







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Schluter Driveway & Pavers: The Sunrise Manor Owner’s Guide
We install and repair Schluter edge protection, drainage, and paver-edge systems on driveways and paver surfaces throughout Sunrise Manor. A full paver driveway installation runs $7,000 – $18,000 here, while a targeted repair to a failing trim or drainage line usually lands in the low hundreds. Most Sunrise Manor homeowners find us the day they notice a loose Schluter strip lifting at the garage apron, a wobbling paver edge, or sand washing out along the drive after a monsoon.
You can identify what you have in about two minutes. Look at the metal edge trim, the drainage channel, or the paver border Schluter product on your drive, note its color and profile, measure its width, and call us with those details. We’ll tell you the series, the compatible replacement, and what the fix costs before anyone touches the driveway.
Key Takeaways
- Schluter driveway & paver parts in Sunrise Manor range from about $200 for a small trim repair to $18,000 for a full paver driveway.
- We’re an independent service provider, not affiliated with Schluter, but we know the parts and the compatible equivalents that hold up in Nevada heat.
- Every Sunrise Manor job gets a written price before work starts, backed by our 365-Day Done Right Promise.
Which Schluter Models This Applies To

Schluter makes several product families that show up on driveways and paver surfaces in Sunrise Manor, and the right replacement depends on which one you have. The most common is Schluter DILEX, a metal or plastic profile that protects the exposed edge where pavers meet concrete, asphalt, or a step. Schluter TREP-B and TREP-E are stair-nosing profiles on paver steps. Schluter KERDI-DRAIN and its gravel-drive siblings handle surface drainage at the apron or along the low side of a sloped drive. Schluter RENO-U and RENO-TK are transition profiles that bridge pavers to a different hard surface.
Here’s a real compatibility gotcha: the width designation on a Schluter profile (say, DILEX-EK in 3/8″ or 1/2″) must match the paver thickness plus the bed depth, not just the paver. A 2-3/8″ paver with a 1″ sand setting bed needs a profile sized to the total assembly, and installing a trim sized only to the paver face is the number one reason these fail early in Sunrise Manor. Measure the total edge height, not the paver alone.
On the OEM-versus-aftermarket question: Schluter’s own profiles are designed to pair with Schluter’s membranes and accessories, and matching the original system is the safest path when your existing install is cohesive. A quality aftermarket profile in the same width and profile shape can work, and we’ll tell you honestly when it’s a fair trade and when staying OEM is the better call. We don’t stock parts or carry them on a truck. We source the correct part for your job and bring it, verified against your measurements, before we start.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Schluter Driveway & Pavers Is Failing
These are the failure signals we see most often on Sunrise Manor drives. Each one points to what’s actually going wrong underneath.
- A trim strip lifting or rocking at the garage apron. Usually adhesive or bedding failure where the profile was set against the concrete slab; the sun here bakes that joint and accelerates the separation.
- Pavers wobbling or dropping along the driveway edge. The edge restraint has loosened, so pavers at the perimeter migrate. Left alone, the movement spreads inward across your drive.
- Sand washing out after a storm. The drainage line or profile has lost its sealing edge, so water flows under the pavers instead of away. Sunrise Manor’s monsoon bursts move that sand fast.
- Visible cracks or bends in a stair-nosing profile. Heat expansion against a rigid profile, or a paver that shifted and pushed on it. A bent nosing is a trip hazard on steps.
- Standing water at the apron or along the low side. Your drainage channel is clogged, mis-sloped, or the wrong profile for the grade. This is what undermines the paver bed under it.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

Here’s what these jobs run in Sunrise Manor, with the part and labor together:
- Edge profile or trim strip replacement (small section): $200 – $600
- Full-length edge trim replacement with reset pavers: $600 – $1,500
- Drainage channel repair or rework: $400 – $1,200
- Stair-nosing profile replacement on paver steps: $300 – $900
- Full paver driveway installation: $7,000 – $18,000
- Paver patio installation: $3,500 – $11,000
The range depends on length, whether pavers need resetting, how bad the bedding failure is, and access to the apron. You pay for the part and the labor as separate line items on a written price, so you can see exactly what you’re buying. Every Sunrise Manor job is covered by our written guarantee, and our 365-Day Done Right Promise means if the work isn’t right within a year of completion, we make it right at no cost to you.
DIY or Call Us?
You can safely check your own setup before calling. Look for lifted trim, measure the total edge height, note any wobble underfoot, and check whether water pools at the low side after rain. Photograph what you find.
What we’d stop short of is prying up edge pavers and re-bedding a profile on a slope yourself. The pavers you lift can break or shift the whole edge, and the bedding and slope have to be right or the failure returns within a season. This isn’t high-tension or electrical work, but pavers set at grade need correct restraint and drainage to stay put. Call (855) 606-6122 and we’ll look at your photos, confirm the part, and give you a written price before anything starts.
FAQs

How long do Schluter driveway profiles last in Sunrise Manor?
A properly set Schluter profile should last 15 to 20 years or more here, but our sun and heat shorten that sharply when the paver bed under it fails first. The trim usually outlasts the bedding, not the other way around.
Can this be repaired instead of replaced?
Often yes. If the profile is sound and the pavers are stable, resetting or resealing the existing piece can cost a fraction of a replacement. We’ll tell you which path makes sense after we see it.
How long does the swap take?
A single trim strip replacement is usually a few hours. A full-length edge replacement with paver resetting runs a full day or two, depending on length and how much bedding needs rework.
How do you source the Schluter part?
We source the exact profile your drive needs, matched to your measurements, and confirm the compatible series before we arrive. We don’t claim to stock parts on a truck; we order and bring the verified part for your specific job.
We also service KraftMaid, Cambria, and Silestone products on projects where those come up alongside your hardscape work.
Call (855) 606-6122 for a free estimate. Tell us your Schluter profile, color, and the total edge height, and we’ll give you a written price for your Sunrise Manor driveway before any work begins. Our technicians have up to 22 years of experience, and every crew member is identity-verified and introduced to you by name and photo before the visit.
Written by the team at Mason Remodeling Sunrise Manor, serving Sunrise Manor and nearby areas.












