







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Jerith Home Additions & ADU: The Sunrise Manor Owner’s Guide
Jerith-compatible home additions in Sunrise Manor typically cost $45,000 – $130,000 installed, and an attached ADU built alongside one runs $90,000 – $220,000. We install, repair, and match parts for Jerith-series addition and ADU assemblies across Sunrise Manor and the surrounding east valley, and we quote every job in writing before work starts. Most owners don’t know a part has failed until a door drags on its frame, a panel seam opens, or a window unit stops seating flush during a wind event.
Which Jerith Models This Applies To

Jerith built addition and ADU components across several product lines, and the part you need depends on which line your structure came from. The most reliable way to identify yours is the data plate on the frame of the unit itself, usually a stamped aluminum tag on a door jamb or the inside face of a structural panel. Note the series prefix and the model number, not just the dimensions. Two units that measure the same can use different hinge sets, different glazing beads, and different fasteners depending on the year they came off the line.
If the plate is gone or unreadable, measure the rough opening width and height, the frame depth, and the spacing of the mounting holes. Those four numbers narrow the field to a short list in almost every case. From there you have a choice: the OEM part, matched exactly to your Jerith model, or a quality aftermarket equivalent built to the same specification. OEM is the safer call when your structure is otherwise sound and you want a direct fit with no modification. Aftermarket is often the better call when the original part is discontinued, or when the failure was a design weakness you don’t want to repeat. We’re an independent service provider, not affiliated with Jerith, so we’ll tell you plainly which route makes sense for your specific unit.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Jerith Home Additions & ADU Is Failing
- A door that drags or won’t latch. This is usually a dropped hinge or a frame that has shifted with seasonal soil movement. Sunrise Manor sits on expansive clay soils that swell and shrink with our monsoon cycle, and they push on a slab edge more than most homeowners expect.
- Daylight or water at a panel seam. The sealant and flashing at the seam have reached the end of their service life, typically 8 to 12 years in our UV load, and UV degrades the sealant well before the panel itself fails.
- A window unit that won’t seat flush. The gasket or glazing bead has compressed, or the frame has racked. In Sunrise Manor we regularly see this after a summer of 110-degree days followed by a hard monsoon wind.
- Cracks radiating from a fastener or corner. Fasteners that have backed out or corroded let the panel flex, and the flex shows up as a crack before it ever shows up as a leak.
- A component that no longer matches the rest of the assembly. Mismatched hardware or a mis-ordered replacement part will work against the rest of the unit. This is common after a previous repair done with the wrong series part.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

Installed replacement of a Jerith-compatible addition or ADU component in Sunrise Manor generally falls in the following bands. The price you pay depends on which part is involved, whether the part is OEM or aftermarket, and whether the frame or surrounding structure needs adjustment before the new part goes in.
| Scope | Installed Price Range |
|---|---|
| Home addition (full scope) | $45,000 – $130,000 |
| ADU construction | $90,000 – $220,000 |
| Garage conversion | $30,000 – $80,000 |
| Addition repair / part replacement | Quoted per part after inspection |
Every job gets a written, line-item price before any work starts. Parts and labor are broken out so you can see exactly what you’re paying for each. The work carries a written guarantee, and if a repair or installation fails, we return at no charge.
DIY or Call Us?
You can safely check a few things yourself: look for daylight at seams, test whether a door latches cleanly, and read the data plate on the frame to confirm your model. Those checks cost nothing and help you describe the problem accurately when you call. Where DIY goes wrong is once you start removing a part. Structural connectors, flashing, and frame fasteners all work together, and pulling one out without supporting what it holds can rack the surrounding assembly, let in water, or create a hazard. Sunrise Manor is also under local building department oversight for structural work, and a permitted job passed inspection is what protects you at resale. If the part is structural or the frame is involved, call us at (855) 606-6122 and we’ll come out, confirm what failed, and give you a written price before we touch anything.
FAQs

Sealants and gaskets typically last 8 to 12 years here because of UV load and the monsoon heat cycle. Structural panels and frames last decades if the seals are maintained and fasteners are checked. Our technicians have up to 22 years of experience with these assemblies in Nevada conditions. Call (855) 606-6122 for a free on-site assessment.
Often yes. A failed seal, a loose fastener, or a compressed gasket can be repaired in place, which costs less than a full replacement. Cracks in the panel or a bent frame usually mean replacement, not repair. We’ll tell you honestly which one your unit needs.
Most single-component replacements are a one-visit job once the correct part is on hand. Larger scopes that involve the frame or multiple panels take longer and get scheduled after the written price is approved. Call (855) 606-6122 to schedule your free estimate.
We identify your model from the data plate or from four measurements, then source the OEM part or a specification-matched equivalent through our supplier network. We verify fitment against your model before the part ships, so you’re not paying for a return. For brands we also work with like KraftMaid, Cambria, and Silestone, we apply the same verification step.
Call (855) 606-6122 to schedule your free estimate. A written price, a confirmed part match, and a crew you know by name before they arrive.
Written by the team at Mason Remodeling Sunrise Manor, serving Sunrise Manor and nearby areas.












