







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
GAF Kitchen Remodeling: The Sunrise Manor Owner’s Guide
For a Sunrise Manor homeowner with a GAF roofing or building-products name in hand, a kitchen remodel built around GAF-compatible components typically runs $14,000 to $45,000 installed, with smaller kitchens landing between $9,000 and $20,000. We’re an independent remodeling company, not affiliated with GAF, and we schedule planned kitchen work around your timeline rather than same-day. Most owners arrive at this page after a failure they didn’t expect: a sagging cabinet run, a countertop seam that lifted, or a backsplash that cracked loose from the wall.
That kind of discovery rarely happens all at once. It starts with a cabinet door that won’t close flush, then a soft spot under the sink, then a countertop that flexes when you lean on it.
Key Takeaways
- GAF-compatible kitchen remodels in Sunrise Manor: $14,000 – $45,000 installed.
- Small kitchen remodels: $9,000 – $20,000.
- Written price before any work starts, on every project.
- Every crew member is identity-verified and arrives with a photo ID badge.
- 365-Day Done Right Promise backs the completed work for a full year.
Which GAF Models This Applies To

GAF is best known for roofing, but the brand name shows up on homeowners’ paperwork when a previous kitchen project bundled GAF-managed materials or a contractor used GAF-labeled underlayment, flashing tape, or decking components. Before we quote anything, we identify what’s actually failing. Match the part, not the brand, to your kitchen.
Three things to check before you assume you need a full replacement:
- The label. Pull out a drawer and look at the cabinet back panel or the underside of the countertop for a spec sticker. GAF-labeled components usually carry a series code and a batch number. Photograph it, because that code tells us the production window and material spec.
- The measurement. Cabinet boxes and countertop slabs are sized to the nearest 1/8 inch. Bring us a width, depth, and height and we’ll cross-reference against current stock availability from our surface partners like Cambria, Silestone, and Caesarstone.
- The age of the adjacent material. A part that fails at year 6 in Sunrise Manor’s dry heat is often a different failure mode than one that fails at year 15. The comparison changes the answer.
Here’s the OEM-versus-aftermarket decision that trips people up with GAF specifically: GAF-managed kitchen components are often discontinued at the series level after a production window closes, so exact aftermarket matches are sometimes unavailable. A quality equivalent is usually the right call. It’s also often the better call because the original spec was selected for a different climate than Sunrise Manor’s. We source through our established supply partners and tell you plainly when a match is exact and when it’s a compatible equivalent.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your GAF Kitchen Remodeling Is Failing
Watch for these five. Each one points to a specific underlying cause, and the fix differs depending on which one you’re seeing.
- A cabinet door that hangs or rubs. This is usually a hinge failure or a cabinet box that’s settling. In Sunrise Manor’s summer heat, wood expands and contracts more than the hardware was rated for, and the hinge screws lose bite in the soft particle board behind them.
- A countertop seam you can run a fingernail into. The adhesive bond has failed along the joint. That gap lets moisture in, and once water reaches the substrate, the slab edge starts to lift.
- A backsplash tile that sounds hollow when tapped. Thinset has separated from the wall, usually from substrate movement. Tap along the wall with a screwdriver handle and listen for the change in tone.
- Soft spots or dark staining under the sink cabinet floor. Water intrusion has been happening long enough to damage the cabinet base. This is the one we see most often in Sunrise Manor, where a slow drip behind a cabinet is easy to miss for months.
- A countertop that flexes when you press down. The substrate under the slab has failed or wasn’t installed to spec. A countertop that flexes is on borrowed time, and it’s a genuine injury risk if it gives while you’re leaning on it.
None of these are cosmetic. Each one has a specific repair path, and delaying the call costs more than making it.
Replacement Cost & What’s Included

Here’s what a GAF-compatible kitchen remodel costs in Sunrise Manor, broken down by component so you can see exactly what drives the range:
| Component | Installed Range |
|---|---|
| Full kitchen remodel | $14,000 – $45,000 |
| Small kitchen remodel | $9,000 – $20,000 |
| Cabinet installation | $4,000 – $13,000 |
| Countertop installation | $2,000 – $6,500 |
| Backsplash installation | $800 – $2,500 |
| Kitchen island installation | $3,000 – $10,000 |
What drives the range: cabinet grade and door style, countertop material (a Cambria quartz slab costs more than a stock Silestone option, and both come from our surface partners), the amount of existing material that has to come out, and whether plumbing or electrical has to move. Every quote separates parts cost from labor cost so you can see the split. Sunrise Manor’s heat affects material selection and installation timing, and we factor both into the written price.
Every project is covered by the 365-Day Done Right Promise. If the work isn’t right within a year of completion, we make it right at no cost to you. Written guarantee terms state exactly what’s covered, what’s excluded, and for how long. Free return visit if a repair or installation fails: no charge, no dispute process, no conditions. And you get a written price before a single tool is unpacked, every time.
See the difference
Before
After
Before
After
Before
AfterDIY or Call Us?
You can safely do three things. Photograph the labels on your cabinet back panel and countertop underside. Measure the failing component in both dimensions. Tap the wall to map where the hollow spots are. Beyond that, the work belongs to a trained installer, and the reasons break down this way:
- Cabinet removal and replacement involves shutting off water and gas lines at the wall, and a crossed gas line is a genuine safety hazard. This isn’t the place to learn.
- Countertop slab handling is a two-person minimum job. A slab that slips off a sawhorse can break bones as easily as stone. Do not attempt this solo.
- Backsplash and tile work looks forgiving but isn’t. Substrate prep, thinset consistency, and grout timing all fail visibly, and redoing it once costs more than having it done right the first time.
- Electrical work for under-cabinet lighting or a relocated outlet belongs to a licensed electrician. That’s a permit issue and a fire-risk issue.
Call (855) 606-6122 and we’ll walk through what you’re seeing, tell you what it likely costs, and book a free estimate. A live person answers every call, 24 hours a day, 7 days a week, including weekends and holidays.
FAQs

Fifteen to 25 years for cabinets and countertops, but the dry desert climate shortens that in specific ways: caulk joints and cabinet hardware fail at year 5 to 7 rather than year 10, and countertop seams need inspection every 3 years. Re-sealing grout every 4 to 5 years extends the life of tile work significantly. Call (855) 606-6122 for an inspection-based quote.
Sometimes. A single stuck hinge or a hairline countertop seam is often a repair. A countertop that flexes, a cabinet base with water damage, or a backsplash with widespread hollow spots is a replacement. We’ll tell you honestly which side of that line you’re on, and the written price reflects whichever option is right. Call (855) 606-6122 for a free estimate.
A single cabinet door or hinge: 30 to 60 minutes. A countertop replacement: 1 to 2 days for the install plus a curing window for the adhesive. A full small kitchen remodel: 2 to 3 weeks. We schedule around your household so your kitchen isn’t out of service longer than necessary.
We match against the spec label on your existing component, cross-reference with our supply partners, and present both the exact-match and compatible-equivalent options with pricing on each. You see the sourcing path before you commit. Call (855) 606-6122 to schedule your free estimate.
Before You Call: What to Have Ready
When you call for your free estimate, having these in hand shortens the conversation:
- A photo of the failing component, including any visible label or spec sticker.
- The width, depth, and height of the component, measured to the nearest 1/8 inch.
- The rough age of the kitchen and the year the previous remodel was done, if you know it.
- Any water damage you’ve noticed, plus whether the sink or dishwasher has been leaking.
We also service KraftMaid and Silestone components alongside Cambria, so if your kitchen has a mix of brands, one visit covers the whole picture.
Contact Mason Remodeling Sunrise Manor
We install GAF-compatible kitchen components across Sunrise Manor and the surrounding Las Vegas valley neighborhoods with a written price delivered before any work starts, background-checked and identity-verified crews, and the 365-Day Done Right Promise on every project. You’ll receive your technician’s name and photo before the visit and see a photo ID badge at the door. Call (855) 606-6122 for a free estimate, and a live person will answer.
Written by the team at Mason Remodeling Sunrise Manor, serving Sunrise Manor and nearby areas.












