







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
ECO Window Systems Roofing: The Sunrise Manor Owner’s Guide
If you own an ECO Window Systems product and the roofing component has failed, we install compatible replacements here in Sunrise Manor. Typical installed pricing runs $8,000 – $20,000 for a full roof replacement and $400 – $1,800 for a targeted repair, and we schedule most non-emergency work within the week. Most Sunrise Manor homeowners discover the problem the same way: a water stain on a ceiling around monsoon season, granules collecting at the base of a downspout, or a roofing contractor who won’t touch it because the system’s mounting or flashing spec isn’t standard. We are an independent service provider and are not affiliated with ECO Window Systems; we work with the parts, not the brand.
Which ECO Window Systems Models This Applies To

ECO Window Systems is best known for window and door systems, and when a roofing component is tied to one of their assemblies, it is usually a flashing, head, sill, or mounting detail at the roof-to-wall or roof-to-opening transition, not the whole field of the roof. The right part depends on the assembly, not the roof material. Start by finding the label on the interior jamb or the frame of the unit itself: series, model, and rough opening size. Photograph it. That label is how a supplier identifies the compatible head flashing or head-and-sill combination for your specific assembly.
On the OEM-versus-aftermarket question for ECO Window Systems parts specifically: OEM gives you an exact fit but often a four-to-eight week lead time from a regional distributor, and some older series are discontinued. A quality aftermarket equivalent (formed aluminum or a compatible cap flashing) can match the spec and install in days, but only if the fabricator has the actual measurements. The compatibility gotcha is head flashing width. A cap that is 1/8-inch short of the assembly head width will pass a visual inspection and leak within the first heavy rain. We measure the opening and the wall assembly before we order anything.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your ECO Window Systems Roofing Is Failing
- Water stains on the ceiling or wall directly below. This usually traces to failed flashing at the assembly head, where sealant has dried out and cracked after a summer of 110°F-plus days in Sunrise Manor. Sealant is temporary; the flashing itself is what keeps water out.
- Granules collecting at the base of a downspout. Asphalt shingles shed granules as they age, and heavy deposits mean the shingle field is nearing the end of its service life. On a Sunrise Manor roof with our UV load, a standard 3-tab shingle that should last 20 years in a cooler climate can show this at 12 to 15.
- Visible cracks or gaps at the roof-to-wall junction. Adhesive failure at a flashing-to-wall seam, most often because the original install used a construction adhesive rather than a mechanical fastener and proper counter-flashing. It leaks before you can see it.
- Rust streaks or pitted metal at fasteners. Moisture is reaching the fastener head, which means the seal above it has failed. Each rusted fastener is a future leak point, and they tend to fail in groups.
- Interior paint peeling or bubbling near the assembly perimeter. Moisture is migrating through the wall cavity rather than the roof surface, which points at the transition detail and not the shingle field. This one is easy to misdiagnose as a plumbing or stucco issue.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

These are installed ranges for Sunrise Manor, market-calibrated and covering parts plus labor together. We don’t quote a parts-only price and then add labor later; the number you get is the number.
- Roof repair (flashing, localized assembly fix): $400 – $1,800
- Full roof replacement: $8,000 – $20,000
- Metal roof installation: $15,000 – $40,000
- Tile roof repair: $600 – $2,500
The range moves with roof size, pitch, material, and how much decking needs replacement once we open it up. Every project gets a written price before any work starts, not a verbal estimate that grows later. Workmanship is covered for 365 days from the completion date, and if a repair fails within that window, we come back at no charge.
DIY or Call Us?
You can safely check a few things yourself: photograph the interior label, look for granule accumulation at downspouts, and note any ceiling stains. That information makes the estimate faster and more accurate. What you should not do yourself is get on a steep pitched roof in Sunrise Manor’s summer heat, or attempt to re-flash a roof-to-wall transition where the failure mode is invisible from above. Falls and heat illness account for most roofing injuries, and a roof at 140°F surface temperature will hurt you before you realize it. We have technicians with up to 22 years of experience who do this safely and correctly. Call (855) 606-6122 and we’ll get an honest answer to you quickly.
FAQs

A properly installed asphalt roof here lasts 15 to 20 years, less if the roof faces unshaded afternoon sun and ventilation is poor. Metal systems run 40-plus years with maintenance. Flashing repairs last as long as the material, not the sealant; we use mechanical fastening and proper counter-flashing so the fix holds through monsoon season.
Often yes. If the failure is localized to flashing, head, or a specific transition, a targeted repair in the $400 – $1,800 range is usually the right call. We only recommend replacement when the shingle field or decking is also at end of life. We’ll tell you which you need before any work starts.
A localized repair is typically a one-day job. A full roof replacement usually takes two to four days depending on size and pitch. We’ll give you the specific timeline with your written price so you can plan around it.
We measure the actual assembly and order the compatible flashing or component from a supplier, whether that’s an OEM ECO Window Systems part or a matched aftermarket equivalent. We don’t carry parts on a truck and we don’t guess from a photo. Measuring first is what prevents the short-flashing leak. For non-roofing cabinetry and surface work, we also partner with KraftMaid, Cambria, and Silestone.
If any of this sounds like your roof, call us at (855) 606-6122 for a free estimate. We’ll send a technician whose name and photo you get in advance, with a photo ID badge at the door, and a written price before a tool is opened. A live person answers every call, every day.
Written by the team at Mason Remodeling Sunrise Manor, serving Sunrise Manor and nearby areas.












