







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Sterling Driveway & Pavers: The Sunrise Manor Owner’s Guide
We install and repair Sterling-compatible paver driveways in Sunrise Manor, and a full paver driveway typically runs $7,000 – $18,000 installed, with concrete driveway replacement at $4,500 – $12,000 and asphalt paving at $3,500 – $9,000. If you’re replacing a single failed component, sealing runs $250 – $700 and spot paver resetting often lands between those. Owners usually notice the problem after a monsoon season, when water pools against the garage slab, seams open up, or a section of pavers shifts underfoot after a hard rain. That’s when the calls start.
We’re an independent service provider. We’re not affiliated with Sterling, but we know these systems well and can match the right part and the right installation approach to what you have.
Which Sterling Models This Applies To

Sterling driveway and paver products show up across a range of series, and the model number matters more than most homeowners expect. The good news is that the identifier is almost always stamped on the underside of the paver field, on the concrete pad edge, or on the original install documentation. If you can photograph that stamp, we can usually match the grade and profile without a site visit.
The difference between OEM and aftermarket matters here in a specific way. Sterling pavers are manufactured to a consistent thickness tolerance, and if you’ve got a field of 2 3/8-inch pavers and try to slot in a generic 2 1/4-inch paver from a big-box pallet, the joint will telegraph within a year. In Sunrise Manor’s heat, that 1/8-inch gap opens faster than you’d think. For small repairs, a quality aftermarket paver from a hardscape supplier like Belgard or Techo-Bloc can work fine if the thickness matches, but for a field repair or a visible section, matching the original Sterling profile is worth the extra sourcing time.
How to identify what you have: check the stamp, measure the thickness with a caliper (not a tape measure), and note whether the unit is interlocking or straight-edge. Those three details narrow the model line reliably.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Sterling Driveway & Pavers Is Failing
Here’s the honest symptom list, with the cause behind each one, so you know what you’re actually looking at before anyone quotes you:
- Ponding water after rain. The base has settled unevenly or the compaction was never right. In Sunrise Manor, our caliche-heavy soil doesn’t drain like the sandy stuff installers expect in other markets, and a base that wasn’t over-excavated and re-compacted will move within two summers.
- Individual pavers rocking underfoot. The bedding sand has washed out or the edge restraint has failed. One rocking paver usually means five more are loose and you can’t see it yet.
- Joint sand washing out or weeds between pavers. The joint sand has eroded, or the sealer coat has worn through. This is a maintenance issue, not a structural one, but if it’s ignored for two seasons the joints widen and the field starts to spread.
- Cracks along the driveway edge or against the garage slab. Edge restraint failure or frost heave in the transition zone. Even in the desert, the temperature swing between a 110-degree day and a 50-degree night moves concrete and pavers differently, and that joint is where it shows.
- Sealer peeling or going chalky within a year of application. Either the wrong sealer was used or it was applied over a damp surface. Both are common, both are fixable, and both cost more to correct than they would have cost to do right.
Replacement Cost & What’s Included

Here’s what installed pricing looks like in Sunrise Manor, using line-item ranges you can self-qualify against:
- Paver driveway installation: $7,000 – $18,000
- Concrete driveway installation: $4,500 – $12,000
- Asphalt driveway paving: $3,500 – $9,000
- Driveway replacement: $5,000 – $14,000
- Driveway sealing: $250 – $700
- Paver patio installation: $3,500 – $11,000
What drives the range on a paver driveway: square footage, base depth, whether existing material has to be demolished and hauled, edge restraint type, and whether a drainage correction is needed. The base prep is the part nobody sees and the part that decides whether the driveway lasts. What’s included in our written price: demo and haul-off, base excavation and compaction, geotextile fabric where needed, bedding sand, the pavers themselves, edge restraint, polymeric joint sand, and a final cleanup. We deliver the written price before any work starts, and the work carries a written 365-Day Done Right Promise.
See the difference
Before
After
Before
After
Before
AfterDIY or Call Us?
What you can safely check yourself: photograph the stamp, measure the paver thickness, note where water pools, and check whether the edge restraint is intact. Those four things help us quote accurately and cost you nothing.
Where DIY goes wrong on a paver driveway: base prep. This is the part that determines whether the job holds, and it’s the part most homeowners underestimate. You cannot fix a failed base by adding sand and re-setting the top course. If the pavers are rocking because the sub-base moved, the work is excavation, re-compaction, and rebuild. That’s a machine job, and it’s the difference between a driveway that survives a Sunrise Manor summer and one that doesn’t. Heavy lifting, demolition, and compaction are the parts we’d gently steer you away from doing yourself.
Call (855) 606-6122 and we’ll tell you honestly whether a repair or a rebuild is the right call. The estimate is free.
FAQs

How long does a Sterling paver driveway last in Sunrise Manor? A properly installed paver driveway lasts 25 – 30 years in this climate if the base was done right and joints are refilled every few years. The failure mode here isn’t the pavers, it’s the base and the joint sand.
Can a failing paver be repaired instead of replaced? Yes, often. A localized failure where the base is still sound can be lifted, re-bedded, and reset for a fraction of full replacement. If more than about 20 percent of the field is rocking, replacement is usually the better value. Call (855) 606-6122 and we’ll tell you which side of that line you’re on.
How long does the swap take? A single-section repair is typically a one-day job. A full paver driveway replacement runs 3 – 5 days depending on square footage and whether demolition is needed. We’ll give you a written timeline with the written price.
How do you source the Sterling-compatible part? We work from the stamp and your measurements, then source through hardscape suppliers we’ve vetted, including Belgard and Techo-Bloc for compatible profiles. We don’t stock parts and nothing comes off a truck, but we can usually match your grade within a few business days.
We also service KraftMaid, Cambria, and Silestone products for homeowners who want one call to cover more than the driveway.
Get Your Free Estimate
If your Sterling driveway or paver system is showing its age, we’ll come out, look at it honestly, and put the price in writing before anything starts. Every crew member is background-checked and identity-verified, and you’ll receive their name and photo before the visit under The Threshold Standard. Call (855) 606-6122 to schedule your free estimate in Sunrise Manor.
Written by the team at Mason Remodeling Sunrise Manor, serving Sunrise Manor and nearby areas.












