







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Dvele Construction in Paradise, NV
We provide independent Dvele construction and repair service across Paradise, NV. What makes our Dvele work here different is that Paradise is unincorporated, so every module seam we re-flash, every kitchen we rebuild, and every addition we tie in has to line up with Clark County’s inspection sequence and the airport-adjacent overlay review, not a city building department. We’re an independent Dvele service provider, not affiliated with or authorized by the manufacturer. Our technicians have up to 22 years of experience with factory-built modular homes. Call (855) 606-6122 for a free estimate.
Why Paradise Residents Choose Us for Dvele Service

Dvele homes are factory-assembled and craned onto a desert lot. That changes the work. The hard part isn’t framing; it’s the marriage line where the delivered module meets a site-built stem wall, the flashing that keeps wind-driven rain out of that joint, and the finish carpentry that has to survive transport settling and a 110°F summer. Our technicians have up to 22 years of experience reading those seams.
We know the Dvele single-family modular home, the Dvele ADU modules, and the custom modular packages with a solar-ready roof. When a part needs replacing we source OEM-spec components and sealants matched to the factory spec wherever they exist, and we tell you plainly when quality aftermarket is the better call. Every visit includes a written price before work starts. Uniformed, background-checked technicians, and you receive the technician’s name and photo before we knock. The Dvele service we deliver across Paradise is built around that seam-first approach.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Common Dvele Construction Problems We Solve in Paradise
- Module-to-foundation seam and flashing failures. The box meets the stem wall, and any gap left at the marriage line gets worked by desert sun and monsoon wind-blown rain. In Paradise, that seam is the first place water shows up.
- Thermal movement at exterior panel joints. Paradise swings from 110°F summer highs to cool winter nights. That cycle cracks caulk and sealant lines at panel joints and trim, and the cracks widen every season.
- Low-slope modular roof sections and gutter runs. Flat and low-slope roof sections pond and overflow during flash-flood washes, backing water under roof edge terminations. This is where most Paradise roof leaks start.
- Factory finishes that settle after craning. Cabinets, doors, drawers, and drywall seams shift after transport and lifting. They often don’t show until the first summer of heat cycling, then never quite close right.
- Solar-ready roof penetrations that weren’t flashed for this climate. The custom modular packages come solar-ready, and those penetration points need heat-rated flashing. In Paradise, a generic boot fails fast.
Dvele Service in Paradise: What Local Conditions Mean for Your Equipment
Here’s the fact that shapes every Dvele job in Paradise: this is an unincorporated Clark County township, not a city, so a Dvele home or Dvele-module addition is permitted through Clark County rather than a municipal building department, and it sits in the airport-adjacent overlay zone that adds review steps to site work. Combine that with a construction market split between the Strip resort corridor’s constant renovation churn and the smaller infill and remodel work in the surrounding residential pockets, and you get a scheduling reality no neighboring city shares. The county review has to be sequenced against the factory’s delivery date, not run after it. A typical Paradise Dvele homeowner notices water staining or a soft spot along the roof-to-wall marriage line after monsoon season, because that seam was flashed for a generic climate and not for wind-driven rain off a low-slope modular roof. A qualified local pro will inspect the seam and gutter terminations, re-flash with heat-rated materials, verify the flashing laps over the panel joint rather than under it, and confirm the fix before the next summer heat cycle opens a new gap.
Dvele Models & Products We Service in Paradise
We work on the Dvele single-family modular home, Dvele accessory dwelling unit modules, and Dvele custom modular home packages with a solar-ready roof. Because Dvele is a modular manufacturer, the right call is OEM-spec components and sealants matched to the factory spec wherever they exist. Quality aftermarket stands in only where OEM is unavailable or where a design detail was never meant to last in the desert. We don’t keep local parts stock. Each job is scoped, parts are sourced to the spec, and you see the written price before a tool comes out. That honesty about repair-versus-replace is part of the Dvele service we bring to every Paradise home.
See the difference
Before
After
Before
After
Before
AfterDvele Service Pricing in Paradise
Real dollar ranges so you can self-qualify before you call. Roof repair on a Dvele modular home runs $400 to $1,800, depending on how much seam and flashing work the marriage line needs. A small kitchen remodel runs $9,000 to $20,000. A home addition runs $45,000 to $130,000, and on a Dvele lot that figure includes the county permit sequence and overlay review. What drives cost: the scope of the roof section, whether panels need reworking or just re-sealing, and how much the county review adds to the timeline. Your free estimate includes a written line-item price, a look at the seams and terminations, and a clear repair-versus-replace recommendation. The price you get is the price you pay. Call (855) 606-6122 for your free estimate.
| Dvele Service in Paradise | Typical Price Range |
|---|---|
| Roof Repair | $400 – $1,800 |
| Small Kitchen Remodel | $9,000 – $20,000 |
| Home Addition | $45,000 – $130,000 |
Serving Paradise, NV – Our Local Coverage Area
We serve Paradise and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Dvele Construction in Paradise
Does a Dvele modular home in Paradise need Clark County permits for a roof or addition? Yes. Because Paradise is unincorporated, roof work that changes structure and any addition must be permitted through Clark County, not a city building department. An addition also passes through the airport-adjacent overlay review. We pull the permits and sequence the inspections to the factory’s delivery schedule. Call (855) 606-6122 to get the scope on paper.
Why does my Dvele roof seam leak after monsoon season? The roof-to-wall marriage line was flashed for a generic climate, and wind-driven rain off a low-slope modular roof finds the gap. Re-flashing with heat-rated materials and verifying the lap direction fixes it. We inspect the seam and gutter terminations and confirm the repair before the next heat cycle. Call (855) 606-6122 for a roof repair estimate.
Will a Dvele kitchen or bath remodel need county inspections in Paradise? Yes, if the work touches plumbing, electrical, or structure. Cosmetic swaps may not. The county review has to be sequenced correctly rather than run after the fact. We tell you which line of your remodel triggers an inspection before anything starts. Call (855) 606-6122 for a written scope.
How does the Las Vegas heat affect a Dvele modular home in Paradise? The 110°F summer highs and cool winter nights cycle the exterior panel joints and trim, which cracks sealant and opens seams. Factory finishes also settle after craning, often showing up after the first summer. Heat-rated sealants and correct flashing protect the joints. Call (855) 606-6122 for a look at your seams.
Can I get OEM Dvele parts for repairs in Paradise? Where OEM-spec components and sealants exist, yes, we source them to the factory spec. Where OEM is unavailable or a design detail wasn’t built for this climate, quality aftermarket stands in and we tell you why. We don’t keep local stock; parts are sourced per job. Call (855) 606-6122 and we’ll map the parts list.
Service Areas Near Paradise
We serve Dvele homeowners across Paradise and the surrounding Paradise service area. Nearby we cover Winchester, Whitney, Sunrise Manor, North Las Vegas, and Henderson. If your Dvele home sits anywhere in the township or just outside it, ask and we’ll confirm coverage.
Book Your Dvele Service in Paradise Today
Whether it’s a roof seam leaking after the last monsoon or a full kitchen remodel on a Dvele lot, the first step is a free estimate with a written price. Call (855) 606-6122 to schedule yours. Live person answers around the clock, every day. Our technicians have up to 22 years of experience, and every completed project carries our written 365-Day Done Right Promise.
Written by the team at Mason Remodeling Sunrise Manor.












