







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Jerith Driveway & Pavers: The Sunrise Manor Owner’s Guide
Jerith-compatible driveway and paver installations in Sunrise Manor typically run $7,000 to $18,000 for a paver driveway and $3,500 to $11,000 for a paver patio, depending on square footage, base prep, and the border and soldier-course details you choose. We’re an independent installer, not affiliated with Jerith, and we work with homeowners replacing failing sections, matching discontinued runs, or adding on to an existing Jerith-look driveway. Most owners call us after a different symptom shows up: sunken pavers at the driveway apron, joint sand washing out every monsoon season, or a run of pavers that has started to rock and settle unevenly near the garage door.
Which Jerith Product Lines This Applies To

Jerith is best known for aluminum fencing and railing, and the “driveway and pavers” pairing most Sunrise Manor homeowners mean is a Jerith-style aluminum driveway gate or railing mated to a paver driveway or paver apron. If that’s your setup, the compatibility question isn’t a model number on the pavers; it’s the post spacing and base detail where the aluminum meets the paver surface. Jerith gate posts are typically set on a concrete footing with an anchor plate or a direct-bury collar, and if the paver base was installed over that footing without a proper sleeve or isolation joint, the pavers around the post will heave and crack within a couple of seasons of our 100-plus-degree summer swings.
To identify what you have, measure post spacing center-to-center, note the post size (common aluminum residential is 2-inch square, and taller driveway gates step up to 3-inch or 4-inch posts), and photograph the base where the aluminum meets the pavers. That photo tells an installer more than any label. On the paver side, look for a stamp or a mortar joint that matches an existing run; if you’re matching a discontinued color, a quality aftermarket paver in a close profile is often the honest answer rather than chasing an exact Jerith-era match. We also service KraftMaid, Cambria, and Silestone in other parts of the house, but on the driveway, it’s pavers and aluminum.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Jerith Driveway & Pavers Setup Is Failing
Sunrise Manor sits on soils that expand and contract hard with our wet-dry cycles, and the desert sun bakes pavers to 140 degrees or more by afternoon. Here’s what tells you the installation – or the gate footing – is going.
- Joint sand washing out after rain. Monsoon downpours strip polymeric sand from joints faster here than in wetter climates, and once sand is gone, the pavers start to shift. Re-sanding alone won’t fix it if the base wasn’t compacted.
- Pavers rocking or settling near the gate post. The concrete footing for an aluminum gate post creates a rigid point in a flexible paver field. If the pavers weren’t cut cleanly around it with an isolation gap, they’ll pop and heave as the soil moves.
- Sunken driveway apron at the street. The transition from garage slab to street takes vehicle loads on a thin base. When the base aggregate wasn’t deep enough, the apron dips and water pools at the garage door.
- Cracked or chipped paver edges along the border. Edge restraint that wasn’t spiked deep enough lets the border creep outward, and paver edges chip against tires. Once the restraint fails, the whole run loosens.
- Rust streaks or white oxidation at the aluminum base. Standing water trapped against the gate post footing rusts the anchor plate and oxidizes the aluminum finish. This is a drainage problem dressed up as a finish problem.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

Here’s what installed pricing looks like in Sunrise Manor, with the full base rebuild included – not a cosmetic overlay.
| Scope | Installed Price Range | What’s Included |
|---|---|---|
| Paver driveway (full) | $7,000 – $18,000 | Excavation, compacted aggregate base, edge restraint, polymeric sand, gate post isolation |
| Paver patio | $3,500 – $11,000 | Base prep, border course, joint sand, cutwork around existing structures |
| Driveway sealing | $250 – $700 | Clean, dry, and seal existing pavers or concrete |
| Concrete driveway (alternative) | $4,500 – $12,000 | Form, pour, finish, control joints |
The price moves with square footage, base depth, whether the existing gate footing needs re-pouring, and how much cutwork the border and gate post demand. You get a written price before any work starts, every time – it’s not an upgrade or a favor. The workmanship carries our 365-Day Done Right Promise: if something we installed isn’t right within a year of completion, we make it right at no cost to you.
DIY or Call Us?
Some things you can safely check yourself. Walk the driveway and mark any paver that rocks underfoot. Look at the gate post base and photograph where the aluminum meets the paver surface. Run a hose at the driveway apron and see where water pools. Measure your post spacing and note the post size.
Where DIY goes wrong on pavers is the base. Lifting a settled paver and dropping it back on sand feels like a fix, but if the aggregate underneath wasn’t compacted to depth, that paver will settle again by the next monsoon. Re-pouring a gate post footing while keeping the surrounding pavers intact is the part that separates a lasting repair from a seasonal patch. And if your aluminum gate is a Jerith unit, the anchor detail at the footing needs to match what the post expects. That’s the kind of thing worth having a trained installer look at before you spend a weekend on it. Call us at (855) 606-6122 and we’ll tell you straight whether it’s a patch or a rebuild.
FAQs

A properly based paver driveway lasts 20 to 30 years here; the paver itself outlasts the base and joint sand, which are what fail first. Aluminum gate posts and their footings typically hold up well past a decade, but the dirt-to-aluminum transition is where problems concentrate – re-checking joint sand every year or two and resealing as needed keeps the whole assembly alive longer. Call (855) 606-6122 for a free look if you’re past 10 years and unsure of the base condition.
Usually yes, and that’s often the smart money. If the settlement is confined to a small area near the gate post or the driveway apron, we can lift, rebuild the base under those pavers, and re-set them, then blend sand and match color. Full replacement only makes sense when the base failure spans the whole driveway or the edge restraint has let the field creep. A written assessment tells you which side of that line you’re on.
A small repair around a gate post or apron is typically a one- to two-day job. A full paver driveway rebuild runs several days, mostly because proper base compaction and drying time can’t be rushed. We give you the timeline in the written price before work starts, so there are no surprises.
We’re an independent installer and not affiliated with Jerith. For aluminum gate posts and hardware, we source through vetted professional-grade suppliers and verify post size, anchor plate, and footing detail against your existing setup before ordering. On the paver side, we match profile and color from specification-grade hardscape lines. We don’t claim to stock Jerith parts or carry them on a truck – we source to your specific installation and confirm fit up front. That way you know what’s coming before it arrives.
We’re Mason Remodeling Sunrise Manor, and the driveway is where people judge a house before they knock. If your pavers are rocking, your joint sand is gone, or your gate post is starting to move, give us a call at (855) 606-6122 for a free estimate. We’ll give you the written price, tell you what we found, and let you decide. Every technician is background-checked and arrives in a clean uniform with a photo ID badge, and you’ll get their name and photo before the visit.
Written by the team at Mason Remodeling Sunrise Manor, serving Sunrise Manor and nearby areas.












