







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Boral Windows & Doors: The Sunrise Manor Owner’s Guide
We install and service Boral-compatible windows and doors in Sunrise Manor, and most whole-unit replacements run $4,500 – $15,000 for standard windows, or $8,000 – $25,000 when you step up to impact-rated glass. We are an independent service provider and are not affiliated with Boral. Planned replacements are scheduled, not same-day; a written price comes before any work starts.
Owners usually find the problem the same way. A window that used to close with a firm click now needs a shoulder to seat. A door drags on the threshold in July and swings free by November. Or a foggy pane shows up between the glass after a monsoon, and you realize the seal that was supposed to last decades is gone. In Sunrise Manor, the swing between 110-degree summers and cool desert nights works seals and weatherstripping harder than most of the country ever will, and that is where most Boral part failures start.
Key takeaways:
- Identify your exact Boral series and glass package before ordering any part.
- Weatherstripping and glazing seals fail first in Southern Nevada heat.
- Hinges, rollers, and lock hardware are the most-replaceable pieces.
- A failed sealed unit or rotted frame usually means a whole-unit swap, not a part.
Which Boral Models This Applies To

Boral’s residential window and door lines run under several series names, and the part you need depends entirely on which one is in your wall. Before anything gets ordered, we check the manufacturer’s label, usually a small sticker on the upper corner of the frame or in the head jamb channel, and record the series, the glass package, and the rough opening measurements. That label is the difference between a part that fits and one that gets returned. If the label is gone, we measure the frame and the glass unit directly and cross-reference the profile.
The OEM-versus-aftermarket call matters more with Boral than with generic brands. Boral uses its own sash and frame profiles, so a hardware kit from a big-box store rarely matches the mortise or the roller track correctly. Genuine Boral replacement parts are the safe route when the piece is a moving part that has to seat precisely. For weatherstripping, glazing gaskets, and sealants, quality aftermarket equivalents are often the smarter buy: they meet or beat the original spec and cost less. Our technicians have up to 22 years of experience matching the right part to the right series, and that is where the time gets saved.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Boral Windows & Doors Is Failing
Here are the five symptoms Sunrise Manor owners call us about most, and what each one actually means underneath:
- The window is foggy or has condensation between the panes. The sealed glass unit has lost its desiccant seal, letting moisture in. In our heat, that seal often gives out years before the glass itself does.
- A door drags on the threshold or rubs the jamb. Usually the hinge screws have loosened in the frame, or the door slab has swelled from seasonal humidity swings, which throws the reveal out of square.
- You feel a draft or hear wind whistle around the frame. The weatherstripping has compressed, cracked, or peeled away. This is the single most common failure in Southern Nevada, where the sun bakes the gasket material brittle.
- The sash won’t slide or tilt smoothly. The roller or sash balance has worn or the track has filled with desert grit and dust. Left alone, a stiff sash eventually cracks the frame.
- The lock or handle feels loose or won’t catch. The lock mechanism or the keeper has worn, and it often signals the sash has shifted out of alignment rather than the lock itself being broken.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

Window replacement in Sunrise Manor runs $4,500 – $15,000, and impact window installation runs $8,000 – $25,000. Those ranges are the full installed price: the unit, the parts, the labor, the removal and haul-away of the old unit, and sealing the opening. What pushes you toward the top of the range is the number of openings, the size and glass package, whether the frame needs rebuilding, and whether you choose impact-rated glass.
We give you a written, line-item price before any tool comes out, so you can see the parts cost and the labor cost separately. Parts-plus-labor transparency is not a favor we do on request; it is standard on every project. Every completed job is covered by a written guarantee with terms stated plainly, including what is covered, what is excluded, and for how long, backed by our 365-Day Done Right Promise. If a repair or installation fails, we come back at no charge, no dispute process, no conditions.
DIY or Call Us?
Some things are safe to check yourself. You can look for the Boral label, measure your frame, test whether the draft is coming from the weatherstripping or the glass, and wipe out a gritty roller track. Tightening a loose hinge screw with a screwdriver is fine too. That is where the safe ground ends.
Window and door work is heavy, sharp, and done at height, and a failed glass unit means handling large panes that can shatter. Replacing a sealed glass unit, re-hanging or resquaring a door, or swapping hardware that has to seat precisely is not a job to learn on your own home. A wrong measurement turns a part swap into a full unit replacement. Our crews are background-checked, uniformed, and you get the technician’s name and photo before the visit, plus a photo ID badge at the door through The Threshold Standard. Call (855) 606-6122 to schedule your free estimate.
FAQs

Well-installed Boral windows last 20 to 30 years, but in Southern Nevada’s climate the weatherstripping and glazing seals often fail in 10 to 15 years, well before the frame or glass does. The 110-degree summers and dry air break down gaskets faster than the structural parts, so expect to replace seals and hardware at least once before the unit itself needs replacing. Call (855) 606-6122 for an exact quote – estimates are free.
Often yes. Weatherstripping, hinges, rollers, locks, and gaskets can usually be swapped while keeping the original frame and glass. A fogged sealed glass unit or a rotted frame is a different story and typically calls for a full unit replacement. We assess which is which during the estimate. Call (855) 606-6122 to schedule it.
Most weatherstripping and hardware swaps finish in a couple of hours, while a full window or door replacement runs a half day to a full day per opening depending on size and how the old unit comes out. We give you the timeline in writing with the price. Call (855) 606-6122 for your written estimate.
We identify your exact Boral series from the frame label or direct measurement, then match the part to that profile, choosing genuine Boral parts for precision moving components and quality aftermarket equivalents for seals and gaskets. We do not claim to carry parts in stock, so we source the right piece for your unit. Call (855) 606-6122 to get the matching part priced.
For windows and doors we also service KraftMaid, Cambria, and Silestone across Sunrise Manor.
If your Boral window or door has a failed part, the fastest path to a fix is a written price. Reach us at Mason Remodeling Sunrise Manor at (855) 606-6122 for a free estimate, and we will confirm who is coming, what it will cost, and what is guaranteed before any work begins.
Written by the team at Mason Remodeling Sunrise Manor, serving Sunrise Manor and nearby areas.












