







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Why Sunrise Manor Homeowners Choose ViewLux Construction
We provide independent ViewLux construction and repair service in Sunrise Manor, NV, specializing in frameless glass shower enclosures and walk-in shower work. What sets our ViewLux service apart is that we diagnose against the specific hardware failure points these enclosures actually develop – hinge sag, roller wear, seal sweeps, hard-water etching – instead of pushing a full replacement on the first call. Mason Remodeling Sunrise Manor is an independent ViewLux service provider and is not affiliated with, authorized by, or endorsed by ViewLux; our expertise comes from daily hands-on work, not from the factory.
Sunrise Manor is an unincorporated township, so nearly all permitted shower and bathroom work here runs through Clark County’s building department rather than a municipal office. That matters on these jobs – a permit pulled correctly keeps your enclosure and plumbing position clean and your warranty intact.
Call (855) 606-6122 for a free estimate.
Why Trust Mason Remodeling Sunrise Manor for Your ViewLux Construction?

Our technicians have up to 22 years of experience, and that time shows up in the details on glass work. We know the ViewLux frameless hinged door on 3/8-inch tempered glass weighs enough that the hinge has to land on solid blocking, not drywall or thin tile backer. We know the sliding bypass series depends on matched rollers and a lower guide that flattens out over time. We know a neo-angle corner enclosure has three load points that all have to stay true, and a fixed panel with support bars has to be anchored so the glass doesn’t carry stress it wasn’t cut for.
We work warranty-safe: we use OEM ViewLux hinges, rollers, and seal kits when they’re available so the enclosure keeps its original fit and warranty position, and when a part is discontinued we source a quality aftermarket match sized to the glass thickness and track profile.
Every crew member is identity-verified through The Threshold Standard, and you receive the technician’s name and photo before the visit, plus a photo ID badge at the door. A written price is delivered before any work begins.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Common ViewLux Construction Problems We Fix in Sunrise Manor
These enclosures fail in predictable ways. Here is what we actually see and why it happens:
- Hinge sag and screw pull-out on 3/8-inch frameless hinged doors. The heavy glass gradually drops because the hinge fasteners were anchored into drywall or thin tile backer instead of solid blocking. The door drags at the bottom and won’t close flush. Re-anchoring with proper backing and new hinges usually solves it.
- Roller and track wear on the sliding bypass series. Rollers flatten and the lower guide deteriorates, so the glass begins to bind, drop, or jump the track. This is hardware, not glass – a roller and track rebuild puts the door back on a smooth glide.
- Seal strip and sweep degradation. Yellowed or hardened vinyl sweeps let water escape onto the curb and floor. Homeowners read it as a leak when the glass itself is fine. Fresh sweeps sized to the glass and curb close the gap.
- Hard-water spotting and mineral etching on the glass. Southern Nevada’s water is mineral-heavy, and the film that builds on the glass is often mistaken for a defect. Sometimes it’s surface scale that cleans up; sometimes it’s etched into the glass permanently, and we tell you which.
- Support bar and fixed-panel stress on neo-angle and fixed-panel enclosures. A support bar anchored out of level or a panel set on an uneven curb puts load on the glass it wasn’t cut for. We reset the panel and bar so the glass sits neutral.
ViewLux Parts & Our Repair-vs-Replace Approach

Parts get sourced per job. We don’t keep a local stock of ViewLux hardware – we order the OEM roller, hinge, or seal kit that matches your enclosure when it’s available, so the fit and warranty position stay intact. When a part is discontinued or slow to arrive, a quality aftermarket roller or sweep matched to the glass thickness and track profile is a sound substitute, and we say so plainly.
Replacement is the honest call when the glass is chipped, the hinge holes are worn or elongated, or the panel is no longer made. Repairing hardware on damaged tempered glass is a risk nobody needs. We’ll tell you which side of that line your enclosure is on.
Call (855) 606-6122 for a free written estimate on your Sunrise Manor enclosure.
Our ViewLux Service Process – Step by Step
- 1
Diagnose. We inspect the hinges, rollers, track, sweeps, and glass edges, check whether the mounting points are backed with solid blocking, and separate hardware wear from glass damage.
- 2
Quote in writing. Before any work starts, you get a written price with line items – repair hardware versus replace glass versus full enclosure – so you’re choosing, not guessing.
- 3
Repair or install. We re-anchor hinges with proper backing, rebuild tracks and rollers, replace seals, or install a new ViewLux enclosure, using OEM-compatible parts sized to your glass and profile.
- 4
Test. We operate the door, check the sweep seal against the curb and floor, and confirm the door closes flush and the panel sits level.
- 5
Guarantee. Every project carries a written guarantee with plainly stated terms – what’s covered, what’s excluded, and for how long, 365 days from the completion date. If a repair or installation fails, a free return visit is provided at no charge.
See the difference
Before
After
Before
After
Before
AfterViewLux Products We Service & Install in Sunrise Manor
We handle the full ViewLux frameless range: the hinged shower doors on 3/8-inch tempered glass, the sliding glass bypass series, the fixed glass shower panels with support bars, and the neo-angle corner enclosures. On the installation side, that covers walk-in shower installation and full walk-in shower and shower remodeling – tub-to-shower conversions, shower replacement, and the tile and waterproofing behind the glass. Because Sunrise Manor’s housing is mostly 1980s – 2000s tract homes on slab with stucco over wood frame, we routinely open a wall behind an enclosure and find the original backer or framing needs correcting before new glass goes in.
We Also Service These Brands
We’re not single-brand dependent. Alongside ViewLux, our Sunrise Manor work spans KraftMaid cabinetry, Cambria, Silestone, and Kohler fixtures – so a shower remodel can carry through from the glass to the vanity and hardware without a second contractor. One written price, one crew standard, one guarantee.
FAQs – ViewLux Construction Service in Sunrise Manor

Is Mason Remodeling Sunrise Manor authorized by ViewLux? No. We are an independent ViewLux service provider and are not affiliated with, authorized by, or endorsed by ViewLux. Our knowledge comes from daily hands-on installation and repair work with these enclosures.
Do you use genuine ViewLux/OEM parts? Yes, whenever they’re available – OEM hinges, rollers, and seal kits keep the enclosure’s fit and warranty position. For discontinued or slow-to-source parts, we use a quality aftermarket match sized to your glass thickness and track profile.
How long does ViewLux service take? Hardware repairs like sweeps or roller replacement are usually a single visit. Hinge re-anchoring with proper blocking, or a full enclosure install, depends on what’s behind the wall, and we tell you the schedule in the written quote.
What ViewLux models/series do you cover? Hinged doors on 3/8-inch tempered glass, the sliding bypass series, fixed glass panels with support bars, and neo-angle corner enclosures.
Will service void my ViewLux warranty? We work warranty-safe by using OEM parts where they exist and fitting parts to the original glass and profile. We can’t speak for ViewLux’s terms, but we protect the enclosure’s original fit rather than forcing mismatched hardware.
How much does ViewLux construction cost in Sunrise Manor? A common scenario looks like this: a frameless door that swung fine for years suddenly drags and won’t close, and the homeowner assumes the enclosure needs replacing. The real cause is usually hinge sag from fasteners never backed with solid blocking, or worn bypass rollers – a qualified pro pulls the door, checks the blocking and glass holes, and either re-anchors with new hinges or rebuilds the track and rollers, replacing only the glass when the hinge holes are elongated or chipped. Typical ranges:
| Service | Price range |
|---|---|
| Walk-In Shower Installation | $4,500 – $12,000 |
| Tub-to-Shower Conversion | $3,500 – $10,000 |
| Shower Replacement | $3,000 – $8,500 |
| Bathroom Remodel | $9,000 – $28,000 |
| Small Bathroom Remodel | $5,000 – $12,000 |
| Bathroom Vanity Installation | $800 – $3,000 |
Call (855) 606-6122 for an exact quote on your Sunrise Manor enclosure – estimates are free.
Book Your ViewLux Service in Sunrise Manor, NV
If your ViewLux enclosure is dragging, leaking water onto the curb, or showing glass you think is ruined, one call settles it. Mason Remodeling Sunrise Manor sends identity-verified technicians, puts the price in writing before work starts, and backs the job with our 365-Day Done Right Promise. Call (855) 606-6122 for a free estimate.
Written by the team at Mason Remodeling Sunrise Manor.












