A Mason company - serving Sunrise Manor, NV
A remodeled primary bathroom with a soaking tub and a walk-in shower
Delta · Sunrise Manor

Delta Bathroom Remodeling in Sunrise Manor, NV

Free Estimate on SiteCalls Answered by a Live Person, 24/7Background-Checked TechniciansA Local Team in Sunrise Manor
A remodeled hall bathroom with subway tile and a floating vanity
A remodeled hall bathroom with patterned floor tile and painted walls
A low-threshold walk-in shower with a bench and grab bar
A powder room with botanical wallpaper and a stone sink
A wood double vanity with two mirrors after a bathroom remodel
A remodeled living room with built-in shelves around the fireplace
A single-story rear room addition with tall windows and a new patio
An open kitchen and dining area after a remodel
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate

Delta Bathroom Remodeling: The Sunrise Manor Owner’s Guide

Delta bathroom fixtures and shower systems are among the most repairable products in a Sunrise Manor home, and most repairs we handle come in between $145 and $520 for the part plus installation when the valve body is still sound. When the cartridge, trim, or shower assembly has reached the end of its service life and the surrounding tile or surround is failing with it, a full Delta bathroom remodel in Sunrise Manor runs $9,000 – $28,000, with a written price before any work starts. Owners usually find out something is wrong the same way: a drip that won’t stop, a handle that turns too far or feels loose, water pooling at the base of the shower, or a temperature that swings without warning mid-shower.

Call (855) 606-6122

Which Delta Models This Applies To

A tile setter installing wall tile in a shower

Delta’s residential line breaks into a few families that matter for parts matching. The Monitor and Monitor 14 series use a pressure-balance cartridge (the RP number stamped on the retaining nut is the one you need). The 17/17T series adds thermostatic control and takes a different cartridge entirely. Delta’s single-handle kitchen and lav faucets typically use the RP1991 or Diamond Seal cartridge depending on age, and the older two-handle stem units use compression stems that are still available. Shower-only valves from the 600 and 1300 series turn up constantly in Sunrise Manor homes built between 1978 and 1998, and those take a specific cartridge that is not interchangeable with the newer Monitor bodies.

To identify yours, look for the model number stamped on the escutcheon plate (the round trim cover behind the handle) or inside the valve body once the trim is off. Photograph the cartridge before you remove it; the length, the number of ports, and the shape of the retaining clip all matter. On the OEM-versus-aftermarket question, Delta’s own cartridges carry a limited lifetime warranty on the part for the original owner, while aftermarket equivalents often run $12 – $28 against $35 – $80 for OEM. For a valve you plan to keep another decade, OEM is the honest choice. We source directly from Delta and its authorized distributors; Mason Remodeling Sunrise Manor is an independent service provider and is not affiliated with Delta.

Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence

Signs Your Delta Bathroom Remodeling Is Failing

  • A drip from the spout that won’t stop. That’s a worn cartridge seal or a scored valve seat. In Sunrise Manor’s hard water, mineral scale accelerates both, and a drip you ignore for a season can etch the finish off the trim.
  • The handle turns loosely or needs a hard press to shut off. The cartridge is worn internally or the retaining nut has backed off. Left alone, this is how a valve body cracks.
  • Water temperature swings when someone flushes. On a Monitor valve, that points to a failed pressure-balance spool. It’s the safety function of the valve, so it’s worth fixing rather than living with.
  • Water at the base of the shower or a soft spot in the surround. The valve or shower arm has been leaking behind the wall. This is the one symptom that turns a $200 part into a $9,000 – $28,000 remodel, and the reason we open the wall before quoting.
  • Pitting or flaking on the trim and cartridge housing. Common in Sunrise Manor’s dry, mineral-heavy water. Once the cartridge bore is pitted, a new cartridge won’t seal; the valve body needs replacement.

Replacement Cost & What’s Included

A galley kitchen opened up to the dining room with a new peninsula

Here’s what the numbers look like for Sunrise Manor, parts and labor together:

Scope Installed Price Range
Cartridge replacement, single valve $145 – $320
Trim kit and cartridge, single valve $280 – $520
Shower valve body replacement (wall opened and closed) $650 – $1,400
Shower replacement $3,000 – $8,500
Tub-to-shower conversion $3,500 – $10,000
Walk-in shower installation $4,500 – $12,000
Bathroom vanity installation $800 – $3,000
Full bathroom remodel $9,000 – $28,000

What pushes you toward the top of a range: opening a wall and replacing tile, adding waterproofing and a Schluter strip (the metal trim that seals the edge where tile meets flooring), or upgrading to a thermostatic valve. We itemize the part, the labor, and the tile in the written price, and that price is delivered before any work starts. Every project carries a written guarantee with the coverage stated plainly and the 365-Day Done Right Promise; if anything we installed fails within a year of completion, we return at no cost. We also install KraftMaid, Cambria, and Silestone when a remodel includes cabinetry or surfaces.

Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

DIY or Call Us?

A cartridge swap on a Delta valve is genuinely within reach for a careful homeowner: shut the water, pull the retaining clip, twist out the old cartridge, and match the new one. Where DIY goes wrong is everything around it. If you strip the retaining nut, crack the valve body, or find the bore is pitted and the new cartridge won’t seal, you’re now in a wall-repair job. And if water has been leaking behind the tile, replacing the cartridge doesn’t fix the damage already done. On a valve body replacement or anything behind the wall, we recommend a trained professional: those jobs require shutting off the zone, cutting the wall, soldering or pressing new supply connections, and reinstalling waterproofing so it holds. We’ll always tell you honestly when a repair is the right call and when it isn’t. Call (855) 606-6122 for a free estimate.

FAQs

A remodeled family room with new windows and a window seat

Who You’ll Meet at the Door

Every Mason Remodeling Sunrise Manor crew member is background-checked and identity-verified under The Threshold Standard, and you’ll get their name and photo before the visit. They arrive in a clean uniform with a photo ID badge and introduce themselves at the door. A live person answers our phone 24 hours a day, every day of the year. That’s how a bathroom project should start: with certainty about who’s coming, and a price already in writing.

Call (855) 606-6122 to schedule your free estimate for your Sunrise Manor bathroom. We’ll inspect the valve, confirm the right part, and put a written price in your hands before any work begins.

Written by the team at Mason Remodeling Sunrise Manor, serving Sunrise Manor and nearby areas.

Ideas for every room in the house

Built-ins, window seats, family rooms and staircases: the changes that make a whole house work better.

Read our remodeling guides
A finished basement family room with a media wall and wet barA walk-in pantry with wood shelvingA remodeled laundry and mudroom with a bench, cubbies and painted cabinetsA finished backyard cottage with a small covered porchA whole-home remodel with the living, dining and kitchen areas opened upA second-story addition that matches the existing roofline

Explore more remodels

Every project below starts the same way: a free on-site visit and a written price.

Getting started with Mason in Sunrise Manor

Every project starts with a conversation and a written price. Here is how to take the first step.

A project lead measuring a kitchen with the homeowner during a free estimate

Free on-site estimate

A project lead walks the job with you, measures it and hands you a written, line-item price. No obligation.

Book an estimate
A remodeling crew arriving at a home with lumber and tools

Your Sunrise Manor team

A local vetted partner works across Sunrise Manor and the towns around it, to the same written standard as every Mason job.

Areas we serve
A worker laying floor protection and a dust barrier before work starts

Read our written promise

What we promise on every job, written down, with the terms spelled out before any work starts.

Our promise
Need Construction help nationwide? Licensed & insured · free written estimates
Call (855) 606-6122
Local Service Coverage

Request a Free Estimate in Sunrise Manor

Tell us what you need - Mason Remodeling Sunrise Manor responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Text Us
Call Now - 24/7 Dispatch