A Mason company - serving Sunrise Manor, NV
A new rear addition with a vaulted beamed ceiling and tall windows
Barrette · Sunrise Manor

Barrette Home Additions & ADU in Sunrise Manor, NV

Free Estimate on SiteCalls Answered by a Live Person, 24/7Background-Checked TechniciansA Local Team in Sunrise Manor
A single-story rear room addition with tall windows and a new patio
A second-story addition that matches the existing roofline
A walk-in shower with large-format tile and a built-in niche
A remodeled family room with new windows and a window seat
A stone counter, tile backsplash and open shelf after a kitchen remodel
A remodeled hall bathroom with subway tile and a floating vanity
A remodeled primary suite with built-in wardrobes and a window seat
New painted shaker cabinets with an organized deep drawer
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate

Barrette Home Additions & ADU: The Sunrise Manor Owner’s Guide

Home additions and ADU work in Sunrise Manor typically runs $45,000 – $130,000 for an addition and $90,000 – $220,000 for a detached or attached accessory dwelling unit, with Barrette-specified framing, glazing, and trim lines installed by our crews. Mason Remodeling Sunrise Manor is an independent service provider and is not affiliated with Barrette. We work with Barrette-compatible systems but source and install as a general contractor, not as a Barrette dealer.

Call (855) 606-6122

Homeowners in Sunrise Manor usually discover a Barrette product failure the same way: a hairline crack spreading along a glazed panel, a door or window slab that no longer seats, or a header trim piece that has started pulling away from the wall plate. That’s the third or fourth season of thermal cycling catching up. Sunrise Manor sits in one of the harshest swing zones in the valley – 40-degree days in January and 110-degree afternoons in July – and Barrette units installed without proper drainage detailing at the sill tend to telegraph the problem within the first two summers. When the fascia starts waving, the glazing starts fogging, or a sliding panel drags on its track, the part is usually at the end of its service life, not mid-failure.

Which Barrette Models This Applies To

A finished backyard cottage with a small covered porch

Barrette’s residential line covers a wide range of door, window, and glazing assemblies, and the part that fits a 2018 build in Sunrise Manor will not necessarily fit a 2014 model with a shallower frame depth. The model and series code is stamped on the frame plate, usually inside the jamb reveal or just above the sill on a sliding unit. If the label is gone, measure the rough opening and the frame face width – Barrette’s standard rough-opening callouts are published in their installation guides, and a 1/2-inch difference in the frame face is enough to send the wrong extrusion home.

For Sunrise Manor, the compatibility gotcha is the stucco flange configuration: Barrette’s western line commonly ships with a nail-fin flange sized for stucco or hard-coat assemblies, and the flange depth must match the substrate thickness at the header. Mismatch here is the number one cause of the water intrusion we see on additions in the eastern valley. OEM Barrette replacement parts carry the exact correct flange and sill pan geometry; quality aftermarket equivalents exist for glazing and hardware, but the structural frame members should stay OEM whenever the original rough opening is being reused.

Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence

Signs Your Barrette Home Additions & ADU Is Failing

  • Fogging or condensation between glazing panes. The seal has failed and moisture is inside the unit. Barrette’s dual-pane assemblies should stay clear for 15 to 20 years in Vegas; fogging before year 10 usually means a defective seal at the spacer.
  • Sliding panel drags or jumps the track. Rollers or the track itself have worn, and the alignment has shifted. In Sunrise Manor, dust and fine desert grit accelerate roller wear by roughly 30% compared to cooler, cleaner climates.
  • Fascia or header trim pulling away. Fasteners have backed out of the substrate, which almost always traces to thermal expansion stress. If the gap is more than 1/8 inch, the trim is compromised.
  • Water stains inside the frame at the sill. The sill pan or flange detail has failed and water is entering. This is the failure that causes the most damage to an addition or ADU wall assembly if it goes unaddressed.
  • Door or window no longer seats in the frame. Either the frame has racked (a structural problem) or the slab has warped (a part problem). The distinction matters before you order anything.
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Replacement Cost & What’s Included

Footing forms with tied rebar for a home addition

For a Sunrise Manor Barrette unit replacement within a home addition or ADU, plan on the following installed ranges:

  • Full addition (Barrette glazing specified): $45,000 – $130,000
  • ADU construction (Barrette-specified units): $90,000 – $220,000
  • Garage conversion with new Barrette glazing: $30,000 – $80,000
  • Individual Barrette unit replacement (framed opening): typically $800 – $3,500 per unit, varies by size and glazing package

The range is driven by opening size, glazing package (dual vs triple pane, low-E coating), whether the rough opening can be reused, and whether stucco or hard-coat repair is needed after removal. Every Mason Remodeling Sunrise Manor project comes with a written price before work begins, and every installation is covered by our 365-Day Done Right Promise. If a repair or installation fails within a year of completion, we come back at no charge.

DIY or Call Us?

You can safely check a few things yourself. Inspect the frame label for the model code. Measure the rough opening. Test whether a door or window seats in the frame by watching for daylight at the corners. Those checks give us the information to quote the right part before we arrive.

What you shouldn’t attempt on your own is removing or reinstalling a Barrette unit in a load-bearing addition wall. This work involves header support, flashing integration, and stucco tie-in – a mistake there lets water into the wall cavity and can compromise the structural opening. The failure doesn’t show up for a season, and by then the repair is in the thousands. Call Mason Remodeling Sunrise Manor at (855) 606-6122 with your model code and opening measurements and we’ll price the replacement honestly before anyone touches the wall.

FAQs

A room opened to the studs with new wiring and plumbing

Ideas for every room in the house

Built-ins, window seats, family rooms and staircases: the changes that make a whole house work better.

Read our remodeling guides
A small remodeled galley kitchen with cabinets to the ceilingA low-threshold walk-in shower with a bench and grab barA finished basement family room with a media wall and wet barA walk-in pantry with wood shelvingA wood double vanity with two mirrors after a bathroom remodelAn open living space after a whole-home remodel

Explore more remodels

Every project below starts the same way: a free on-site visit and a written price.

Getting started with Mason in Sunrise Manor

Every project starts with a conversation and a written price. Here is how to take the first step.

A project lead measuring a kitchen with the homeowner during a free estimate

Free on-site estimate

A project lead walks the job with you, measures it and hands you a written, line-item price. No obligation.

Book an estimate
A remodeling crew arriving at a home with lumber and tools

Your Sunrise Manor team

A local vetted partner works across Sunrise Manor and the towns around it, to the same written standard as every Mason job.

Areas we serve
A worker laying floor protection and a dust barrier before work starts

Read our written promise

What we promise on every job, written down, with the terms spelled out before any work starts.

Our promise
Need Construction help nationwide? Licensed & insured · free written estimates
Call (855) 606-6122
Local Service Coverage

Request a Free Estimate in Sunrise Manor

Tell us what you need - Mason Remodeling Sunrise Manor responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Text Us
Call Now - 24/7 Dispatch