A Mason company - serving Sunrise Manor, NV
An open living room and dining area after a whole-home remodel
Ameristar · Sunrise Manor

Ameristar Construction Service in Sunrise Manor, NV

Free Estimate on SiteCalls Answered by a Live Person, 24/7Background-Checked TechniciansA Local Team in Sunrise Manor
A remodeled staircase with wood treads and a slim metal railing
A finished basement family room with a media wall and wet bar
A remodeled laundry and mudroom with a bench, cubbies and painted cabinets
A built-in window seat in a bay window
A dining nook with a built-in banquette
A low-threshold walk-in shower with a bench and grab bar
A walk-in pantry with wood shelving
A powder room with botanical wallpaper and a stone sink
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate

Why Sunrise Manor Homeowners Choose Ameristar Construction

Mason Remodeling Sunrise Manor provides independent Ameristar cabinet repair, refacing, and installation service across Sunrise Manor, NV. We’re not the manufacturer and we’re not authorized by Ameristar. What we do is connect homeowners with independent local pros who work on Ameristar cabinets every week and can tell you on sight whether you’re looking at failing door fronts, a racked cabinet run, or something else. That matters because Ameristar cabinets are sold through builder channels and big-box stores rather than a factory service network. When a door bubbles or a wall cabinet sags, there’s no manufacturer truck to call. For a free estimate on Ameristar service in Sunrise Manor, call (855) 606-6122.

Call (855) 606-6122

Why Trust Mason Remodeling Sunrise Manor for Your Ameristar Construction?

A whole-home remodel with the living, dining and kitchen areas opened up

Ameristar builds to a recognizable set of conventions: flat-panel thermofoil doors on the Hartford and Hartford Shaker lines, painted MDF on Kirkland and Kirkland Shaker, raised-panel Bristol fronts, and a big share of ready-to-assemble boxes and drawer boxes. Our technicians have up to 22 years of experience, and that familiarity shows up in the first ten minutes of a visit. They know how the hinge plates mount, where the foil wraps under the door edge, and which joints loosen first on a wall cabinet that’s carried a dish load for a decade.

We keep the work warranty-safe. That means matching OEM Ameristar doors, drawer fronts, and hinges when a run needs to stay uniform, and choosing quality aftermarket soft-close hinges, slides, and touch-up systems when OEM parts are discontinued or weeks out. It also means the fixing happens at the cabinet, not around it: if a hinge pulled out because the particleboard behind it crumbled, we’re not going to screw a longer screw into the same soft spot and call it done.

Every crew member who comes to your Sunrise Manor door is background-checked and identity-verified under The Threshold Standard, and you get their name and photo before the visit plus a photo ID badge at the door. A written price reaches you before any work starts. Call (855) 606-6122 with a photo of the problem and we can usually tell you where to start.

Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence

Common Ameristar Construction Problems We Fix in Sunrise Manor

The Sunrise Manor climate does specific things to Ameristar cabinets. Afternoon sun through east- and south-facing kitchen windows, summer highs over 105°F, and cold winter nights cycle thermofoil through constant expansion and contraction. Here’s what we see most.

  • Thermofoil delaminating on Hartford and Kirkland-style doors. The foil lifts and blisters along the door and drawer edges first, especially on faces that take direct afternoon sun. The glue line fails before the panel does, so the door often looks fine in the middle while the edge curls.
  • Particleboard and MDF boxes swelling at the toe kick and under the sink. A slow leak or slab moisture wicks into the box panels and they crumble. You usually find out when a hinge screw stops biting. By then the damage has been hiding for a while.
  • RTA and semi-assembled joints loosening. Factory and installer joints work loose over time, wall cabinets rack slightly out of square, and the doors start rubbing at the corners instead of closing flush. On a two-story tract home, that racking can also trace back to seasonal wood movement in the wall framing.
  • Finish chipping at pull and knob holes. Factory paint and foil finishes chip where the hardware mounts, then crack outward along the stiles with repeated use. Bristol raised-panel fronts show it along the profile edges.
  • Sun-faded and mismatched runs. One section gets direct light and one doesn’t, and after a decade the two don’t match. This is common in Sunrise Manor kitchens with a west-facing slider or a window over the sink.

Ameristar Parts & Our Repair-vs-Replace Approach

A remodeled primary bathroom with a soaking tub and walk-in shower

Ameristar is sold through builder and retail channels, so there’s no factory parts counter to walk into. We source per job rather than claiming local stock. On a Hartford or Kirkland run where most doors are sound, we match OEM Ameristar doors, drawer fronts, and hinges so the repaired section blends with the rest. When OEM is discontinued or slow to arrive, quality aftermarket soft-close hinges, slides, and touch-up systems get the cabinet working correctly without waiting months.

The honest call on a failing thermofoil run is usually refacing or replacing just the affected doors. Full replacement only makes sense when the box panels are swollen, the toe kick is crumbling, or the layout itself is the problem you’re trying to fix. We won’t quote a full kitchen when new doors and a re-anchor will do, and we won’t reface boxes that are already failing behind the fronts. Call (855) 606-6122 and we’ll walk through which side of that line your kitchen sits on. Estimates are free.

Our Ameristar Service Process – Step by Step

  1. 1
    Diagnosis. We look at the door fronts, the box panels at the toe kick and under the sink, the hinge plates, and the anchor points into the wall. If a wall cabinet is racked, we check whether it’s the cabinet joints or the framing behind it.
  2. 2
    Written price and plan. You get a written price before any tool comes out, with the replacement doors, refacing scope, or re-anchoring spelled out line by line. If OEM Ameristar parts are needed, the lead time is stated up front.
  3. 3
    Repair or install. Affected fronts come off, the box and hinges get checked and re-squared, the run is re-anchored into solid framing, and replacement doors or refacing go on. Countertop and backsplash work is scheduled around the cabinet work, not the other way around.
  4. 4
    Test and walkthrough. Every door and drawer gets opened and closed. We check for rub, alignment, and soft-close function before we leave.
  5. 5
    Warranty. The work is covered in writing, and if a repair or install fails, a return visit is free.
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Ameristar Products We Service & Install in Sunrise Manor

A single-story rear room addition with tall windows and a new patio

We work on the Ameristar lines Sunrise Manor kitchens actually have: Hartford and Hartford Shaker thermofoil flat-panel doors, Kirkland and Kirkland Shaker painted MDF doors, Bristol raised-panel thermofoil door and drawer fronts, and Ameristar ready-to-assemble cabinet boxes and drawer boxes. That covers door and drawer front replacement, hinge and slide upgrades, re-anchoring and re-squaring racked runs, refacing, and full cabinet installation when the boxes are past saving.

Most Ameristar calls here fall into three sub-services: cabinet installation and refacing, quartz and granite countertops, and full kitchen remodeling. If the cabinet run is sound and the countertop is the tired part, we handle that. If the boxes are swollen at the toe kick, we’ll say so before you spend on a new top. A typical Ameristar call starts with peeling or bubbling fronts near the edges on a sun-exposed wall, or a wall cabinet that’s dropped slightly and now rubs at the corner. The usual cause is thermofoil lifting after years of desert heat and cold, sometimes paired with loose RTA or installer joints behind it. A qualified local pro pulls the affected fronts, checks whether the box and hinges are sound, re-squares and re-anchors the run, then either matches replacement doors or moves to refacing if the boxes are still solid.

We Also Service These Brands

Mason Remodeling Sunrise Manor is a multi-brand shop, not a single-brand one. Alongside Ameristar, we work with KraftMaid and other cabinet lines, Cambria and Silestone quartz surfaces, and Kohler fixtures. If your kitchen has an Ameristar run on one wall and a KraftMaid island, or Ameristar boxes under a Cambria top, we can handle the whole scope without sending you to three different contractors.

FAQs – Ameristar Construction Service in Sunrise Manor

Is Mason Remodeling Sunrise Manor authorized by Ameristar? No. Mason Remodeling Sunrise Manor is an independent service provider and is not affiliated with or authorized by Ameristar. We connect homeowners with independent local pros who work on Ameristar cabinets, and any parts we source are matched to your cabinets by model and finish.

Can I still get replacement doors for a discontinued Ameristar Hartford or Kirkland kitchen? Often, yes. Ameristar changes door styles and finishes over time, so an exact match isn’t always available. When it isn’t, we look at a close aftermarket match, or refacing the full run so the kitchen looks intentional rather than patched. Call (855) 606-6122 with the door style and a photo of the finish and we’ll tell you what’s realistic.

Why is the thermofoil peeling off my Ameristar cabinet doors? Thermofoil peels because the adhesive bond fails along the door edges, usually after years of heat cycling from direct sun and desert temperature swings. It starts at the edge and works inward. The door panel underneath is usually fine, which is why replacing just the affected fronts is often the right fix instead of a full replacement. Call (855) 606-6122 for a written price on new fronts. Estimates are free.

My Ameristar wall cabinets are pulling away from the wall – is that a cabinet failure or an installation failure? Either is possible, and it decides the fix. If the screws pulled through the cabinet back panel because the particleboard crumbled, that’s a cabinet issue. If the anchors were never into solid framing, it’s an installation issue. A technician checks both before quoting anything. Call (855) 606-6122 to schedule a look.

Can Ameristar cabinets be reused under new quartz or granite countertops? Yes, if the boxes are solid, the run is square, and the toe kick isn’t swollen. A new countertop adds real weight, so any soft box panel or loose joint needs fixing first. We check the cabinet structure before the countertop is templated, not after.

How much does Ameristar construction cost in Sunrise Manor? Cabinet work runs $4,000 – $13,000 for installation, $2,000 – $6,500 for countertops, $800 – $2,500 for backsplash, and $3,000 – $10,000 for an island. A small kitchen remodel lands at $9,000 – $20,000 and a full kitchen remodel at $14,000 – $45,000. Your written price comes before any work starts. Call (855) 606-6122 for an exact quote. Estimates are free.

Book Your Ameristar Service in Sunrise Manor, NV

Whether it’s peeling Hartford doors, a wall cabinet rubbing at the corner, or a full refacing with new quartz on top, we’ll tell you what you’re actually dealing with before anyone quotes a number. A live person answers the phone every day, including weekends and holidays. Call (855) 606-6122 for your free estimate in Sunrise Manor.

Written by the team at Mason Remodeling Sunrise Manor.

Ideas for every room in the house

Built-ins, window seats, family rooms and staircases: the changes that make a whole house work better.

Read our remodeling guides
A garage converted into a guest room and home officeNew painted shaker cabinets with an organized deep drawerA remodeled hall bathroom with patterned floor tile and painted wallsA small remodeled galley kitchen with cabinets to the ceilingA remodeled kitchen with a waterfall island and wood cabinetsA wood double vanity with two mirrors after a bathroom remodel

Explore more remodels

Every project below starts the same way: a free on-site visit and a written price.

Getting started with Mason in Sunrise Manor

Every project starts with a conversation and a written price. Here is how to take the first step.

A project lead measuring a kitchen with the homeowner during a free estimate

Free on-site estimate

A project lead walks the job with you, measures it and hands you a written, line-item price. No obligation.

Book an estimate
A remodeling crew arriving at a home with lumber and tools

Your Sunrise Manor team

A local vetted partner works across Sunrise Manor and the towns around it, to the same written standard as every Mason job.

Areas we serve
A worker laying floor protection and a dust barrier before work starts

Read our written promise

What we promise on every job, written down, with the terms spelled out before any work starts.

Our promise
Need Construction help nationwide? Licensed & insured · free written estimates
Call (855) 606-6122
Local Service Coverage

Request a Free Estimate in Sunrise Manor

Tell us what you need - Mason Remodeling Sunrise Manor responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Text Us
Call Now - 24/7 Dispatch