A Mason company - serving Sunrise Manor, NV
An open living room and dining area after a whole-home remodel
PGT · Sunrise Manor

PGT Windows & Doors in Sunrise Manor, NV

Free Estimate on SiteCalls Answered by a Live Person, 24/7Background-Checked TechniciansA Local Team in Sunrise Manor
A built-in window seat in a bay window
A dining nook with a built-in banquette
A home office with a built-in desk and shelves
An open living space after a whole-home remodel
A remodeled living room with built-in shelves around the fireplace
A small remodeled galley kitchen with cabinets to the ceiling
A low-threshold walk-in shower with a bench and grab bar
A walk-in pantry with wood shelving
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate

PGT Windows & Doors: The Sunrise Manor Owner’s Guide

We install PGT-compatible windows and doors for Sunrise Manor homeowners, and most whole-home window replacements run $4,500 – $15,000, with impact-rated units reaching $8,000 – $25,000 when the whole house is switched over to laminated glass. When a specific part fails – a sash balance, a roller, a lock, a glazing bead – our technicians (up to 22 years of experience) match the replacement to your PGT series and swap it without disturbing the rest of the unit. Mason Remodeling Sunrise Manor is an independent service provider and is not affiliated with PGT.

Call (855) 606-6122

Owners usually find the failure the hard way. A single-hung sash in a 2005-era Sunrise Manor tract home suddenly won’t stay up, or a sliding patio door that opened smoothly last summer now grinds two inches and stops. Sometimes it’s quieter: a fogged pane between the glass, a handle that turns but won’t latch, or a screen frame that has pulled loose from its corners after a June of 110-degree afternoons. Each of those points to a different part, and knowing which one you’re dealing with is the whole job.

Which PGT Models This Applies To

A finished basement family room with a media wall and wet bar

PGT’s residential lines – WinGuard impact products, Aluminum Series sliding doors, and the vinyl new-construction and replacement windows common in Sunrise Manor’s 1990s-through-2000s subdivisions – each use different hardware and different sash geometry. A tilt-latch from an Aluminum Series unit won’t seat in a WinGuard vinyl sash, and roller assemblies differ between a 1½-inch and a 2-inch door stile. The fastest way to identify what you have is the etched label in the upper corner of the glass (it carries the series and glass make-up) or the manufacturer sticker inside the head jamb or on the door’s top track. If both are gone, we measure the visible glass, the overall frame, and the sash thickness – those three numbers narrow the model family quickly.

The OEM-versus-aftermarket call matters more with PGT than with most brands. Original PGT hardware is the surest fit for WinGuard units, especially locks and multi-point hardware that have to align with the frame’s strike pockets. For balances, rollers, weatherstrip, and glazing bead, a quality aftermarket equivalent is often indistinguishable in service life and costs less. We tell you which side of that line your part falls on before you commit.

Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence

Signs Your PGT Windows & Doors Is Failing

  • Sash won’t stay open, or slams shut. The spiral or block-and-tackle balance has lost tension – a predictable failure after years of UV exposure and daily cycling in Sunrise Manor heat.
  • Patio door drags or jumps the track. Rollers flatten and the track collects desert grit; the wheel is usually the culprit, though a bent track can mimic it.
  • Fog or condensation between the panes. The sealed unit’s perimeter seal has failed and moisture has entered the airspace. The glass unit needs replacing; cleaning won’t fix it.
  • Handle turns but the door or window won’t latch. A worn keeper, a misaligned strike, or a lock mechanism that has lost its throw. Common on west-facing doors after a summer of expansion and contraction.
  • Draft or dust at the frame edge. Weatherstrip has compressed or the glazing bead has shrunk, letting fine desert dust and hot air past the seal.
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Replacement Cost & What’s Included

A wide opening with a new beam where the kitchen wall was removed

In Sunrise Manor, a single window replacement runs $4,500 – $15,000 for a multi-unit job, and impact window installation runs $8,000 – $25,000 depending on unit count and glass rating. A one-off part swap – a balance, a roller set, a lock, a glazing bead – sits far below those figures and is quoted line by line: part cost, labor, and any track or frame work, in writing before we start. The range is driven by how many units you’re doing, whether the glass unit itself needs replacing versus just the hardware, and whether the frame or track needs repair alongside the part.

Every job comes with a written price before any work begins and our 365-Day Done Right Promise – if the work isn’t right within a year of completion, we make it right at no cost. Every part we install is covered under that guarantee, and if something fails, we come back free.

DIY or Call Us?

You can safely check a few things yourself: confirm the glass label, measure the visible glass and frame, wipe the track clean, and see whether a roller turns freely. What goes wrong with DIY on PGT hardware is the fitting – the wrong balance rating causes a sash to drop, an aftermarket lock that doesn’t align with the strike pockets leaves the unit unsecured, and forcing a sealed glass unit into a frame that’s out of square cracks it. None of that is dangerous, but it costs more to fix than to do right the first time. Give us a call at (855) 606-6122 and we’ll tell you honestly whether your part is a quick swap or a bigger job.

FAQs

A stone counter, tile backsplash and open shelf after a kitchen remodel

How long do PGT window and door parts last in Sunrise Manor? Balances and rollers typically last 10 – 15 years before tension or smoothness fades, and sealed glass units often fail sooner in our heat. Sunrise Manor’s summer UV and 100-plus-degree swings accelerate wear on weatherstrip and hardware.

Can a failed PGT part be repaired instead of replaced? Sometimes. A balance can occasionally be re-tensioned and a roller cleaned and re-seated, but once hardware has cracked or a seal has failed, replacement is the lasting fix. We’ll tell you which applies to your unit.

How long does a PGT part swap take? A single balance, roller set, or lock is usually a short visit – often under an hour per unit. Glass unit replacement takes longer because the sealed unit has to be ordered to your measurements.

How do you source the right PGT part? We match by series label, glass etch, and measurements, and we check OEM versus quality aftermarket for fit and value. Call (855) 606-6122 for a free estimate – we’ll confirm the part before we quote.

We also work with KraftMaid, Cambria, and Silestone on the interior side, so a window or door job can sit alongside a larger remodel without a second contractor. For window and door parts in Sunrise Manor, call (855) 606-6122 for a free estimate – a live person answers around the clock, every day.

Written by the team at Mason Remodeling Sunrise Manor, serving Sunrise Manor and nearby areas.

Ideas for every room in the house

Built-ins, window seats, family rooms and staircases: the changes that make a whole house work better.

Read our remodeling guides
A powder room with botanical wallpaper and a stone sinkA remodeled primary bathroom with a soaking tub and walk-in showerA single-story rear room addition with tall windows and a new patioAn open kitchen and dining area after a remodelA freestanding soaking tub in a remodeled primary bathroomA second-story addition that matches the existing roofline

Explore more remodels

Every project below starts the same way: a free on-site visit and a written price.

Getting started with Mason in Sunrise Manor

Every project starts with a conversation and a written price. Here is how to take the first step.

A project lead measuring a kitchen with the homeowner during a free estimate

Free on-site estimate

A project lead walks the job with you, measures it and hands you a written, line-item price. No obligation.

Book an estimate
A remodeling crew arriving at a home with lumber and tools

Your Sunrise Manor team

A local vetted partner works across Sunrise Manor and the towns around it, to the same written standard as every Mason job.

Areas we serve
A worker laying floor protection and a dust barrier before work starts

Read our written promise

What we promise on every job, written down, with the terms spelled out before any work starts.

Our promise
Need Construction help nationwide? Licensed & insured · free written estimates
Call (855) 606-6122
Local Service Coverage

Request a Free Estimate in Sunrise Manor

Tell us what you need - Mason Remodeling Sunrise Manor responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Text Us
Call Now - 24/7 Dispatch