







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Mr-Glass Home Additions & ADU: The Sunrise Manor Owner’s Guide
We install Mr-Glass-compatible additions and ADU components throughout Sunrise Manor, and a full home addition runs $45,000 – $130,000 installed, with detached ADU construction at $90,000 – $220,000 and garage conversions at $30,000 – $80,000. We’re an independent service provider, not affiliated with Mr-Glass; we work with the products, not for the manufacturer. Most Sunrise Manor owners discover a failing Mr-Glass addition the same way: a door that stops latching square, a wall that drafts in July, a sliding panel that grinds on its track, or a slow ceiling stain after a monsoon.
Unlike a garage-door spring or a window balance, a home addition or ADU doesn’t usually fail at one clean point. It telegraphs. Problem is, the systems inside a Mr-Glass addition get blamed for each other. A panel that won’t close looks like a track problem and turns out to be a shifted header. A bathroom that smells musty reads as mildew and traces back to a vapor barrier the original build skipped. Our job here is to help you identify what’s actually failing before anyone prices the fix.
Key Takeaways
- Home addition in Sunrise Manor: $45,000 – $130,000 installed
- Detached ADU: $90,000 – $220,000; garage conversion: $30,000 – $80,000
- A written price is delivered before any work begins
- 365-Day Done Right Promise covers the finished work for a full year
Which Mr-Glass Models This Applies To

Mr-Glass builds modular enclosure and structural systems for additions, sunrooms, and ADU shells, and the model line that matters most in Sunrise Manor is the room and enclosure series rather than any single “part number.” Before you order anything, find your build record. The model and series designation is usually on a plate or decal inside a door jamb panel, on the original build paperwork, or stamped on the track profile itself.
Measure the opening in two places and write both numbers down. Mr-Glass changed panel track depths and header profiles across series over the years, so a replacement glazed panel cut for one generation won’t seat cleanly in another. That mismatch is the compatibility gotcha that costs Sunrise Manor homeowners the most – they measure the visible pane, order the part, and the track height is off by a fraction of an inch.
OEM vs. Aftermarket for Mr-Glass
OEM hardware from Mr-Glass guarantees a fit but can carry a lead time and a premium. A quality aftermarket glazing gasket, roller, or latch that matches your measured spec works fine on a residential addition and often costs less. Structural members – headers, wall connectors, anchors – are where we stick to OEM or a spec-matched equivalent, because that’s where the load is carried. We source the components that need a manufacturer match from Mr-Glass and the wear items from vetted suppliers.
Model identification matters more than owners expect. Two Sunrise Manor additions from the same decade can carry different panel generations, and the replacement pieces don’t interchange.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Mr-Glass Home Additions & ADU Is Failing
These are the symptoms we see most in eastern Clark County, where summer highs routinely top 110°F and the temperature swing between a July afternoon and a winter night can hit 40 degrees or more. That swing moves a lightweight addition structure every single day.
- Doors and panels that stick or won’t latch squarely. Seasonal movement in the header or a settled footer is the usual cause, not a bad latch. If it started as a small gap and became a hard close, the frame is moving.
- Glazed panels that fog between the panes. Once the seal around a unit fails, the argon escapes and moisture gets in. A clouded panel is a failed unit, not something a cleaning product will fix.
- Drafts or heat gain you can feel at the seams. A worn gasket, a degraded sealant joint, or a vapor barrier that was never properly lapped. This is the symptom we find most often in a Sunrise Manor addition because the sun load is relentless.
- Water staining at the ceiling line or around the wall head. Flashing details that were fine at the build can fail after a season of monsoon rain pushing sideways. A stain means water is already inside the assembly.
- Grinding or squealing when a sliding panel moves. A worn roller, a scored track, or debris. Left alone, the roller chews the track and a small fix becomes a track replacement.
If you see two or more, call us. One symptom on its own is often a wear item; several at once usually means the structure is moving.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

Here’s what a full build-out costs in Sunrise Manor, and what a targeted repair looks like on top of that. These are the ranges we quote, and they’re installed and finished numbers – materials, labor, permits where required, and cleanup.
| Scope in Sunrise Manor | Typical installed range |
|---|---|
| Home addition (framed, finished) | $45,000 – $130,000 |
| ADU construction (detached) | $90,000 – $220,000 |
| Garage conversion to ADU/living space | $30,000 – $80,000 |
| Targeted panel, gasket, or track repair | Priced per diagnosis |
What drives the range: square footage, whether the structure is attached or detached, foundation and footing work, electrical and plumbing runs, and the finishes you choose. A garage conversion lands toward the low end because the shell and slab already exist. A detached ADU carries utility trenching, a new foundation, and its own roofline, which is why it starts near $90,000.
We don’t bundle parts and labor into one fuzzy number. You’ll see the line items, and the written price is delivered before any work begins – not as an upgrade, just how we work. Every project carries a written guarantee with the coverage terms stated plainly, and the 365-Day Done Right Promise means if the work isn’t right within a year of completion, we make it right at no cost to you.
DIY or Call Us?
There’s a safe line and an unsafe one.
On the safe side, you can inspect. Check that your panels close flush and latch without force, look for fogging inside a glazed unit (the glass, not the surface), run a hand along the wall head looking for a draft or a soft spot, and photograph any stain or gap with a tape measure in frame. That’s diagnostics, and it makes our visit faster.
Where DIY goes wrong is structural. Replacing a header, re-anchoring a wall connector, chasing water intrusion inside an assembly, or pulling electrical and plumbing into a new ADU – these aren’t weekend projects, and a well-intentioned fix on a moving frame can turn a repair into a rebuild. In a Sunroom or enclosure system, the load path is the whole ballgame, and a layperson can’t read it. If a panel fogged, we can talk through options. If the structure is moving or leaking, call us.
Before any crew walks onto your property, we run The Threshold Standard: every technician is background-checked, identity-verified, arrives in a clean marked uniform, shows a photo ID badge at the door, and is introduced to you by name and photo before the visit. Our technicians have up to 22 years of experience. Call (855) 606-6122 – a live person answers around the clock, every day of the year – to schedule your free estimate.
FAQs

A well-built enclosure lasts 20 to 30 years on a residential structure, but the lifespan in Sunrise Manor depends heavily on sun exposure and the expansion swing. The structure holds; the wear items go first. Gaskets, rollers, and glazing seals are what we replace on a 10-to-15-year cycle in eastern Clark County, where the heat is constant. The Nevada sun ages a sealant joint faster than the wall it protects.
Sometimes, yes – a fogged panel, a worn gasket, or a grinding roller can often be repaired without touching the structure. A moved header or a compromised wall connector can’t be patched, though. We diagnose first, tell you plainly which side of that line you’re on, and won’t sell you a rebuild when a repair will hold.
A single worn part swap, like a gasket, roller, or latch, is a short visit once we have the correct piece. A full addition or ADU build runs weeks to months depending on scope and permits. For anything with a diagnosis attached, the honest answer is we have to see it first – call (855) 606-6122 and we’ll tell you what to expect.
We identify your model from the plate or build record, take two measurements on the opening, and match the part spec to your generation. Structural pieces come from Mr-Glass on a manufacturer match; wear items come from vetted suppliers at a lower cost. We tell you which is which before anything is ordered. We also work with replacement components for KraftMaid, Cambria, and Silestone installations when a project spans both.
If your Mr-Glass addition in Sunrise Manor is showing any of the symptoms above, the next step is a free estimate with a written price and a clear diagnosis – not a guess. Call (855) 606-6122 to schedule your free estimate in Sunrise Manor and nearby areas.
Written by the team at Mason Remodeling Sunrise Manor, serving Sunrise Manor and nearby areas.












