







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Therma-Tru Roofing: The Sunrise Manor Owner’s Guide
Therma-Tru roofing components for Sunrise Manor homes typically run $400 to $1,800 installed for a targeted repair, and compete roof replacement runs $8,000 to $20,000 depending on pitch, square footage, and whether the deck needs work. Most Sunrise Manor owners find us after a monsoon-season leak traces back to a Therma-Tru shingle or flashing assembly that didn’t fail all at once. You’ll usually spot it first as a brown water stain on a ceiling near an exterior wall, a shingle granule trail in the gravel bed along the foundation, or a flashing edge that has curled away from the stucco after a hard wind. By the time the stain shows, the failure has been working for a season or more.
Therma-Tru builds entry door systems and door components. Where Therma-Tru touches the roof line is at entry-door and patio-door systems: the door, frame, sill, and the roofing and flashing detail where the door head meets the wall. That intersection is where most Sunrise Manor leaks start, and it’s what this page covers. Mason Remodeling Sunrise Manor is an independent service provider, not affiliated with Therma-Tru, so we source matching components through licensed distribution and install them to spec.
Which Therma-Tru Models This Applies To

Therma-Tru entry door and patio door systems carry a model label you can find in two places: on the door slab edge (open the door and look at the hinge-side edge near the top) and on the frame header above the door, often behind a sticker on the jamb. The label lists the series and door model number, and those two pieces of information tell us exactly which sill, threshold, weatherstrip, and head flashing assembly belongs with that opening.
Therma-Tru’s fiberglass and steel door lines each use specific sill and frame configurations, and mixing a sill from one series into a frame from another is the most common compatibility mistake we see. The sill’s weatherstrip channel depth and its exterior cap profile have to match the door bottom and the threshold, or the door won’t seal and you’ll be back to a leak. When a compatible Therma-Tru replacement is available, we quote it. When a part is discontinued or a full assembly costs more than the door is worth, we quote a matching-grade equivalent from a different manufacturer and note the trade-offs in writing before you decide.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Therma-Tru Roofing Is Failing
- Water stain on a ceiling near an entry or patio door. The head flashing above the door has separated from the wall or the sealant behind it has aged out. Sunrise Manor’s UV load dries and cracks exterior sealant faster than most of the country, so this shows up on the sunny side first.
- Granule loss in the gravel next to the door. Shingles along that run are shedding their protective coating. Roofing over an entry door takes the same sun and wind as the rest of the roof; granules racing down the valley means the shingle’s service life is winding down.
- Curled or lifted shingles near the door head. Wind uplift or a nail set too high in the course above the flashing. Either way, the course is no longer laying flat and water can get under it.
- Daylight or a draft around the door frame. The flashing or jamb seal has broken, and air is coming through a spot that should be watertight. A draft here means rain can get in too.
- Visible rust on flashing, or a soft spot at the door sill. Older metal flashing has pitted through, or the sill pan isn’t draining. Softness at the sill means the penetration has been happening long enough to reach the framing.
Any one of these is a reason to get a free roof-and-door inspection. Two or more together mean water has likely been moving for a while.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

Here’s how the pricing breaks down for Sunrise Manor homeowners. Every number is installed, not just the part.
| Scope | Installed Price Range | What’s Included |
|---|---|---|
| Roof repair (flashing, localized shingle replacement at a door) | $400 – $1,800 | Removal, matching shingles, new flashing, sealant, cleanup |
| Tile roof repair (if you have tile at the entry run) | $600 – $2,500 | Lift-and-reset tile, underlayment patch, matching tile |
| Roof replacement (full) | $8,000 – $20,000 | Tear-off, deck inspection, underlayment, shingles, flashing, cleanup |
| Metal roof installation (if you’re upgrading the entry run) | $15,000 – $40,000 | Panels, fasteners, trim, flashing, edge metal |
What drives the range: roof pitch and accessible edges, how many layers of old shingle come off, tile vs asphalt, and whether the door frame itself needs repair underneath. We write the price before any work starts and itemize parts and labor so you can see what the Therma-Tru component costs on its own. The installed work carries our 365-Day Done Right Promise, and if something we install fails, we come back at no charge.
DIY or Call Us?
You can safely check for the leak yourself without going on the roof: look for ceiling stains, run a hose at the door head during a dry spell and watch for water inside, and photograph the door label. What you shouldn’t do is get on a ladder or roof to reset flashing yourself. Roof work is fall risk territory, and on a sloped or tiled section, a slip on a hot Sunrise Manor afternoon is the most common injury we hear about. Messy flashing done without the right slope and overlap is also worse than no flashing, because it hides the leak until the framing is wet.
Call (855) 606-6122 for a free estimate. A live person answers around the clock, and you’ll get the technician’s name and photo before we come out.
FAQs

How long does Therma-Tru roofing last in Sunrise Manor? Asphalt shingles around a Therma-Tru door head last about 15 to 20 years in Nevada; tile typically runs 30 to 40 years when underlayment is kept in good condition. The brutal UV index trims the far end of those ranges on any run facing west or south, so a shingle on a sun-beaten entry wall will go before the shaded side does.
Can this be repaired instead of replaced? Often, yes. A failed flashing or a localized shingle patch at the door head usually repairs for $400 to $1,800. Full replacement only makes sense when the shingles on that run are at the end of their life or the deck underneath has gone soft.
How long does the swap take? A flashing repair or localized shingle patch typically takes a half day. A full door-head re-flash plus the surrounding shingle courses can run a full day if the deck needs attention. We give you a time window in writing before the work starts.
How do you source the Therma-Tru part? We pull the model and series number from your door label, order the matching component through licensed distribution, and confirm it fits the series before we install. If the exact part has been discontinued, we quote a matching-grade equivalent and explain the difference in writing. Call (855) 606-6122 for an exact quote. Estimates are free.
We also service KraftMaid, Cambria, and Silestone products in Sunrise Manor homes.
Ready to stop the leak? Call (855) 606-6122 for your free estimate on Therma-Tru roof repair or replacement in Sunrise Manor. We’ll confirm the part, put the price in writing, and back the work for 365 days from the completion date.
Written by the team at Mason Remodeling Sunrise Manor, serving Sunrise Manor and nearby areas.












