Remodeling Sunrise Manor, serving Sunrise Manor and nearby areas.












