A Mason company - serving Sunrise Manor, NV
A remodeled primary bathroom with a soaking tub and a walk-in shower
Schluter · Sunrise Manor

Schluter Roofing in Sunrise Manor, NV

Free Estimate on SiteCalls Answered by a Live Person, 24/7Background-Checked TechniciansA Local Team in Sunrise Manor
A remodeled hall bathroom with subway tile and a floating vanity
A remodeled hall bathroom with patterned floor tile and painted walls
A low-threshold walk-in shower with a bench and grab bar
A powder room with botanical wallpaper and a stone sink
A wood double vanity with two mirrors after a bathroom remodel
A whole-home remodel with the living, dining and kitchen areas opened up
A second-story addition that matches the existing roofline
A galley kitchen opened up to the dining room with a new peninsula
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate

Schluter Roofing: The Sunrise Manor Owner’s Guide

Schluter roofing systems installed in Sunrise Manor typically run $8,000 to $20,000 for a full roof replacement, while repairs to Schluter edge profiles, drip trim and waterproofing membranes usually fall in the $400 to $1,800 range. We schedule these installs within a few days of your free estimate, not weeks. We’re an independent contractor and not affiliated with Schluter, but we work with their systems regularly across Sunrise Manor.

Call (855) 606-6122

Most owners discover a failure the same way. A brown ring spreads across a ceiling corner after a summer monsoon. Or the metal drip edge at the fascia starts curling away from the wall and you can see daylight behind it. Sometimes it’s simpler: the trim strip at the roof edge is loose, rusted, or missing screws after a wind event. Sunrise Manor’s heat and dust cycles punish these edges faster than most homeowners expect, and by the time the stain shows up, the underlying waterproofing has usually been compromised for a season or two.

Which Schluter Models This Applies To

Schluter’s roofing line runs through its KERDI and DITRA family for waterproofing and uncoupling, plus the SCHIENE and RONDEC edge profiles that trim tile-to-roof transitions. If your home has a tile roof, the waterproofing underlayer is likely KERDI membrane or a KERDI-BOARD panel, and the edge trim at the roof-to-wall junction is likely a SCHIENE profile. Check the printed label on the membrane roll or the stamped text on the profile itself; the model number and dimensions are usually there. The most common gotcha we see in Sunrise Manor is a homeowner matching a KERDI-BOARD thickness to the wrong tile bed, which throws off the whole transition. Get the thickness right (5mm, 9mm, 12.5mm, 19mm, 25mm, 38mm and 50mm are the standard options) and the rest usually follows. On the OEM-vs-aftermarket question: Schluter systems are proprietary, and matching profiles from other manufacturers often don’t seat correctly. We source genuine Schluter parts for anything on the roof envelope.

Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence

Signs Your Schluter Roofing Is Failing

  • Water stains on ceiling or interior walls after rain. The membrane has likely separated at a seam or failed around a penetration like a vent boot. This shows up fast during a Sunrise Manor monsoon.
  • Curling or lifting edge trim. SCHIENE or RONDEC profiles lift when the adhesive or mortar bond fails, usually from thermal expansion in summer heat cycling.
  • Visible cracks in the waterproofing membrane. UV exposure and age break down the fleece backing on KERDI. Once the backing separates, water passes through.
  • Loose or missing fasteners at the drip edge. Wind events and heat expansion pull screws; missing fasteners allow the edge to lift and water to wick behind it.
  • Efflorescence or white chalky streaks on tile edges. This signals moisture trapped behind the membrane, often at the transition where two profiles meet.
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Replacement Cost & What’s Included

A tile setter installing wall tile in a shower

Installed prices for Schluter-compatible roofing work in Sunrise Manor:

  • Full roof replacement with Schluter edge and membrane system: $8,000 to $20,000, depending on square footage, roof pitch and how much of the existing assembly can be reused.
  • Targeted repair (edge profile, membrane patch, drip trim re-set): $400 to $1,800.
  • Tile roof repair involving Schluter waterproofing underlayer: $600 to $2,500.

What drives the range: roof size, pitch, whether existing decking needs replacement, and how much of the membrane can be salvaged. Every quote is a written line-item price before we start; we don’t do verbal estimates. Your work is covered by our written guarantee, with a free return visit if a repair or installation fails.

DIY or Call Us?

You can safely check a few things yourself: look for water stains, run a hand along the edge trim to feel for lifting, check the label on your membrane roll to identify the model. What you shouldn’t do is re-seat a Schluter profile or patch a KERDI membrane on a steep or elevated roof. Roof work involves heights and the transition between the waterproofing envelope and the tile layer, and a mistake there means water inside the wall cavity within a month. The membrane bond also has to be set under specific conditions; a DIY patch on a hot day often fails before the season is out. If you’re not sure, call us. We’ll tell you straight whether it’s a repair or a replacement, and you’ll have the written price in hand before any tool comes out. Call (855) 606-6122.

FAQs

A stone counter, tile backsplash and open shelf after a kitchen remodel

Ideas for every room in the house

Built-ins, window seats, family rooms and staircases: the changes that make a whole house work better.

Read our remodeling guides
A dining nook with a built-in banquetteA home office with a built-in desk and shelvesA remodeled kitchen with a waterfall island and wood cabinetsAn open living space after a whole-home remodelA finished backyard cottage with a small covered porchA remodeled living room with built-in shelves around the fireplace

Explore more remodels

Every project below starts the same way: a free on-site visit and a written price.

Getting started with Mason in Sunrise Manor

Every project starts with a conversation and a written price. Here is how to take the first step.

A project lead measuring a kitchen with the homeowner during a free estimate

Free on-site estimate

A project lead walks the job with you, measures it and hands you a written, line-item price. No obligation.

Book an estimate
A remodeling crew arriving at a home with lumber and tools

Your Sunrise Manor team

A local vetted partner works across Sunrise Manor and the towns around it, to the same written standard as every Mason job.

Areas we serve
A worker laying floor protection and a dust barrier before work starts

Read our written promise

What we promise on every job, written down, with the terms spelled out before any work starts.

Our promise
Need Construction help nationwide? Licensed & insured · free written estimates
Call (855) 606-6122
Local Service Coverage

Request a Free Estimate in Sunrise Manor

Tell us what you need - Mason Remodeling Sunrise Manor responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Text Us
Call Now - 24/7 Dispatch