A Mason company - serving Sunrise Manor, NV
A new rear addition with a vaulted beamed ceiling and tall windows
Dvele · Sunrise Manor

Dvele Construction Service in Sunrise Manor, NV

Free Estimate on SiteCalls Answered by a Live Person, 24/7Background-Checked TechniciansA Local Team in Sunrise Manor
A second-story addition that matches the existing roofline
A wide opening with a new beam where the kitchen wall was removed
A small remodeled galley kitchen with cabinets to the ceiling
A low-threshold walk-in shower with a bench and grab bar
A finished basement family room with a media wall and wet bar
A walk-in pantry with wood shelving
A powder room with botanical wallpaper and a stone sink
A remodeled laundry and mudroom with a bench, cubbies and painted cabinets
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate

Why Sunrise Manor Homeowners Choose Dvele Construction

We provide independent Dvele construction service in Sunrise Manor, NV, for owners of Dvele Custom Series, Signature Series, and ADU Series homes. What sets our Dvele work apart is that we treat modular walls as modular walls: panel seams, factory-set windows, and site-built framing joints each fail differently here, and we plan around that. We’re not affiliated with or authorized by Dvele, and we never pretend otherwise. Our credentials come from solving the site-level problems that factory-built homes run into once they’re set on a slab in this township. Our technicians have up to 22 years of experience with modular and site-built construction. Call (855) 606-6122 for a free estimate.

Call (855) 606-6122

Why Trust Mason Remodeling Sunrise Manor for Your Dvele Construction?

A finished backyard cottage with a small covered porch

Sunrise Manor is unincorporated, so almost all construction work here runs through Clark County’s building department rather than a municipal one. That matters for Dvele owners because panel reinforcement, window flashing repair, and layout changes inside a modular shell all need permits pulled at the county counter, and we do that as a matter of course.

We work with Dvele systems often enough to know the tolerances: how much deflection a wall-to-floor junction can take before a seam opens, which sealants stay flexible through a desert summer, and where factory-installed window flashing typically gets compromised during site assembly. We source Dvele-spec finishes and hardware through approved suppliers so colors and profiles stay compatible, and we recommend quality aftermarket options for non-structural pieces when they fit better or arrive faster.

Every job starts with a written price before any work begins, and a background-checked, uniformed technician whose name and photo reach you before the visit. Under The Threshold Standard, you’ll know exactly who is at your door and what the job costs before anyone picks up a tool. Every completed project carries our 365-Day Done Right Promise: if the work isn’t right within a year of completion, we make it right at no cost to you.

Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence

Common Dvele Construction Problems We Fix in Sunrise Manor

These are the Dvele issues we see most in Sunrise Manor homes, and why they happen.

  • Panel seam separation at wall-to-floor junctions. Sunrise Manor’s long stretches of 1980s-era slab-on-grade tract lots sit on soils that move with moisture cycles, and a modular shell rigidly tied to a settling slab will open at the seams. You’ll see a hairline crack that widens with each hot summer.
  • Moisture intrusion at factory-installed windows and doors. The flashing around Dvele’s factory openings is sound leaving the plant, but site assembly and monsoon-season wind-driven rain can compromise it. A water stain on interior drywall under a window usually points to flashing, not glass.
  • Finish cracking along drywall seams where panels meet site-built framing. The modular panels and the site-built sections expand at slightly different rates under desert UV and heat. Drywall compound that isn’t flexible enough will telegraph that movement as cracks within a season or two.
  • Cabinet and millwork misalignment at floor transitions. Where a factory section meets site-built floor, a small difference in elevation becomes a visible gap under the cabinets or a door that won’t sit flush. It’s an alignment problem, not a cabinet defect.
  • Exterior stucco and paint failure on modular walls. Summer highs here routinely pass 105°F with intense UV, and exterior finishes on a modular shell fail faster than on site-built stucco unless the seams are properly flashed and the coating is rated for the heat.

A common Dvele issue in Sunrise Manor is panel seam separation along exterior walls, often caused by foundation settling or thermal expansion. A qualified local pro typically assesses the cause, reinforces connections, and applies flexible sealants and finishes to restore a seamless look.

Dvele Parts & Our Repair-vs-Replace Approach

A room opened to the studs with new wiring and plumbing

We source Dvele-spec finishes and hardware through approved suppliers so replacement pieces match the original color, profile, and fit. We don’t stock Dvele parts locally; each job gets sourced to match what’s actually on your home, which is the only way to keep compatibility intact.

For non-structural elements, we’ll tell you plainly when a high-quality aftermarket alternative gives you better value or availability than chasing a discontinued Dvele part. For the shell itself, the decision is more careful. If panel connections and framing are sound, reinforcement and flexible finishing will outlast a rebuild. If the modular structure has moved enough that seams keep reopening, we’ll say so and walk you through what replacement actually involves.

We make repai
versus replace recommendations based on the condition of the modular shell and your long-term plans for the home, and we put the recommendation in writing with a line-item price before any work starts. Call (855) 606-6122 for a free estimate.

Our Dvele Service Process – Step by Step

  1. 1
    Diagnosis. We inspect the panel junctions, window and door flashing, and the transition between factory and site-built sections, and we identify whether the cause is settlement, thermal movement, moisture, or all three.
  2. 2
    Written price. You receive a line-item written price before any work begins, so you can see exactly what’s covered. No verbal estimate that grows on the final bill.
  3. 3
    Repair or installation. We reinforce connections, replace compromised flashing, and use sealants and finishes rated for desert heat. Permits are pulled through Clark County where the work requires them.
  4. 4
    Test. We check the repaired seams under water and heat conditions, verify window drainage paths, and confirm that drywall and millwork sit flush at the junctions.
  5. 5
    Warranty. Every completed project is covered by our written guarantee with clearly stated terms, and if a repair or installation fails, we return free of charge.
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Dvele Products We Service & Install in Sunrise Manor

We service and install across the Dvele lineup: the Custom Series architectural modular homes, the Signature Series pre-designed modular layouts, and the ADU Series accessory dwelling units. On the interior side, our work focuses on full kitchen remodeling, full bathroom remodeling, and tile and flooring, which is where Dvele owners in Sunrise Manor most often need the factory shell and the finished interior brought into alignment. That includes refitting cabinets to uneven floor transitions, re-tiling over reinforced subfloor, and reworking bathroom wet walls where a modular panel meets site plumbing.

We Also Service These Brands

We’re not a single-brand shop. Alongside Dvele work, we handle projects built around KraftMaid cabinetry, Cambria and Silestone surfaces, and Kohler fixtures, which means we can bring everything on a Dvele interior remodel under one written price instead of sending you to three different trades. If your kitchen mixes a Dvele shell with KraftMaid cabinets or Cambria counters, we plan the whole job together.

FAQs – Dvele Construction Service in Sunrise Manor

A framer checking new wall framing on a home addition

Is Mason Remodeling Sunrise Manor authorized by Dvele? No. We are an independent Dvele service provider and are not affiliated with, authorized by, or endorsed by Dvele. Our work is based on hands-on experience with Dvele modular systems in Sunrise Manor, not on a manufacturer relationship.

Do you use genuine Dvele/OEM parts? We source Dvele-spec finishes and hardware through approved suppliers to keep compatibility with your home, and we recommend quality aftermarket alternatives for non-structural elements when they offer better value or availability. We’ll tell you which is which before you commit.

How long does Dvele service take? A panel seam repair or window flashing fix is often a single visit. A full kitchen or bathroom remodel inside a Dvele home typically runs several weeks depending on scope. You’ll get a clear timeline in the written price before work begins. Call (855) 606-6122 for an exact schedule.

What Dvele models/series do you cover? We service the Dvele Custom Series, Signature Series, and ADU Series. If you’re not sure which series your home is, we can identify it during the estimate visit.

Will service void my Dvele warranty? Properly permitted, correctly executed repairs shouldn’t void your Dvele warranty, but you should confirm the specific terms with Dvele directly. We document our work so you have a clear record if a warranty question comes up. Call (855) 606-6122 to discuss your situation.

How much does Dvele construction cost in Sunrise Manor? Interior remodeling in a Dvele home runs in the same ranges as site-built work here: a full kitchen remodel typically lands between $14,000 and $45,000, a full bathroom remodel between $9,000 and $28,000, and tile and flooring between $800 and $2,500 per square foot depending on material. Call (855) 606-6122 for an exact quote, estimates are free.

Dvele Service Price Ranges in Sunrise Manor

Service Typical Range
Full Kitchen Remodel $14,000 – $45,000
Full Bathroom Remodel $9,000 – $28,000
Tile & Flooring (per square foot) $800 – $2,500

Can you modify a Dvele modular home’s layout after installation? Yes, interior layout changes inside a Dvele shell are possible. We assess which walls are structural to the modular system before any removal, pull the Clark County permits, and plan the work around the panel joints so the shell stays sound. Call (855) 606-6122 for a free estimate.

How do you handle warranty concerns on Dvele homes? We document every repair with photos and notes and keep the work warranty-safe, so if a Dvele warranty question arises you have a clear record. Any manufacturer warranty terms should be confirmed with Dvele yourself. Every project we complete also carries our own written 365-Day Done Right Promise. Call (855) 606-6122 to talk it through.

What’s the best way to address moisture issues around Dvele windows? Find the source at the flashing first, not the glass. Factory-installed openings often leak where site-assembly flashing was compromised, so we open the joint, replace the flashing, and re-seal with a product rated for monsoon wind-driven rain. Call (855) 606-6122 for a free inspection.

Do you recommend repairing or replacing Dvele factory cabinets? Repair first if the boxes and doors are structurally sound; we can realign and re-shim to correct uneven floor transitions at no need for replacement. Replace only when the cabinet body has swollen or failed. We’ll give you a written recommendation either way. Call (855) 606-6122 for a free estimate.

How does Sunrise Manor’s climate affect Dvele home exteriors? Summer highs over 105°F, intense UV, and monsoon microbursts accelerate stucco and paint failure and stress panel seams. The right flexible sealants and heat-rated coatings protect a modular exterior far longer than standard finishes. Call (855) 606-6122 to schedule a free exterior assessment.

Book Your Dvele Service in Sunrise Manor, NV

Whether you’re dealing with a seam that keeps reopening, a window that leaks during monsoon season, or a full kitchen remodel inside your Dvele home, we’ll put a written price in front of you before any work begins, backed by our 365-Day Done Right Promise. Call (855) 606-6122 to schedule your free estimate.

Written by the team at Mason Remodeling.

Ideas for every room in the house

Built-ins, window seats, family rooms and staircases: the changes that make a whole house work better.

Read our remodeling guides
A remodeled family room with new windows and a window seatA stone counter, tile backsplash and open shelf after a kitchen remodelA remodeled hall bathroom with subway tile and a floating vanityA remodeled primary suite with built-in wardrobes and a window seatNew painted shaker cabinets with an organized deep drawerA remodeled hall bathroom with patterned floor tile and painted walls

Explore more remodels

Every project below starts the same way: a free on-site visit and a written price.

Getting started with Mason in Sunrise Manor

Every project starts with a conversation and a written price. Here is how to take the first step.

A project lead measuring a kitchen with the homeowner during a free estimate

Free on-site estimate

A project lead walks the job with you, measures it and hands you a written, line-item price. No obligation.

Book an estimate
A remodeling crew arriving at a home with lumber and tools

Your Sunrise Manor team

A local vetted partner works across Sunrise Manor and the towns around it, to the same written standard as every Mason job.

Areas we serve
A worker laying floor protection and a dust barrier before work starts

Read our written promise

What we promise on every job, written down, with the terms spelled out before any work starts.

Our promise
Need Construction help nationwide? Licensed & insured · free written estimates
Call (855) 606-6122
Local Service Coverage

Request a Free Estimate in Sunrise Manor

Tell us what you need - Mason Remodeling Sunrise Manor responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Text Us
Call Now - 24/7 Dispatch